Optimization of Assembly Sequence

The assembly sequence is one of the most time consuming and expensive manufacturing activities. Assembly sequence affects many of product development design and production and is relevant to many life cycle issues of the product, so assembly sequence analysis should be part of early product design. The cost of assembly on an average is 10-30% of the manufacturing cost of a commercial product. The ratio between cost and performance of assembly has increased with respect to other types of the manufacturing process and in recent years, this fact has caused a growing interest by industry in this area. Robotic assembly which is comes under the assembly sequence and also comes under the automated assembly system incorporates the use of robots for performing the useful and time taking assembly tasks. A variety of optimization tools are available for application to problem. It is difficult to model the present as an n-p problem. Finding the best assembly sequence generation involves the conventional methods or soft computing methods by following the procedure of search algorithms. Optimization of a correct and stable assembly sequence is essential for automated, semi-automated or manual assembly systems. Assembly sequence affects flexible and advanced manufacturing system in many aspects such as use of tool, cost, time, layout of area etc. To solve this kind of problems or time consuming geometric reasoning in assembly sequence, this research proposes a method to determine stable assembly sequence. The objective of the present work is to stable, generate feasible and optimal assembly sequence satisfying the assembly constraint with minimum assembly cost. The present project aims at evolving an approach for generating assembly sequence using the evolutionary technique considering of the instability of assembly motion and/or directions. To elaborate the effectiveness of the method, one soft computing method is applied to generate the optimized sequence(s)

A versatile and reconfigurable microassembly workstation

In this paper, a versatile and reconfigurable microassembly workstation designed and realized as a research tool for investigation of the problems in microassembly and micromanipulation processes and recent developments on mechanical and control structure of the system with respect to the previous workstation are presented. These developments include: (i) addition of a manipulator system to realize more complicated assembly and manipulation tasks, (ii) addition of extra DOF for the vision system and sample holder stages in order to make the system more versatile (iii) a new optical microscope as the vision system in order to visualize the microworld and determine the position and orientation of micro components to be assembled or manipulated, (iv) a modular control system hardware which allows handling more DOF. In addition several experiments using the workstation are presented in different modes of operation like tele-operated, semiautomated and fully automated by means of visual based schemes

3D Printed Soft Robotic Hand

Soft robotics is an emerging industry, largely dominated by companies which hand mold their actuators. Our team set out to design an entirely 3D printed soft robotic hand, powered by a pneumatic control system which will prove both the capabilities of soft robots and those of 3D printing. Through research, computer aided design, finite element analysis, and experimental testing, a functioning actuator was created capable of a deflection of 2.17” at a maximum pressure input of 15 psi. The single actuator was expanded into a 4 finger gripper and the design was printed and assembled. The created prototype was ultimately able to lift both a 100-gram apple and a 4-gram pill, proving its functionality in two prominent industries: pharmaceutical and food packing

Development of a truss joint for robotic assembly of space structures

This report presents the results of a detailed study of mechanical fasteners which were designed to facilitate robotic assembly of structures. Design requirements for robotic structural assembly were developed, taking into account structural properties and overall system design, and four candidate fasteners were designed to meet them. These fasteners were built and evaluated in the laboratory, and the Hammer-Head joint was chosen as superior overall. It had a high reliability of fastening under misalignments of 2.54 mm (0.1 in) and 3 deg, the highest end fixity (2.18), the simplest end effector, an integral capture guide, good visual verification, and the lightest weight (782 g, 1.72 lb). The study found that a good design should incorporate chamfers sliding on chamfers, cylinders sliding on chamfers, and hard surface finishes on sliding surfaces. The study also comments on robot flexibility, sag, hysteresis, thermal expansion, and friction which were observed during the testing

Automatic Romaine Heart Harvester

The Romaine Robotics Senior Design Team developed a romaine lettuce heart trimming system in partnership with a Salinas farm to address a growing labor shortage in the agricultural industry that is resulting in crops rotting in the field before they could be harvested. An automated trimmer can alleviate the most time consuming step in the cut-trim-bag harvesting process, increasing the yields of robotic cutters or the speed of existing laborer teams. Leveraging the Partner Farm’s existing trimmer architecture, which consists of a laborer loading lettuce into sprungloaded grippers that are rotated through vision and cutting systems by an indexer, the team redesigned geometry to improve the loading, gripping, and ejection stages of the system. Physical testing, hand calculations, and FEA were performed to understand acceptable grip strengths and cup design, and several wooden mockups were built to explore a new actuating linkage design for the indexer. The team manufactured, assembled, and performed verification testing on a full-size metal motorized prototype that can be incorporated with the Partner Farm’s existing cutting and vision systems. The prototype met all of the established requirements, and the farm has implemented the redesign onto their trimmer. Future work would include designing and implementing vision and cutting systems for the team’s metal prototype

Ground Robotic Hand Applications for the Space Program study (GRASP)

This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time