Cross-layer Soft Error Analysis and Mitigation at Nanoscale Technologies

This thesis addresses the challenge of soft error modeling and mitigation in nansoscale technology nodes and pushes the state-of-the-art forward by proposing novel modeling, analyze and mitigation techniques. The proposed soft error sensitivity analysis platform accurately models both error generation and propagation starting from a technology dependent device level simulations all the way to workload dependent application level analysis

Evaluating critical bits in arithmetic operations due to timing violations

Various error models are being used in simulation of voltage-scaled arithmetic units to examine application-level tolerance of timing violations. The selection of an error model needs further consideration, as differences in error models drastically affect the performance of the application. Specifically, floating point arithmetic units (FPUs) have architectural characteristics that characterize its behavior. We examine the architecture of FPUs and design a new error model, which we call Critical Bit. We run selected benchmark applications with Critical Bit and other widely used error injection models to demonstrate the differences

Reliable Software for Unreliable Hardware - A Cross-Layer Approach

A novel cross-layer reliability analysis, modeling, and optimization approach is proposed in this thesis that leverages multiple layers in the system design abstraction (i.e. hardware, compiler, system software, and application program) to exploit the available reliability enhancing potential at each system layer and to exchange this information across multiple system layers

SSRESF: Sensitivity-aware Single-particle Radiation Effects Simulation Framework in SoC Platforms based on SVM Algorithm

The ever-expanding scale of integrated circuits has brought about a significant rise in the design risks associated with radiation-resistant integrated circuit chips. Traditional single-particle experimental methods, with their iterative design approach, are increasingly ill-suited for the challenges posed by large-scale integrated circuits. In response, this article introduces a novel sensitivity-aware single-particle radiation effects simulation framework tailored for System-on-Chip platforms. Based on SVM algorithm we have implemented fast finding and classification of sensitive circuit nodes. Additionally, the methodology automates soft error analysis across the entire software stack. The study includes practical experiments focusing on RISC-V architecture, encompassing core components, buses, and memory systems. It culminates in the establishment of databases for Single Event Upsets (SEU) and Single Event Transients (SET), showcasing the practical efficacy of the proposed methodology in addressing radiation-induced challenges at the scale of contemporary integrated circuits. Experimental results have shown up to 12.78X speed-up on the basis of achieving 94.58% accuracy.Comment: Accepted to the 61th ACM/IEEE Design Automation conference (DAC 2024

Towards Accurate Estimation of Error Sensitivity in Computer Systems

Fault injection is an increasingly important method for assessing, measuringand observing the system-level impact of hardware and software faults in computer systems. This thesis presents the results of a series of experimental studies in which fault injection was used to investigate the impact of bit-flip errors on program execution. The studies were motivated by the fact that transient hardware faults in microprocessors can cause bit-flip errors that can propagate to the microprocessors instruction set architecture registers and main memory. As the rate of such hardware faults is expected to increase with technology scaling, there is a need to better understand how these errors (known as ‘soft errors’) influence program execution, especially in safety-critical systems.Using ISA-level fault injection, we investigate how five aspects, or factors, influence the error sensitivity of a program. We define error sensitivity as the conditional probability that a bit-flip error in live data in an ISA-register or main-memory word will cause a program to produce silent data corruption (SDC; i.e., an erroneous result). We also consider the estimation of a measure called SDC count, which represents the number of ISA-level bit flips that cause an SDC.The five factors addressed are (a) the inputs processed by a program, (b) the level of compiler optimization, (c) the implementation of the program in the source code, (d) the fault model (single bit flips vs double bit flips) and (e)the fault-injection technique (inject-on-write vs inject-on-read). Our results show that these factors affect the error sensitivity in many ways; some factors strongly impact the error sensitivity or SDC count whereas others show a weaker impact. For example, our experiments show that single bit flips tend to cause SDCs more than double bit flips; compiler optimization positively impacts the SDC count but not necessarily the error sensitivity; the error sensitivity varies between 20% and 50% among the programs we tested; and variations in input affect the error sensitivity significantly for most of the tested programs

Self-Adaptation for Availability in CPU-FPGA Systems Under Soft Errors

We introduce a model-based reliability estimation to preserve application availability in CPU-FPGA systems exposed to soft errors under varying environment conditions. The estimation is used as an in-system method to select a suitable configuration for changing radiation conditions. This allows systems to autonomously adapt their configuration in order to balance between reliability and performance. Such a self-adaptation goes beyond the state-of-the-art, where adaptation relies on preplanned reactive mode changes. By autonomously evaluating new configurations, our self-adaptation process is capable of increasing the availability by selecting the configuration with the desired application reliabilities for the current environment conditions

Reliability-aware and energy-efficient system level design for networks-on-chip

2015 Spring.Includes bibliographical references.With CMOS technology aggressively scaling into the ultra-deep sub-micron (UDSM) regime and application complexity growing rapidly in recent years, processors today are being driven to integrate multiple cores on a chip. Such chip multiprocessor (CMP) architectures offer unprecedented levels of computing performance for highly parallel emerging applications in the era of digital convergence. However, a major challenge facing the designers of these emerging multicore architectures is the increased likelihood of failure due to the rise in transient, permanent, and intermittent faults caused by a variety of factors that are becoming more and more prevalent with technology scaling. On-chip interconnect architectures are particularly susceptible to faults that can corrupt transmitted data or prevent it from reaching its destination. Reliability concerns in UDSM nodes have in part contributed to the shift from traditional bus-based communication fabrics to network-on-chip (NoC) architectures that provide better scalability, performance, and utilization than buses. In this thesis, to overcome potential faults in NoCs, my research began by exploring fault-tolerant routing algorithms. Under the constraint of deadlock freedom, we make use of the inherent redundancy in NoCs due to multiple paths between packet sources and sinks and propose different fault-tolerant routing schemes to achieve much better fault tolerance capabilities than possible with traditional routing schemes. The proposed schemes also use replication opportunistically to optimize the balance between energy overhead and arrival rate. As 3D integrated circuit (3D-IC) technology with wafer-to-wafer bonding has been recently proposed as a promising candidate for future CMPs, we also propose a fault-tolerant routing scheme for 3D NoCs which outperforms the existing popular routing schemes in terms of energy consumption, performance and reliability. To quantify reliability and provide different levels of intelligent protection, for the first time, we propose the network vulnerability factor (NVF) metric to characterize the vulnerability of NoC components to faults. NVF determines the probabilities that faults in NoC components manifest as errors in the final program output of the CMP system. With NVF aware partial protection for NoC components, almost 50% energy cost can be saved compared to the traditional approach of comprehensively protecting all NoC components. Lastly, we focus on the problem of fault-tolerant NoC design, that involves many NP-hard sub-problems such as core mapping, fault-tolerant routing, and fault-tolerant router configuration. We propose a novel design-time (RESYN) and a hybrid design and runtime (HEFT) synthesis framework to trade-off energy consumption and reliability in the NoC fabric at the system level for CMPs. Together, our research in fault-tolerant NoC routing, reliability modeling, and reliability aware NoC synthesis substantially enhances NoC reliability and energy-efficiency beyond what is possible with traditional approaches and state-of-the-art strategies from prior work