Practical Evaluation of a Novel Multivariable Relay Autotuner with Short and Efficient Excitation

In this paper we propose an autotuning method that combines a setup for decentralized relay autotuning of two-input two-output systems with an identification method that uses short experiments to estimate up to second-ordertime-delayed systems. A small modification of the experiment gives better low-frequency excitation and improved models. The method is successfully demonstrated in simulations and on a quadruple tank process

A single-step identification strategy for the coupled TITO process using fractional calculus

The reliable performance of a complete control system depends on accurate model information being used to represent each subsystem. The identification and modelling of multivariable systems are complex and challenging due to cross-coupling. Such a system may require multiple steps and decentralized testing to obtain full system models effectively. In this paper, a direct identification strategy is proposed for the coupled two-input two-output (TITO) system with measurable input–output signals. A well-known closed-loop relay test is utilized to generate a set of inputs–outputs data from a single run. Based on the collected data, four individual fractional-order transfer functions, two for main paths and two for cross-paths, are estimated from single-run test signals. The orthogonal series-based algebraic approach is adopted, namely the Haar wavelet operational matrix, to handle the fractional derivatives of the signal in a simple manner. A single-step strategy yields faster identification with accurate estimation. The simulation and experimental studies depict the efficiency and applicability of the proposed identification technique. The demonstrated results on the twin rotor multiple-input multiple- output (MIMO) system (TRMS) clearly reveal that the presented idea works well with the highly coupled system even in the presence of measurement noise

Relay Feedback and Multivariable Control

This doctoral thesis treats three issues in control engineering related to relay feedback and multivariable control systems. Linear systems with relay feedback is the first topic. Such systems are shown to exhibit several interesting behaviors. It is proved that there exist multiple fast relay switches if and only if the sign of the first non-vanishing Markov parameter of the linear system is positive. It is also shown that these fast switches can appear as part of a stable limit cycle. A linear system with pole excess one or two is demonstrated to be particularly interesting. Stability conditions for these cases are derived. It is also discussed how fast relay switches can be approximated by sliding modes. Performance limitations in linear multivariable control systems is the second topic. It is proved that if the top left submatrices of a stable transfer matrix have no right half-plane zeros and a certain high-frequency condition holds, then there exists a diagonal stabilizing feedback that makes a weighted sensitivity function arbitrarily small. Implications on control structure design and sequential loop-closure are given. A novel multivariable laboratory process is also presented. Its linearized dynamics have a transmission zero that can be located anywhere on the real axis by simply adjusting two valves. This process is well suited to illustrate many issues in multivariable control, for example, control design limitations due to right half-plane zeros. The third topic is a combination of relay feedback and multivariable control. Tuning of individual loops in an existing multivariable control system is discussed. It is shown that a specific relay feedback experiment can be used to obtain process information suitable for performance improvement in a loop, without any prior knowledge of the system dynamics. The influence of the loop retuning on the overall closed-loop performance is derived and interpreted in several ways

Evolutionary learning and global search for multi-optimal PID tuning rules

With the advances in microprocessor technology, control systems are widely seen not only in industry but now also in household appliances and consumer electronics. Among all control schemes developed so far, Proportional plus Integral plus Derivative (PID) control is the most widely adopted in practice. Today, more than 90% of industrial controllers have a built-in PID function. Their wide applications have stimulated and sustained the research and development of PID tuning techniques, patents, software packages and hardware modules. Due to parameter interaction and format variation, tuning a PID controller is not as straightforward as one would have anticipated. Therefore, designing speedy tuning rules should greatly reduce the burden on new installation and ‘time-to-market’ and should also enhance the competitive advantages of the PID system under offer. A multi-objective evolutionary algorithm (MOEA) would be an ideal candidate to conduct the learning and search for multi-objective PID tuning rules. A simple to implement MOEA, termed s-MOEA, is devised and compared with MOEAs developed elsewhere. Extensive study and analysis are performed on metrics for evaluating MOEA performance, so as to help with this comparison and development. As a result, a novel visualisation technique, termed “Distance and Distribution” (DD)” chart, is developed to overcome some of the limitations of existing metrics and visualisation techniques. The DD chart allows a user to view the comparison of multiple sets of high order non-dominated solutions in a two-dimensional space. The capability of DD chart is shown in the comparison process and it is shown to be a useful tool for gathering more in-depth information of an MOEA which is not possible in existing empirical studies. Truly multi-objective global PID tuning rules are then evolved as a result of interfacing the s-MOEA with closed-loop simulations under practical constraints. It takes into account multiple, and often conflicting, objectives such as steady-state accuracy and transient responsiveness against stability and overshoots, as well as tracking performance against load disturbance rejection. These evolved rules are compared against other tuning rules both offline on a set of well-recognised PID benchmark test systems and online on three laboratory systems of different dynamics and transport delays. The results show that the rules significantly outperform all existing tuning rules, with multi-criterion optimality. This is made possible as the evolved rules can cover a delay to time constant ratio from zero to infinity based on first-order plus delay plant models. For second-order plus delay plant models, they can also cover all possible dynamics found in practice

The estimation and compensation of processes with time delays

The estimation and compensation of processes with time delays have been of interest to academics and practitioners for several decades. A full review of the literature for both model parameter and time delay estimation is presented. Gradient methods of parameter estimation, in open loop, in the time and frequency domains are subsequently considered in detail. Firstly, an algorithm is developed, using an appropriate gradient algorithm, for the estimation of all the parameters of an appropriate process model with time delay, in open loop, in the time domain. The convergence of the model parameters to the process parameters is considered analytically and in simulation. The estimation of the process parameters in the frequency domain is also addressed, with analytical procedures being defined to provide initial estimates of the model parameters, and a gradient algorithm being used to refine these estimates to attain the global minimum of the cost function that is optimised. The focus of the thesis is subsequently broadened with the consideration of compensation methods for processes with time delays. These methods are reviewed in a comprehensive manner, and the design of a modified Smith predictor, which facilitates a better regulator response than does the Smith predictor, is considered in detail. Gradient algorithms are subsequently developed for the estimation of process parameters (including time delay) in closed loop, in the Smith predictor and modified Smith predictor structures, in the time domain; the convergence of the model parameters to the process parameters is considered analytically and in simulation. The thesis concludes with an overview of the methods developed, and projections regarding future developments in the topics under consideration

Design and Certification of Industrial Predictive Controllers

Three decades have passed since milestone publications by several industrial and academic researchers spawned a flurry of research and commercial, industrial activities on model predictive control (MPC). The improvement in efficiency of the on-line optimization part of MPC led to its adoption in mechanical and mechatronic systems from process control and petrochemical applications. However, the massive strides made by the academic community in guaranteeing stability through state-space MPC have not always been directly applicable in an industrial setting. This thesis is concerned with design and a posteriori certification of feasibility/stability of input-output MPC controllers for industrial applications without terminal conditions (i.e. terminal penalty, terminal constraint, terminal control). MPC controllers which differ in their modelling and prediction method are categorized into three major groups, and a general equivalence between these forms is established. Then an overview on robust set invariance is given as it plays a fundamental role in our analysis of the constrained control systems. These tools are used to give new tuning guidelines as well as a posteriori tests for guaranteeing feasibility of the suboptimal or optimal predictive control law without terminal conditions, which is fundamental towards stability of the closed loop. Next, penalty adaptation is used as a systematic procedure to derive asymptotic stability without any terminal conditions and without using set invariance or Lyapunov arguments. This analysis however is restricted to repetitive systems with input constraints. Then, predictive control without terminal conditions is considered for nonlinear and distributed systems. The invariance tools are extended to switching nonlinear systems, a proof of convergence is given for the iterative nonlinear MPC (NMPC), and a guarantee on overall cost decrease is developed for distributed NMPC, all without terminal conditions. Reference generation and parameter adaptation are shown to be effective mechanisms for NMPC and distributed NMPC (DNMPC) under changing environmental conditions. This is demonstrated on two benchmark test-cases i.e. the wet-clutch and hydrostatic drivetrain, respectively. Terminal conditions in essence are difficult to compute, may compromise performance and are not used in the industry. The main contribution of the thesis is a systematic development and analysis of MPC without terminal conditions for linear, nonlinear and distributed systems.This work was supported within the framework of the LeCoPro project (grant nr. 80032) of the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen)

Engineering Education and Research Using MATLAB

MATLAB is a software package used primarily in the field of engineering for signal processing, numerical data analysis, modeling, programming, simulation, and computer graphic visualization. In the last few years, it has become widely accepted as an efficient tool, and, therefore, its use has significantly increased in scientific communities and academic institutions. This book consists of 20 chapters presenting research works using MATLAB tools. Chapters include techniques for programming and developing Graphical User Interfaces (GUIs), dynamic systems, electric machines, signal and image processing, power electronics, mixed signal circuits, genetic programming, digital watermarking, control systems, time-series regression modeling, and artificial neural networks