10,919 research outputs found
Dynamic Energy Management for Chip Multi-processors under Performance Constraints
We introduce a novel algorithm for dynamic energy management (DEM) under performance constraints in chip multi-processors (CMPs). Using the novel concept of delayed instructions count, performance loss estimations are calculated at the end of each control period for each core. In addition, a Kalman filtering based approach is employed to predict workload in the next control period for which voltage-frequency pairs must be selected. This selection is done with a novel dynamic voltage and frequency scaling (DVFS) algorithm whose objective is to reduce energy consumption but without degrading performance beyond the user set threshold. Using our customized Sniper based CMP system simulation framework, we demonstrate the effectiveness of the proposed algorithm for a variety of benchmarks for 16 core and 64 core network-on-chip based CMP architectures. Simulation results show consistent energy savings across the board. We present our work as an investigation of the tradeoff between the achievable energy reduction via DVFS when predictions are done using the effective Kalman filter for different performance penalty thresholds
A Survey of Prediction and Classification Techniques in Multicore Processor Systems
In multicore processor systems, being able to accurately predict the future provides new optimization opportunities, which otherwise could not be exploited. For example, an oracle able to predict a certain application\u27s behavior running on a smart phone could direct the power manager to switch to appropriate dynamic voltage and frequency scaling modes that would guarantee minimum levels of desired performance while saving energy consumption and thereby prolonging battery life. Using predictions enables systems to become proactive rather than continue to operate in a reactive manner. This prediction-based proactive approach has become increasingly popular in the design and optimization of integrated circuits and of multicore processor systems. Prediction transforms from simple forecasting to sophisticated machine learning based prediction and classification that learns from existing data, employs data mining, and predicts future behavior. This can be exploited by novel optimization techniques that can span across all layers of the computing stack. In this survey paper, we present a discussion of the most popular techniques on prediction and classification in the general context of computing systems with emphasis on multicore processors. The paper is far from comprehensive, but, it will help the reader interested in employing prediction in optimization of multicore processor systems
Recommended from our members
On thermal sensor calibration and software techniques for many-core thermal management
The high power density of a many-core processor results in increased temperature which negatively impacts system reliability and performance. Dynamic thermal management applies thermal-aware techniques at run time to avoid overheating using temperature information collected from on-chip thermal sensors. Temperature sensing and thermal control schemes are two critical technologies for successfully maintaining thermal safety. In this dissertation, on-line thermal sensor calibration schemes are developed to provide accurate temperature information.
Software-based dynamic thermal management techniques are proposed using calibrated thermal sensors. Due to process variation and silicon aging, on-chip thermal sensors require periodic calibration before use in DTM. However, the calibration cost for thermal sensors can be prohibitively high as the number of on-chip sensors increases. Linear models which are suitable for on-line calculation are employed to estimate temperatures at multiple sensor locations using performance counters. The estimated temperature and the actual sensor thermal profile show a very high similarity with correlation coefficient ~0.9 for SPLASH2 and SPEC2000 benchmarks.
A calibration approach is proposed to combine potentially inaccurate temperature values obtained from two sources: thermal sensor readings and temperature estimations. A data fusion strategy based on Bayesian inference, which combines information from these two sources, is demonstrated. The result shows the strategy can effectively recalibrate sensor readings in response to inaccuracies caused by process variation and environmental noise. The average absolute error of the corrected sensor temperature readings is
A dynamic task allocation strategy is proposed to address localized overheating in many-core systems. Our approach employs reinforcement learning, a dynamic machine learning algorithm that performs task allocation based on current temperatures and a prediction regarding which assignment will minimize the peak temperature. Our results show that the proposed technique is fast (scheduling performed in \u3c1 \u3ems) and can efficiently reduce peak temperature by up to 8 degree C in a 49-core processor (6% on average) versus a leading competing task allocation approach for a series of SPLASH-2 benchmarks. Reinforcement learning has also been applied to 3D integrated circuits to allocate tasks with thermal awareness
Physical parameter-aware Networks-on-Chip design
PhD ThesisNetworks-on-Chip (NoCs) have been proposed as a scalable, reliable
and power-efficient communication fabric for chip multiprocessors
(CMPs) and multiprocessor systems-on-chip (MPSoCs). NoCs determine
both the performance and the reliability of such systems, with a
significant power demand that is expected to increase due to developments
in both technology and architecture. In terms of architecture, an
important trend in many-core systems architecture is to increase the
number of cores on a chip while reducing their individual complexity.
This trend increases communication power relative to computation
power. Moreover, technology-wise, power-hungry wires are dominating
logic as power consumers as technology scales down. For these
reasons, the design of future very large scale integration (VLSI) systems
is moving from being computation-centric to communication-centric.
On the other hand, chip’s physical parameters integrity, especially
power and thermal integrity, is crucial for reliable VLSI systems. However,
guaranteeing this integrity is becoming increasingly difficult with
the higher scale of integration due to increased power density and operating
frequencies that result in continuously increasing temperature
and voltage drops in the chip. This is a challenge that may prevent
further shrinking of devices. Thus, tackling the challenge of power
and thermal integrity of future many-core systems at only one level
of abstraction, the chip and package design for example, is no longer
sufficient to ensure the integrity of physical parameters. New designtime
and run-time strategies may need to work together at different
levels of abstraction, such as package, application, network, to provide
the required physical parameter integrity for these large systems. This
necessitates strategies that work at the level of the on-chip network
with its rising power budget.
This thesis proposes models, techniques and architectures to improve
power and thermal integrity of Network-on-Chip (NoC)-based
many-core systems. The thesis is composed of two major parts: i)
minimization and modelling of power supply variations to improve
power integrity; and ii) dynamic thermal adaptation to improve thermal
integrity. This thesis makes four major contributions. The first is
a computational model of on-chip power supply variations in NoCs.
The proposed model embeds a power delivery model, an NoC activity
simulator and a power model. The model is verified with SPICE simulation
and employed to analyse power supply variations in synthetic
and real NoC workloads. Novel observations regarding power supply
noise correlation with different traffic patterns and routing algorithms
are found. The second is a new application mapping strategy aiming
vii
to minimize power supply noise in NoCs. This is achieved by defining
a new metric, switching activity density, and employing a force-based
objective function that results in minimizing switching density. Significant
reductions in power supply noise (PSN) are achieved with a low
energy penalty. This reduction in PSN also results in a better link timing
accuracy. The third contribution is a new dynamic thermal-adaptive
routing strategy to effectively diffuse heat from the NoC-based threedimensional
(3D) CMPs, using a dynamic programming (DP)-based distributed
control architecture. Moreover, a new approach for efficient extension
of two-dimensional (2D) partially-adaptive routing algorithms
to 3D is presented. This approach improves three-dimensional networkon-
chip (3D NoC) routing adaptivity while ensuring deadlock-freeness.
Finally, the proposed thermal-adaptive routing is implemented in
field-programmable gate array (FPGA), and implementation challenges,
for both thermal sensing and the dynamic control architecture are addressed.
The proposed routing implementation is evaluated in terms
of both functionality and performance.
The methodologies and architectures proposed in this thesis open a
new direction for improving the power and thermal integrity of future
NoC-based 2D and 3D many-core architectures
DeepPicar: A Low-cost Deep Neural Network-based Autonomous Car
We present DeepPicar, a low-cost deep neural network based autonomous car
platform. DeepPicar is a small scale replication of a real self-driving car
called DAVE-2 by NVIDIA. DAVE-2 uses a deep convolutional neural network (CNN),
which takes images from a front-facing camera as input and produces car
steering angles as output. DeepPicar uses the same network architecture---9
layers, 27 million connections and 250K parameters---and can drive itself in
real-time using a web camera and a Raspberry Pi 3 quad-core platform. Using
DeepPicar, we analyze the Pi 3's computing capabilities to support end-to-end
deep learning based real-time control of autonomous vehicles. We also
systematically compare other contemporary embedded computing platforms using
the DeepPicar's CNN-based real-time control workload. We find that all tested
platforms, including the Pi 3, are capable of supporting the CNN-based
real-time control, from 20 Hz up to 100 Hz, depending on hardware platform.
However, we find that shared resource contention remains an important issue
that must be considered in applying CNN models on shared memory based embedded
computing platforms; we observe up to 11.6X execution time increase in the CNN
based control loop due to shared resource contention. To protect the CNN
workload, we also evaluate state-of-the-art cache partitioning and memory
bandwidth throttling techniques on the Pi 3. We find that cache partitioning is
ineffective, while memory bandwidth throttling is an effective solution.Comment: To be published as a conference paper at RTCSA 201
Recommended from our members
Characterization of voltage noise in big, small and single-ISA heterogeneous systems
Sensitivity of the microprocessor to voltage fluctuations is becoming a major concern with growing emphasis on designing power-efficient microprocessors. Voltage fluctuations that exceed a certain threshold cause "emergencies" that can lead to timing errors in the processor, thus risking reliability. To guarantee correctness under such conditions, large voltage guardbands are employed, at the cost of reduced performance and wastage of power. Trends in microprocessor technology indicate that worst-case operating voltage margins are not sustainable. Since voltage emergencies occur only infrequently, resilient architectures with aggressive guardbands are needed. However, to enable the exploration of the design space of resilient processors, it is important to have a deep understanding of the characteristics of voltage noise in different system configurations. Prior research in this area has mostly focused on systems with very few cores. Given the increasing relevance of large multi-core systems, this thesis presents a detailed characterization of voltage noise on chip multi-processors, consisting of large number of cores. The data indicates that while the worst case voltage droop increases with increase in the number of cores, the frequency of occurrence of the droops is not greatly impacted, emphasizing the feasibility of employing resilient microarchitectures with aggressive voltage margins. The thesis also presents a comparative study of voltage noise in CMPs consisting of either high-performant out-of-order cores and power-efficient in-order cores. The study highlights that the out-of-order cores experience much larger voltage variations when compared to the in-order cores, but offer a clear advantage in terms of performance. Experiments indicate that in-order configurations that offer equivalent performance to the out-of-order cores result in large energy-delay product, indicating the trade-offs involved in designing for performance, power and reliability. The thesis also presents a study of voltage noise in single-ISA heterogeneous configurations, to highlight the benefits of such systems towards lowering the worst-case voltage margins, which improve both performance and power. The experimental results indicate that the worst-case voltage droop in such heterogeneous systems lies in between the out-of-order and in-order cores and provide reasonable power-efficiency and performance. Further, the work highlights the importance of exploring the design-space of heterogeneous systems considering reliability as an important design criteria.Computer Science
Energy Saving and Scavenging in Stand-alone and Large Scale Distributed Systems.
This thesis focuses on energy management techniques for distributed systems such as hand-held mobile devices, sensor nodes, and data center servers. One of the major design problems in multiple application domains is the mismatch between workloads and resources. Sub-optimal assignment of workloads to resources can cause underloaded or overloaded resources, resulting in performance degradation or energy waste. This work specifically focuses on the heterogeneity in system hardware components and workloads. It includes energy management solutions for unregulated or batteryless embedded systems; and data center servers with heterogeneous workloads, machines, and processor wear states.
This thesis describes four major contributions: (1) This thesis describes a battery test and energy delivery system design process to maintain battery life in embedded systems without voltage regulators. (2) In battery-less sensor nodes, this thesis demonstrates a routing protocol to maintain reliable transmission through the sensor network. (3) This thesis has characterized typical workloads and developed two models to capture the heterogeneity of data center tasks and machines: a task performance model and a machine resource utilization model. These models allow users to predict task finish time on individual machines. It then integrates these two models into a task scheduler based on the Hadoop framework for MapReduce tasks, and uses this scheduler for server energy minimization using task concentration. (4) In addition to saving server energy consumption, this thesis describes a method of reducing data center cooling energy by maintaining optimal server processor temperature setpoints through a task assignment algorithm. This algorithm considers the reliability impact of processor wear states. It records processor wear states through automatic timing slack tests on a cluster of machines with varying core temperatures, voltages, and frequencies. These optimal temperature setpoints are used in a task scheduling algorithm that saves both server and cooling energy.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116746/1/xjhe_1.pd
Dependable Embedded Systems
This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems
Learning Scheduling Algorithms for Data Processing Clusters
Efficiently scheduling data processing jobs on distributed compute clusters
requires complex algorithms. Current systems, however, use simple generalized
heuristics and ignore workload characteristics, since developing and tuning a
scheduling policy for each workload is infeasible. In this paper, we show that
modern machine learning techniques can generate highly-efficient policies
automatically. Decima uses reinforcement learning (RL) and neural networks to
learn workload-specific scheduling algorithms without any human instruction
beyond a high-level objective such as minimizing average job completion time.
Off-the-shelf RL techniques, however, cannot handle the complexity and scale of
the scheduling problem. To build Decima, we had to develop new representations
for jobs' dependency graphs, design scalable RL models, and invent RL training
methods for dealing with continuous stochastic job arrivals. Our prototype
integration with Spark on a 25-node cluster shows that Decima improves the
average job completion time over hand-tuned scheduling heuristics by at least
21%, achieving up to 2x improvement during periods of high cluster load
Doctor of Philosophy in Computing
dissertationThe demand for main memory capacity has been increasing for many years and will continue to do so. In the past, Dynamic Random Access Memory (DRAM) process scaling has enabled this increase in memory capacity. Along with continued DRAM scaling, the emergence of new technologies like 3D-stacking, buffered Dual Inline Memory Modules (DIMMs), and crosspoint nonvolatile memory promise to continue this trend in the years ahead. However, these technologies will bring with them their own gamut of problems. In this dissertation, I look at the problems facing these technologies from a current delivery perspective. 3D-stacking increases memory capacity available per package, but the increased current requirement means that more pins on the package have to be now dedicated to provide Vdd/Vss, hence increasing cost. At the system level, using buffered DIMMs to increase the number of DRAM ranks increases the peak current requirements of the system if all the DRAM chips in the system are Refreshed simultaneously. Crosspoint memories promise to greatly increase bit densities but have long read latencies because of sneak currents in the cross-bar. In this dissertation, I provide architectural solutions to each of these problems. We observe that smart data placement by the architecture and the Operating System (OS) is a vital ingredient in all of these solutions. We thereby mitigate major bottlenecks in these technologies, hence enabling higher memory densities
- …