Capacity Analysis of IEEE 802.11ah WLANs for M2M Communications

Focusing on the increasing market of the sensors and actuators networks, the IEEE 802.11ah Task Group is currently working on the standardization of a new amendment. This new amendment will operate at the sub-1GHz band, ensure transmission ranges up to 1 Km, data rates above 100 kbps and very low power operation. With IEEE 802.11ah, the WLANs will offer a solution for applications such as smart metering, plan automation, eHealth or surveillance. Moreover, thanks to a hierarchical signalling, the IEEE 802.11ah will be able to manage a higher number of stations (STAs) and improve the 802.11 Power Saving Mechanisms. In order to support a high number of STAs, two different signalling modes are proposed, TIM and Non-TIM Offset. In this paper we present a theoretical model to predict the maximum number of STAs supported by both modes depending on the traffic load and the data rate used. Moreover, the IEEE 802.11ah performance and energy consumption for both signalling modes and for different traffic patterns and data rates is evaluated. Results show that both modes achieve similar Packet Delivery Ratio values but the energy consumed with the TIM Offset is, in average, a 11.7% lower.Comment: Multiple Access Communications 201

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

Classified Medium Access Control Algorithm (CL-MAC) for Enhanced Operation of IEEE 802.11ah

We present in this apaper a high level framework of a proposed Medium Access Control Algorithm known as Classified Medium Access Control Algorithm for enhanced operation of IEEE 802.11ah.  IEEE 802.11ah is an amendment for the IEEE 802.11 standard known as Wireless Local Area Network (WLAN) or Wi-Fi network standard. This amendment was mainly established to increase the number of Wi-Fi stations managed by the single Access Point. As more and more number of heterogeneous network stations emerge to also utilize this network, some techniques have been employed to ensure better management of the network but this still remains an open issue that needs to be tackled. This paper presents a hybrid TDMA and CSMA/CA scheme for the channel access in lieu of the default Enhanced Distributed Channel Access (EDCA) of the WLAN. When compared with the result of the EDCA, the proposed scheme provided a better throughput performance for the IEEE 802.11ah amendment

Uncoordinated access schemes for the IoT: approaches, regulations, and performance

Internet of Things (IoT) devices communicate using a variety of protocols, differing in many aspects, with the channel access method being one of the most important. Most of the transmission technologies explicitly designed for IoT and Machine-to-Machine (M2M) communication use either an ALOHA-based channel access or some type of Listen Before Talk (LBT) strategy, based on carrier sensing. In this paper, we provide a comparative overview of the uncoordinated channel access methods for IoT technologies, namely ALOHA-based and LBT schemes, in relation with the ETSI and FCC regulatory frameworks. Furthermore, we provide a performance comparison of these access schemes, both in terms of successful transmissions and energy efficiency, in a typical IoT deployment. Results show that LBT is effective in reducing inter-node interference even for long-range transmissions, though the energy efficiency can be lower than that provided by ALOHA methods. The adoption of rate-adaptation schemes, furthermore, lowers the energy consumption while improving the fairness among nodes at different distances from the receiver. Coexistence issues are also investigated, showing that in massive deployments LBT is severely affected by the presence of ALOHA devices in the same area

Energy analysis of contention tree-based access protocols in dense machine-to-machine area networks

Machine-to-Machine (M2M) area networks aim at connecting an M2M gateway with a large number of energy-constrained devices that must operate autonomously for years. Therefore, attaining high energy efficiency is essential in the deployment of M2M networks. In this paper, we consider a dense M2M area network composed of hundreds or thousands of devices that periodically transmit data upon request from a gateway or coordinator. We theoretically analyse the devices’ energy consumption using two Medium Access Control (MAC) protocols which are based on a tree-splitting algorithm to resolve collisions among devices: the Contention Tree Algorithm (CTA) and the Distributed Queuing (DQ) access. We have carried out computer-based simulations to validate the accuracy of the theoretical models and to compare the energy performance using DQ, CTA, and Frame Slotted-ALOHA (FSA) in M2M area networks with devices in compliance with the IEEE 802.15.4 physical layer. Results show that the performance of DQ is totally independent of the number of contending devices, and it can reduce the energy consumed per device in more than 35% with respect to CTA and in more than 80% with respect to FSA.Peer ReviewedPostprint (published version