27,313 research outputs found
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
A Cross-Layer Approach for Minimizing Interference and Latency of Medium Access in Wireless Sensor Networks
In low power wireless sensor networks, MAC protocols usually employ periodic
sleep/wake schedule to reduce idle listening time. Even though this mechanism
is simple and efficient, it results in high end-to-end latency and low
throughput. On the other hand, the previously proposed CSMA/CA-based MAC
protocols have tried to reduce inter-node interference at the cost of increased
latency and lower network capacity. In this paper we propose IAMAC, a CSMA/CA
sleep/wake MAC protocol that minimizes inter-node interference, while also
reduces per-hop delay through cross-layer interactions with the network layer.
Furthermore, we show that IAMAC can be integrated into the SP architecture to
perform its inter-layer interactions. Through simulation, we have extensively
evaluated the performance of IAMAC in terms of different performance metrics.
Simulation results confirm that IAMAC reduces energy consumption per node and
leads to higher network lifetime compared to S-MAC and Adaptive S-MAC, while it
also provides lower latency than S-MAC. Throughout our evaluations we have
considered IAMAC in conjunction with two error recovery methods, i.e., ARQ and
Seda. It is shown that using Seda as the error recovery mechanism of IAMAC
results in higher throughput and lifetime compared to ARQ.Comment: 17 pages, 16 figure
A Comprehensive Survey of Potential Game Approaches to Wireless Networks
Potential games form a class of non-cooperative games where unilateral
improvement dynamics are guaranteed to converge in many practical cases. The
potential game approach has been applied to a wide range of wireless network
problems, particularly to a variety of channel assignment problems. In this
paper, the properties of potential games are introduced, and games in wireless
networks that have been proven to be potential games are comprehensively
discussed.Comment: 44 pages, 6 figures, to appear in IEICE Transactions on
Communications, vol. E98-B, no. 9, Sept. 201
Dynamic Channel Access Scheme for Interference Mitigation in Relay-assisted Intra-WBANs
This work addresses problems related to interference mitigation in a single
wireless body area network (WBAN). In this paper, We propose a distributed
\textit{C}ombined carrier sense multiple access with collision avoidance
(CSMA/CA) with \textit{F}lexible time division multiple access (\textit{T}DMA)
scheme for \textit{I}nterference \textit{M}itigation in relay-assisted
intra-WBAN, namely, CFTIM. In CFTIM scheme, non interfering sources
(transmitters) use CSMA/CA to communicate with relays. Whilst, high interfering
sources and best relays use flexible TDMA to communicate with coordinator (C)
through using stable channels. Simulation results of the proposed scheme are
compared to other schemes and consequently CFTIM scheme outperforms in all
cases. These results prove that the proposed scheme mitigates interference,
extends WBAN energy lifetime and improves the throughput. To further reduce the
interference level, we analytically show that the outage probability can be
effectively reduced to the minimal.Comment: 2015 IEEE International Conference on Protocol Engineering (ICPE) and
International Conference on New Technologies of Distributed Systems (NTDS),
Paris, France. arXiv admin note: text overlap with arXiv:1602.0865
Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks
Future wireless networks have a substantial potential in terms of supporting
a broad range of complex compelling applications both in military and civilian
fields, where the users are able to enjoy high-rate, low-latency, low-cost and
reliable information services. Achieving this ambitious goal requires new radio
techniques for adaptive learning and intelligent decision making because of the
complex heterogeneous nature of the network structures and wireless services.
Machine learning (ML) algorithms have great success in supporting big data
analytics, efficient parameter estimation and interactive decision making.
Hence, in this article, we review the thirty-year history of ML by elaborating
on supervised learning, unsupervised learning, reinforcement learning and deep
learning. Furthermore, we investigate their employment in the compelling
applications of wireless networks, including heterogeneous networks (HetNets),
cognitive radios (CR), Internet of things (IoT), machine to machine networks
(M2M), and so on. This article aims for assisting the readers in clarifying the
motivation and methodology of the various ML algorithms, so as to invoke them
for hitherto unexplored services as well as scenarios of future wireless
networks.Comment: 46 pages, 22 fig
Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?
The adoption of Software Defined Networking (SDN) within traditional networks
has provided operators the ability to manage diverse resources and easily
reconfigure networks as requirements change. Recent research has extended this
concept to IEEE 802.15.4 low-power wireless networks, which form a key
component of the Internet of Things (IoT). However, the multiple traffic
patterns necessary for SDN control makes it difficult to apply this approach to
these highly challenging environments. This paper presents Atomic-SDN, a highly
reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN
introduces a novel Synchronous Flooding (SF) architecture capable of
dynamically configuring SF protocols to satisfy complex SDN control
requirements, and draws from the authors' previous experiences in the IEEE EWSN
Dependability Competition: where SF solutions have consistently outperformed
other entries. Using this approach, Atomic-SDN presents considerable
performance gains over other SDN implementations for low-power IoT networks. We
evaluate Atomic-SDN through simulation and experimentation, and show how
utilizing SF techniques provides latency and reliability guarantees to SDN
control operations as the local mesh scales. We compare Atomic-SDN against
other SDN implementations based on the IEEE 802.15.4 network stack, and
establish that Atomic-SDN improves SDN control by orders-of-magnitude across
latency, reliability, and energy-efficiency metrics
- …