Close-Range Photogrammetric Measurement of Static Deflections for an Aeroelastic Supercritical Wing

Close range photogrammetric measurements were made for the lower wing surface of a full span aspect ratio 10.3 aeroelastic supercritical research wing. The measurements were made during wind tunnel tests for quasi-steady pressure distributions on the wing. The tests were conducted in the NASA Langley Transonic Dynamics Tunnel at Mach numbers up to 0.90 and dynamic pressures up to 300 pounds per square foot. Deflection data were obtained for 57 locations on the wing lower surface using dual non-metric cameras. Representative data are presented as graphical overview to show variations and trends of spar deflection with test variables. Comparative data are presented for photogrammetric and cathetometric results of measurements for the wing tip deflections. A tabulation of the basic measurements is presented in a supplement to this report

Study of optical techniques for the Ames unitary wind tunnels. Part 4: Model deformation

A survey of systems capable of model deformation measurements was conducted. The survey included stereo-cameras, scanners, and digitizers. Moire, holographic, and heterodyne interferometry techniques were also looked at. Stereo-cameras with passive or active targets are currently being deployed for model deformation measurements at NASA Ames and LaRC, Boeing, and ONERA. Scanners and digitizers are widely used in robotics, motion analysis, medicine, etc., and some of the scanner and digitizers can meet the model deformation requirements. Commercial stereo-cameras, scanners, and digitizers are being improved in accuracy, reliability, and ease of operation. A number of new systems are coming onto the market

Mariner Mars 1971 optical navigation demonstration

The feasibility of using a combination of spacecraft-based optical data and earth-based Doppler data to perform near-real-time approach navigation was demonstrated by the Mariner Mars 71 Project. The important findings, conclusions, and recommendations are documented. A summary along with publications and papers giving additional details on the objectives of the demonstration are provided. Instrument calibration and performance as well as navigation and science results are reported

Vision-based methods for relative sag measurement of suspension bridge cables

Main cables, comprising a number of wire strands, constitute a vital element in long-span suspension bridges. The determination of their alignment during construction is of great importance, and relative sag is commonly measured for the efficient sag adjustment of general strands. The conventional approach uses the caterpillar method, which is inconvenient, difficult-to-implement, and potentially dangerous. In order to realize the high-precision measurement of cable alignment in a strong wind environment, a vision-based method for relative sag measurement of the general cable strands is proposed in this paper. In the proposed measurement system, images of pre-installed optical targets are collected and analyzed to realize the remote, automatic, and real-time measurement of the relative sag. The influences of wind-induced cable shaking and camera shaking on the accuracy of the height difference measurement are also theoretically analyzed. The results show that cable strand torsion and camera roll have a great impact on the measurement accuracy, while the impacts of the cable strand swing and vibration, camera swing and vibration, and camera pitch and yaw are insignificant. The vision-based measurement system tested in the field experiment also shows a measurement error within 3 mm, which meets the requirements for cable adjustment construction. At the same time, the vision-based measurement method proposed and validated in this paper can improve the measurement accuracy and efficiency of strand alignment in a strong wind environment. Potential risks involved in the manual measurement, e.g., working at heights and in strong wind environments, can be eliminated, facilitating the automation of the cable erection process

Precision pointing compensation for DSN antennas with optical distance measuring sensors

The pointing control loops of Deep Space Network (DSN) antennas do not account for unmodeled deflections of the primary and secondary reflectors. As a result, structural distortions due to unpredictable environmental loads can result in uncompensated boresight shifts which degrade pointing accuracy. The design proposed here can provide real-time bias commands to the pointing control system to compensate for environmental effects on pointing performance. The bias commands can be computed in real time from optically measured deflections at a number of points on the primary and secondary reflectors. Computer simulations with a reduced-order finite-element model of a DSN antenna validate the concept and lead to a proposed design by which a ten-to-one reduction in pointing uncertainty can be achieved under nominal uncertainty conditions

Wind turbine rotor blade monitoring using digital image correlation: a comparison to aeroelastic simulations of a multi-megawatt wind turbine

Optical full-field measurement methods such as Digital Image Correlation (DIC) provide a new opportunity for measuring deformations and vibrations with high spatial and temporal resolution. However, application to full-scale wind turbines is not trivial. Elaborate preparation of the experiment is vital and sophisticated post processing of the DIC results essential. In the present study, a rotor blade of a 3.2 MW wind turbine is equipped with a random black-and-white dot pattern at four different radial positions. Two cameras are located in front of the wind turbine and the response of the rotor blade is monitored using DIC for different turbine operations. In addition, a Light Detection and Ranging (LiDAR) system is used in order to measure the wind conditions. Wind fields are created based on the LiDAR measurements and used to perform aeroelastic simulations of the wind turbine by means of advanced multibody codes. The results from the optical DIC system appear plausible when checked against common and expected results. In addition, the comparison of relative out-of-plane blade deflections shows good agreement between DIC results and aeroelastic simulations.Ministry of Science and Culture of Lower Saxon