Two-level pipelined systolic array graphics engine

The authors report a VLSI design of an advanced systolic array graphics (SAG) engine built from pipelined functional units which can generate realistic images interactively for high-resolution displays. They introduce a structured frame store system as an environment for the advanced SAG engine and present the principles and architecture of the advanced SAG engine. They introduce pipelined functional units into this SAG engine to meet the performance requirements. This is done by a formal approach where the original systolic array is represented at bit level by a finite, vertex-weighted, edge-weighted, directed graph. Two architectures built from pipelined functional units are described. A prototype containing nine processing elements was fabricated in a 1.6-¿m CMOS technolog

VIPER : a 25-MHz, 100-MIPS peak VLIW micro-processor

This paper describes the design and implementation of a very long instruction word (VLIW) microprocessor. The VIPER (VLIW integer processor) contains four pipelined functional units, and can achieve 100 MIPS peak performance at 25 MHz. The procesor is capable of performing multiway branch operations, two load/store operations and up to four ALU operations in each clock cycle, with full register file access to each functional unit. VIPER is the first VLIW microprocessor known that can achieve this level of performance. Designed in twelve months, the processor is integrated with an instruction cache controller and a data cache, requiring 450,000 transistors and a die size of 12.9 by 9.1 mm in a 1.2 µm technology

Asynchronous techniques for system-on-chip design

SoC design will require asynchronous techniques as the large parameter variations across the chip will make it impossible to control delays in clock networks and other global signals efficiently. Initially, SoCs will be globally asynchronous and locally synchronous (GALS). But the complexity of the numerous asynchronous/synchronous interfaces required in a GALS will eventually lead to entirely asynchronous solutions. This paper introduces the main design principles, methods, and building blocks for asynchronous VLSI systems, with an emphasis on communication and synchronization. Asynchronous circuits with the only delay assumption of isochronic forks are called quasi-delay-insensitive (QDI). QDI is used in the paper as the basis for asynchronous logic. The paper discusses asynchronous handshake protocols for communication and the notion of validity/neutrality tests, and completion tree. Basic building blocks for sequencing, storage, function evaluation, and buses are described, and two alternative methods for the implementation of an arbitrary computation are explained. Issues of arbitration, and synchronization play an important role in complex distributed systems and especially in GALS. The two main asynchronous/synchronous interfaces needed in GALS-one based on synchronizer, the other on stoppable clock-are described and analyzed

On-Line Instruction-checking in Pipelined Microprocessors

Microprocessors performances have increased by more than five orders of magnitude in the last three decades. As technology scales down, these components become inherently unreliable posing major design and test challenges. This paper proposes an instruction-checking architecture to detect erroneous instruction executions caused by both permanent and transient errors in the internal logic of a microprocessor. Monitoring the correct activation sequence of a set of predefined microprocessor control/status signals allow distinguishing between correctly and not correctly executed instruction

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

A case study for NoC based homogeneous MPSoC architectures

The many-core design paradigm requires flexible and modular hardware and software components to provide the required scalability to next-generation on-chip multiprocessor architectures. A multidisciplinary approach is necessary to consider all the interactions between the different components of the design. In this paper, a complete design methodology that tackles at once the aspects of system level modeling, hardware architecture, and programming model has been successfully used for the implementation of a multiprocessor network-on-chip (NoC)-based system, the NoCRay graphic accelerator. The design, based on 16 processors, after prototyping with field-programmable gate array (FPGA), has been laid out in 90-nm technology. Post-layout results show very low power, area, as well as 500 MHz of clock frequency. Results show that an array of small and simple processors outperform a single high-end general purpose processo

Design of a high-speed digital processing element for parallel simulation

A prototype of a custom designed computer to be used as a processing element in a multiprocessor based jet engine simulator is described. The purpose of the custom design was to give the computer the speed and versatility required to simulate a jet engine in real time. Real time simulations are needed for closed loop testing of digital electronic engine controls. The prototype computer has a microcycle time of 133 nanoseconds. This speed was achieved by: prefetching the next instruction while the current one is executing, transporting data using high speed data busses, and using state of the art components such as a very large scale integration (VLSI) multiplier. Included are discussions of processing element requirements, design philosophy, the architecture of the custom designed processing element, the comprehensive instruction set, the diagnostic support software, and the development status of the custom design