Co-doping red-emitting Sr2Si5N8:Eu2+ into yellow-emitting phosphor-packaging for enhancing the optical properties of the 8500 K remote-phosphor packaging wleds

In the last decades, WLEDs attract more and more consideration in both academic and industrial purposes because of its advantages such as fast response time, environment friendliness, small size, long lifetime, and high efficiency. In this research, by doping the red-emitting Sr2Si5N8:Eu2+ phosphor particles into yellow-emitting YAG:Ce phosphor-packaging, a new recommendation for enhancing the optical properties (color uniformity, color rendering index, and lumen output) of the 8500 K remote-phosphor packaging WLEDs is presented, investigated, and demonstrated. By using Mat Lab and Light Tools software based on Mie Theory, the obtained results show that the optical properties of the 8500 K remote-phosphor packaging WLEDs significantly depended on Sr2Si5N8:Eu2+ concentration. The results have provided a potential practical recommendation for manufacturing remote-phosphor W-LEDs.Web of Science1341034102

Effect of selected luminescent layers on CCT, CRI, and response times

Phosphors have been used as wavelength converters in illumination for many years. When it is excited with blue light, the frequently used yttrium aluminium garnet doped with cerium (YAG:Ce) phosphor converts a part of blue light to a wideband yellow light, resulting in the generated light having a white color. By combining an appropriate concentration of the YAG:Ce phosphor and blue excitant light, white light of a desired correlated color temperature (CCT) can be obtained. However, this type of illumination has a lower color rendering index value (CRI). In an attempt to improve the CRI value, we mixed the YAG:Ce phosphor with europium-doped calcium sulfide phosphor (CaS:Eu), which resulted in a considerably increased CRI value. This article examines an experiment with luminescent layers consisting of a mixture of selected phosphors and polydimethylsiloxane (PDMS). Different thicknesses in these layers were achieved by changing the speed of rotation during their accumulation onto laboratory glass using the method of spin coating. The spectral characteristics of these luminescent layers as they were excited with blue light emitting diode (LED) and laser diode (LD) were then determined. A suitable combination of the YAG:Ce phosphor with a phosphor containing europium, as it was excited with a blue LED, yielded a source of white light with a CRI value of greater than 85. The response time in the tested luminescent layers to a rectangular excitant impulse (generated by a signal generator and transmitted by LD) was also measured in order to examine their potential use in visible light communications (VLC).Web of Science1213art. no. 209

Red-emitting Ba2Si5N8Eu2+ conversion phosphor: A new selection for enhancing the optical performance of the in-cup packaging MCW-LEDs

In this research, the influence of the red-emitting Ba2Si5N8Eu2+ convention phosphor on the optical performance of the 7,000K and 7,700K in-cup packaging multi-chip white LEDs (MCW-LEDs) is investigated. The effect of the red-emitting Ba2Si5N8Eu2+ convention phosphor is demonstrated based on Mie Theory by Mat Lab and Light Tools software. The research results indicated that the optical performance of MCW-LEDs was crucially affected by the red-emitting Ba2Si5N8Eu2+ phosphor's concentration. This paper provides an essential recommendation for selecting and developing the phosphor materials for MW-LEDs manufacturing.Web of Science51art. no. 148615

Validation of phosphor thermometry for industrial surface temperature measurements

Surface temperature measurements are required by the aerospace and automotive industries to guarantee high-quality products and optimize production processes. Accurate and reliable measurement of surface temperature is very challenging in an industrial environment. Surface contact probes are widely used but poorly characterized, while non-contact infrared thermometry is severely hampered by the unknown emissivity of the surface and by problems caused by stray radiation from the background. An alternative approach to the above techniques is phosphor thermometry, used here in a hybrid contact/non-contact approach. In this work, the development of a lifetime-based phosphor thermometer, its application to industrial surface temperature measurement and its validation are reported in a metrologically sound manner. The phosphor thermometer was initially calibrated by contact on a reference calibrator system at the Istituto Nazionale di Ricerca Metrologica to provide SI traceability to the measurements at the industrial level; the system was later validated by exploiting a metal phase-change method. The robustness of the approach against a strong radiative background was also investigated. A comprehensive uncertainty analysis was carried out, resulting in an expanded uncertainty (k  =  2) lower than 1.4 °C over the temperature range from the ambient to 450 °C. The phosphor-based thermometer was then tested at industrial manufacturing premises to measure the surface temperature of aluminium alloy billets during the pre-heating phase before forging. The phosphor-based approach was compared with radiation and contact thermometry in both static and dynamic measurement conditions. The experimental results proved that phosphor thermometry, besides being a valid alternative to conventional techniques, may offer better performance in an industrial setting

A relative-intensity two-color phosphor thermography system

The NASA LaRC has developed a relative-intensity two-color phosphor thermography system. This system has become a standard technique for acquiring aerothermodynamic data in LaRC Hypersonic Facilities Complex (HFC). The relative intensity theory and its application to the LaRC phosphor thermography system is discussed along with the investment casting technique which is critical to the utilization of the phosphor method for aerothermodynamic studies. Various approaches to obtaining quantitative heat transfer data using thermographic phosphors are addressed and comparisons between thin-film data and thermographic phosphor data on an orbiter-like configuration are presented. In general, data from these two techniques are in good agreement. A discussion is given on the application of phosphors to integration heat transfer data reduction techniques (the thin film method) and preliminary heat transfer data obtained on a calibration sphere using thin-film equations are presented. Finally, plans for a new phosphor system which uses target recognition software are discussed

Low Temperature Precursor Route for Highly Efficient Spherically Shaped LED-Phosphors M2Si5N8:Eu2+ (M = Eu, Sr, Ba)

The highly efficient nitridosilicate phosphors M2Si5N8 (M = Sr, Ba, Eu) for phosphor-converted pc-LEDs were synthesized at low temperatures using a novel precursor route involving metal amides M(NH2)2. These precursors have been synthesized by dissolution of the respective metals in supercritical ammonia at 150°C and 300 bar. The thermal behavior and decomposition process of the amides were investigated with temperature programmed powder X-ray diffractometry and thermoanalytical measurements (DTA/TG). These investigations rendered the amides as suitable intermediates for reaction with silicon diimide (Si(NH)2). Thus, the desired nitridosilicate phosphors were obtained at relatively low temperatures around 1150−1400°C which is approximately 300°C lower compared to common synthetic approaches starting from metals or oxides. The influence of the thermal treatment on the phosphor morphology has been studied extensively. The accessibility of spherical phosphor particles represents another striking feature of this route since it improves light extraction from the crystallites due to decreasing light guiding and decreasing re-absorption inside the phosphor particle. The synthesized luminescent materials M2Si5N8:Eu2+ (M = Sr, Ba) exhibit quantum efficiencies and emission band widths (FWHM 70−90 nm) comparable to standard phosphor powders. Employment of Eu(NH2)2 as dopant reagent for synthesis of Ba2Si5N8:Eu2+ proved favorable for the formation of spherical crystallites compared to doping with Eu metal, halides, or oxide

Cathodoluminescence of Double Layers of Phosphor Particles

This article has been made available through the Brunel Open Access Publishing Fund.We present radiance measurements of particle layers of ZnO:Zn, Y2O3:Eu and Y2O2S:Eu bombarded with electrons at anode voltages between 1 and 15 kV. The layers described in this work refer to single component layers, double layers and two component mixtures. The phosphor layers are deposited on ITO-coated glass slides by settling; the efficiency of the cathodoluminescence is determined by summing the radiances and luminances in the reflected and transmitted modes respectively. The efficiency of a double layer of Y2O3:Eu on top of ZnO:Zn at high electron energy is significantly larger than the efficiency of a corresponding layer in which the two components are mixed. This result is interpreted in terms of the penetration-model, which predicts a larger efficiency for a high-voltage phosphor on top of a low-voltage phosphor. When a layer of the low-voltage phosphor ZnO:Zn is on top of the high-voltage phosphor Y2O3:Eu, we also observe a higher efficiency than that of the corresponding layer with both components mixed. In this case the efficiency increases due to suppression of charging in the Y2O3:Eu layer. Double layers of ZnO:Zn and Y2O2S:Eu did not show enhanced efficiency, because the size of the Y2O2S:Eu particles was too large to evoke the penetration effect. © The Author(s) 2014. Published by ECS

A novel method for the preparation of non-agglomerated nanometre sized particles of lanthanum phosphate phosphors utilising a high surface area support in the firing process

This journal is © The Royal Society of Chemistry 2012A convenient method is described that uses a quartz wool substrate to immobilise nanometre sized phosphor precursor particles enabling them to be fired at high temperature without sintering/agglomeration. The nanometre sized phosphor particles are easily removed from the substrate by re-dispersion into liquid for subsequent use.Biotechnology and biological sciences research council (BBSRC

Laser discrimination by stimulated emission of a phosphor

A method for discriminating sources of UV, near infrared, and far infrared laser radiation was discovered. This technology is based on the use of a single magnesium sulfide phosphor doubly doped with rare earth ions, which is thermally/optically stimulated to generate colors correlatable to the incident laser radiation. The phosphor, after initial charging by visible light, exhibits green stimulated luminescence when exposed to a near infrared source (Nd: YAG laser). On exposure to far infrared sources (CO2 laser) the phosphor emission changes to orange color. A UV laser produces both an orange red as well as green color. A device using this phosphor is useful for detecting the laser and for discriminating between the near infrared, far infrared, and UV lasers. The technology is also capable of infrared laser diode beam profiling since the radiation source leaves an imprint on the phosphor that can be photographed. Continued development of the technology offers potential for discrimination between even smaller bandwidths within the infrared spectrum, a possible aid to communication or wavemixing devices that need to rapidly identify and process optical signals

Radiation sensitive area detection device and method

A radiation sensitive area detection device for use in conjunction with an X ray, ultraviolet or other radiation source is provided which comprises a phosphor containing film which releases a stored diffraction pattern image in response to incoming light or other electromagnetic wave. A light source such as a helium-neon laser, an optical fiber capable of directing light from the laser source onto the phosphor film and also capable of channelling the fluoresced light from the phosphor film to an integrating sphere which directs the light to a signal processing means including a light receiving means such as a photomultiplier tube. The signal processing means allows translation of the fluoresced light in order to detect the original pattern caused by the diffraction of the radiation by the original sample. The optical fiber is retained directly in front of the phosphor screen by a thin metal holder which moves up and down across the phosphor screen and which features a replaceable pinhole which allows easy adjustment of the resolution of the light projected onto the phosphor film. The device produces near real time images with high spatial resolution and without the distortion that accompanies prior art devices employing photomultiplier tubes. A method is also provided for carrying out radiation area detection using the device of the invention