Ultra-wideband radio signals distribution in FTTH networks

The use of an ultra-wideband (UWB) radio technique is proposed as a viable solution for the distribution of high-definition audio/video content in fiber-to-the-home (FTTH) networks. The approach suitability is demonstrated by the transmission of standards-based UWB signals at 1.25 Gb/s along different FTTH fiber links with 25 km up to 60 km of standard single-mode fiber length in a laboratory experiment. Experimental results suggest that orthogonal frequency-division-multiplexed UWB signals exhibit better transmission performance in FFTH networks than impulse radio UWB signals

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Multi-band OFDM UWB receiver with narrowband interference suppression

A multi band orthogonal frequency division multiplexing (MB-OFDM) compatible ultra wideband (UWB) receiver with narrowband interference (NBI) suppression capability is presented. The average transmit power of UWB system is limited to -41.3 dBm/MHz in order to not interfere existing narrowband systems. Moreover, it must operate even in the presence of unintentional radiation of FCC Class-B compatible devices. If this unintentional radiation resides in the UWB band, it can jam the communication. Since removing the interference in digital domain requires higher dynamic range of analog front-end than removing it in analog domain, a programmable analog notch filter is used to relax the receiver requirements in the presence of NBI. The baseband filter is placed before the variable gain amplifier (VGA) in order to reduce the signal swing at the VGA input. The frequency hopping period of MB-OFDM puts a lower limit on the settling time of the filter, which is inverse proportional to notch bandwidth. However, notch bandwidth should be low enough not to attenuate the adjacent OFDM tones. Since these requirements are contradictory, optimization is needed to maximize overall performance. Two different NBI suppression schemes are tested. In the first scheme, the notch filter is operating for all sub-bands. In the second scheme, the notch filter is turned on during the sub-band affected by NBI. Simulation results indicate that the UWB system with the first and the second suppression schemes can handle up to 6 dB and 14 dB more NBI power, respectively. The results of this work are not limited to MB-OFDM UWB system, and can be applied to other frequency hopping systems

Novel wireless modulation technique based on noise

In this paper, a new RF modulation technique is presented. Instead of using sinusoidal carriers as information bearer, pure noise is applied. This allows very simple radio architectures to be used. Spread-spectrum based technology is applied to modulate the noise bearer. Since the transmission bandwidth of the noise bearer can be made very wide, up to ultra-wideband regions, extremely large processing gains can be obtained. This will provide robustness in interference-prone environments. To avoid the local regeneration of the noise reference at the receiver, the Transmit-Reference (TR) concept is applied. In this concept, both the reference noise signal and the modulated noise signal are transmitted, together forming\ud the bearer. The reference and modulated signals are separated by applying a time offset. By applying different delay times for different channels (users) a new multiple access scheme results based on delay: Delay Division Multiple Access (DDMA). A theoretical analysis is given for the link performance of a single-user and a multi-user system. A testbed has been built to demonstrate the concept. The demonstrator operates in a 50 MHz bandwidth centered at 2.4 GHz. Processing gains ranging from 10¿30 dB have been tested. The testbed confirms the basic behavior as predicted by the theory

Integrated performance analysis of UWB wireless optical transmission in FTTH networks

The optical transmission of full standard ECMA_368 OFDM_UWB signals 400 Mbit/s per single user over 50 km SSMF, and the impact of optical transmission in the radio performance experimentally analyzed in this paper

Radio-over-fibre technologies arising from the Building the future Optical Network in Europe (BONE) project

[EN] This study describes a wide range of salient radio-over-fibre system issues. Impulse radio and multiband ultra-wideband signal distribution over both single-mode fibre and multi-mode fibre (MMF) implementations are considered. Carrier frequencies ranging from 3.1 to 10.6 GHz, up to 60 GHz, are featured, and the use of microring laser transmitters is discussed. A cost-performance comparative analysis of competing distributed antenna system topologies is presented, and a theoretical approach to understanding the factors underlying radio-over-MMF performance for within-building applications is discussed. Finally, techniques to minimise thermal impacts on performance are described and novel energy-efficient schemes are introduced. Overall, this study provides a snap-shot of research being undertaken by European institutes involved in the Building the future Optical Network in Europe (BONE) project.The work described in this paper was carried out with the support of the EU-FP7 Network of Excellence BONE project.Parker, M.; Walker, SD.; Llorente, R.; Morant, M.; Beltrán, M.; Möllers, I.; Jäger, D.... (2010). Radio-over-fibre technologies arising from the Building the future Optical Network in Europe (BONE) project. IET Optoelectronics. 4(6):247-259. https://doi.org/10.1049/iet-opt.2009.0062S24725946http://www.ftthcouncil.euGomes, N. J., Morant, M., Alphones, A., Cabon, B., Mitchell, J. E., Lethien, C., … Iezekiel, S. (2009). Radio-over-fiber transport for the support of wireless broadband services [Invited]. Journal of Optical Networking, 8(2), 156. doi:10.1364/jon.8.000156Thakur, M. P., Quinlan, T. J., Bock, C., Walker, S. D., Toycan, M., Dudley, S. E. M., … Ben-Ezra, Y. (2009). 480-Mbps, Bi-Directional, Ultra-Wideband Radio-Over-Fiber Transmission Using a 1308/1564-nm Reflective Electro-Absorption Transducer and Commercially Available VCSELs. Journal of Lightwave Technology, 27(3), 266-272. doi:10.1109/jlt.2008.2005644ECMA-368 International Standard: ‘High rate ultra wideband PHY and MAC standard’, December 2008FCC 02-48: ‘Revision of part 15 of the commission's rules regarding ultra-wideband transmission systems’, April 2002ECC∕DEC∕(06)04: ‘On the harmonised conditions for devices using ultra-wideband (UWB) technology in bands below 10.6 GHz’, March 2006ETSI EN 302 065 V1.1.1 (2008-02): ‘Electromagnetic compatibility and radio spectrum matters (ERM); ultra wideband (UWB) technologies for communication purposes; harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive’, February 2008WiMedia Alliance: Worldwide regulatory status [online]. Available at: http://www.wimedia.orgMikroulis, S., Simos, H., Roditi, E., & Syvridis, D. (2005). Ultrafast all-optical AND logic operation based on four-wave mixing in a passive InGaAsP-InP microring resonator. IEEE Photonics Technology Letters, 17(9), 1878-1880. doi:10.1109/lpt.2005.853260Argyris, A., Hamacher, M., Chlouverakis, K. E., Bogris, A., & Syvridis, D. (2008). Photonic Integrated Device for Chaos Applications in Communications. Physical Review Letters, 100(19). doi:10.1103/physrevlett.100.194101Win, M. Z., & Scholtz, R. A. (1998). On the robustness of ultra-wide bandwidth signals in dense multipath environments. IEEE Communications Letters, 2(2), 51-53. doi:10.1109/4234.660801Flatman, A.: In-premises optical fibre installed base analysis to 2007. Presented at the IEEE 802.3 10GbE over FDDI Grade Fibre Study Group, Orlando, FL, March 2004Raddatz, L., & White, I. H. (1999). Overcoming the modal bandwidth limitation of multimode fiber by using passband modulation. IEEE Photonics Technology Letters, 11(2), 266-268. doi:10.1109/68.740725Hartmann, P., Xin Qian, Wonfor, A., Penty, R. V., & White, I. H. (2005). 1-20 GHz Directly Modulated Radio over MMF Link. 2005 International Topical Meeting on Microwave Photonics. doi:10.1109/mwp.2005.203548Kanprachar, S., & Jacobs, I. (2003). Diversity coding for subcarrier multiplexing on multimode fibers. IEEE Transactions on Communications, 51(9), 1546-1553. doi:10.1109/tcomm.2003.816981Gasulla, I., & Capmany, J. (2006). Transfer function of multimode fiber links using an electric field propagation model: Application to Radio over Fibre Systems. Optics Express, 14(20), 9051. doi:10.1364/oe.14.009051Al-Raweshidy, H., and Komaki, S.: ‘Radio over fiber technologies for mobile communication networks’, (Artech House 2002)Sauer, M., Kobyakov, A., & George, J. (2007). Radio Over Fiber for Picocellular Network Architectures. Journal of Lightwave Technology, 25(11), 3301-3320. doi:10.1109/jlt.2007.906822Gomes, N. J., Nkansah, A., & Wake, D. (2008). Radio-Over-MMF Techniques—Part I: RF to Microwave Frequency Systems. Journal of Lightwave Technology, 26(15), 2388-2395. doi:10.1109/jlt.2008.925624Rajan, G., Semenova, Y., Pengfei Wang, & Farrell, G. (2009). Temperature-Induced Instabilities in Macro-Bend Fiber Based Wavelength Measurement Systems. Journal of Lightwave Technology, 27(10), 1355-1361. doi:10.1109/jlt.2009.2014081Montalvo, J., Vázquez, C., & Montero, D. S. (2006). CWDM self-referencing sensor network based on ring resonators in reflective configuration. Optics Express, 14(11), 4601. doi:10.1364/oe.14.00460

A Study of Channel Estimation in Multi-Band OFDM UWB Systems

In this paper, the channel estimation techniques for multiband (MB) OFDM ultra-wideband (UWB) wireless communications are investigated. By combining orthogonal frequency-division multiplexing (OFDM) with multi-band, the MB-OFDM systems can capture multipath energy more efficiently than single-band direct sequence UWB (DS-UWB). However, most researches for UWB channel estimation are focused on the latter. Through the analysis of architecture, signal and channel model of MB-OFDM UWB wireless systems, we studied the channel estimation techniques based on preamble training sequences and pilot sub-carriers respectively. Further more, the linear estimations of least square (LS) and minimum mean square error (MMSE) are analysed and compared under different UWB channel conditions. The characteristic of estimation error changing with the SNR is also discussed. The estimation error includes the impact of interpolation error and channel noise