TCP performance over end-to-end rate control and stochastic available capacity

Motivated by TCP over end-to-end ABR, we study the performance of adaptive window congestion control, when it operates over an explicit feedback rate-control mechanism, in a situation in which the bandwidth available to the elastic traffic is stochastically time varying. It is assumed that the sender and receiver of the adaptive window protocol are colocated with the rate-control endpoints. The objective of the study is to understand if the interaction of the rate-control loop and the window-control loop is beneficial for end-to-end throughput, and how the parameters of the problem (propagation delay, bottleneck buffers, and rate of variation of the available bottleneck bandwidth) affect the performance.The available bottleneck bandwidth is modeled as a two-state Markov chain. We develop an analysis that explicitly models the bottleneck buffers, the delayed explicit rate feedback, and TCP's adaptive window mechanism. The analysis, however, applies only when the variations in the available bandwidth occur over periods larger than the round-trip delay. For fast variations of the bottleneck bandwidth, we provide results from a simulation on a TCP testbed that uses Linux TCP code, and a simulation/emulation of the network model inside the Linux kernel.We find that, over end-to-end ABR, the performance of TCP improves significantly if the network bottleneck bandwidth variations are slow as compared to the round-trip propagation delay. Further, we find that TCP over ABR is relatively insensitive to bottleneck buffer size. These results are for a short-term average link capacity feedback at the ABR level (INSTCAP). We use the testbed to study EFFCAP feedback, which is motivated by the notion of the effective capacity of the bottleneck link. We find that EFFCAP feedback is adaptive to the rate of bandwidth variations at the bottleneck link, and thus yields good performance (as compared to INSTCAP) over a wide range of the rate of bottleneck bandwidth variation. Finally, we study if TCP over ABR, with EFFCAP feedback, provides throughput fairness even if the connections have different round-trip propagation delays

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Avaliação de desempenho de comutadores ATM /

Dissertação (Mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico

Future of asynchronous transfer mode networking

The growth of Asynchronous Transfer Mode (ATM) was considered to be the ideal carrier of the high bandwidth applications like video on demand and multimedia e-learning. ATM emerged commercially in the beginning of the 1990\u27s. It was designed to provide a different quality of service at a speed up 100 Gbps for both real time and non real time application. The turn of the 90\u27s saw a variety of technologies being developed. This project analyzes these technologies, compares them to the Asynchronous Transfer Mode and assesses the future of ATM

Novel techniques in large scaleable ATM switches

Bibliography: p. 172-178.This dissertation explores the research area of large scale ATM switches. The requirements for an ATM switch are determined by overviewing the ATM network architecture. These requirements lead to the discussion of an abstract ATM switch which illustrates the components of an ATM switch that automatically scale with increasing switch size (the Input Modules and Output Modules) and those that do not (the Connection Admission Control and Switch Management systems as well as the Cell Switch Fabric). An architecture is suggested which may result in a scalable Switch Management and Connection Admission Control function. However, the main thrust of the dissertation is confined to the cell switch fabric. The fundamental mathematical limits of ATM switches and buffer placement is presented next emphasising the desirability of output buffering. This is followed by an overview of the possible routing strategies in a multi-stage interconnection network. A variety of space division switches are then considered which leads to a discussion of the hypercube fabric, (a novel switching technique). The hypercube fabric achieves good performance with an O(N.log₂N)²) scaling. The output module, resequencing, cell scheduling and output buffering technique is presented leading to a complete description of the proposed ATM switch. Various traffic models are used to quantify the switch's performance. These include a simple exponential inter-arrival time model, a locality of reference model and a self-similar, bursty, multiplexed Variable Bit Rate (VBR) model. FIFO queueing is simple to implement in an ATNI switch, however, more responsive queueing strategies can result in an improved performance. An associative memory is presented which allows the separate queues in the ATM switch to be effectively logically combined into a single FIFO queue. The associative memory is described in detail and its feasibility is shown by laying out the Integrated Circuit masks and performing an analogue simulation of the IC's performance is SPICE3. Although optimisations were required to the original design, the feasibility of the approach is shown with a 15Ƞs write time and a 160Ƞs read time for a 32 row, 8 priority bit, 10 routing bit version of the memory. This is achieved with 2µm technology, more advanced technologies may result in even better performance. The various traffic models and switch models are simulated in a number of runs. This shows the performance of the hypercube which outperforms a Clos network of equivalent technology and approaches the performance of an ideal reference fabric. The associative memory leverages a significant performance advantage in the hypercube network and a modest advantage in the Clos network. The performance of the switches is shown to degrade with increasing traffic density, increasing locality of reference, increasing variance in the cell rate and increasing burst length. Interestingly, the fabrics show no real degradation in response to increasing self similarity in the fabric. Lastly, the appendices present suggestions on how redundancy, reliability and multicasting can be achieved in the hypercube fabric. An overview of integrated circuits is provided. A brief description of commercial ATM switching products is given. Lastly, a road map to the simulation code is provided in the form of descriptions of the functionality found in all of the files within the source tree. This is intended to provide the starting ground for anyone wishing to modify or extend the simulation system developed for this thesis

IP and ATM integration: A New paradigm in multi-service internetworking

ATM is a widespread technology adopted by many to support advanced data communication, in particular efficient Internet services provision. The expected challenges of multimedia communication together with the increasing massive utilization of IP-based applications urgently require redesign of networking solutions in terms of both new functionalities and enhanced performance. However, the networking context is affected by so many changes, and to some extent chaotic growth, that any approach based on a structured and complex top-down architecture is unlikely to be applicable. Instead, an approach based on finding out the best match between realistic service requirements and the pragmatic, intelligent use of technical opportunities made available by the product market seems more appropriate. By following this approach, innovations and improvements can be introduced at different times, not necessarily complying with each other according to a coherent overall design. With the aim of pursuing feasible innovations in the different networking aspects, we look at both IP and ATM internetworking in order to investigating a few of the most crucial topics/ issues related to the IP and ATM integration perspective. This research would also address various means of internetworking the Internet Protocol (IP) and Asynchronous Transfer Mode (ATM) with an objective of identifying the best possible means of delivering Quality of Service (QoS) requirements for multi-service applications, exploiting the meritorious features that IP and ATM have to offer. Although IP and ATM often have been viewed as competitors, their complementary strengths and limitations from a natural alliance that combines the best aspects of both the technologies. For instance, one limitation of ATM networks has been the relatively large gap between the speed of the network paths and the control operations needed to configure those data paths to meet changing user needs. IP\u27s greatest strength, on the other hand, is the inherent flexibility and its capacity to adapt rapidly to changing conditions. These complementary strengths and limitations make it natural to combine IP with ATM to obtain the best that each has to offer. Over time many models and architectures have evolved for IP/ATM internetworking and they have impacted the fundamental thinking in internetworking IP and ATM. These technologies, architectures, models and implementations will be reviewed in greater detail in addressing possible issues in integrating these architectures s in a multi-service, enterprise network. The objective being to make recommendations as to the best means of interworking the two in exploiting the salient features of one another to provide a faster, reliable, scalable, robust, QoS aware network in the most economical manner. How IP will be carried over ATM when a commercial worldwide ATM network is deployed is not addressed and the details of such a network still remain in a state of flux to specify anything concrete. Our research findings culminated with a strong recommendation that the best model to adopt, in light of the impending integrated service requirements of future multi-service environments, is an ATM core with IP at the edges to realize the best of both technologies in delivering QoS guarantees in a seamless manner to any node in the enterprise

IP and ATM - current evolution for integrated services

Current and future applications make use of different technologies as voice, data, and video. Consequently network technologies need to support them. For many years, the ATM based Broadband-ISDN has generally been regarded as the ultimate networking technology, which can integrate voice, data, and video services. With the recent tremendous growth of the Internet and the reluctant deployment of public ATM networks, the future development of ATM seems to be less clear than it used to be. In the past IP provided (and was though to provide) only best effort services, thus, despite its world wide diffution, was not considered as a network solution for multimedia application. Currently many of the IETF working groups work on areas related to integrated services, and IP is also proposing itself as networking technology for supporting voice, data, and video services. This paper give a technical overview on the competing integrated services network solutions, such as IP, ATM and the different available and emerging technologies on how to run IP over ATM, and tries to identify their potential and shortcomings