2,299 research outputs found
Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results
Fixed and mobile telecom operators, enterprise network operators and cloud
providers strive to face the challenging demands coming from the evolution of
IP networks (e.g. huge bandwidth requirements, integration of billions of
devices and millions of services in the cloud). Proposed in the early 2010s,
Segment Routing (SR) architecture helps face these challenging demands, and it
is currently being adopted and deployed. SR architecture is based on the
concept of source routing and has interesting scalability properties, as it
dramatically reduces the amount of state information to be configured in the
core nodes to support complex services. SR architecture was first implemented
with the MPLS dataplane and then, quite recently, with the IPv6 dataplane
(SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering
of packets across nodes to a general network programming approach, making it
very suitable for use cases such as Service Function Chaining and Network
Function Virtualization. In this paper we present a tutorial and a
comprehensive survey on SR technology, analyzing standardization efforts,
patents, research activities and implementation results. We start with an
introduction on the motivations for Segment Routing and an overview of its
evolution and standardization. Then, we provide a tutorial on Segment Routing
technology, with a focus on the novel SRv6 solution. We discuss the
standardization efforts and the patents providing details on the most important
documents and mentioning other ongoing activities. We then thoroughly analyze
research activities according to a taxonomy. We have identified 8 main
categories during our analysis of the current state of play: Monitoring,
Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path
Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL
A Survey on the Contributions of Software-Defined Networking to Traffic Engineering
Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567
Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-
SDN/NFV-enabled satellite communications networks: opportunities, scenarios and challenges
In the context of next generation 5G networks, the satellite industry is clearly committed to revisit and revamp the role of satellite communications. As major drivers in the evolution of (terrestrial) fixed and mobile networks, Software Defined Networking (SDN) and Network Function Virtualisation (NFV) technologies are also being positioned as central technology enablers towards improved and more flexible integration of satellite and terrestrial segments, providing satellite network further service innovation and business agility by advanced network resources management techniques. Through the analysis of scenarios and use cases, this paper provides a description of the benefits that SDN/NFV technologies can bring into satellite communications towards 5G. Three scenarios are presented and analysed to delineate different potential improvement areas pursued through the introduction of SDN/NFV technologies in the satellite ground segment domain. Within each scenario, a number of use cases are developed to gain further insight into specific capabilities and to identify the technical challenges stemming from them.Peer ReviewedPostprint (author's final draft
Performance Enhancement of Quality of Service of IP Mobility for Real-Time Traffic
Future Internet traffic will be huge both for real time and non-real time traffic in an IP mobility environment due to proliferation of mobile nodes. MIPv4 is one of IETF defined IP mobility protocols but with QoS issues like end-to-end delay due to triangular routing, jitter and throughput. OPNET Modeler 14.5 was used in this research to simulate MIPv4 based WiMax network combining MPLS and Diffserv to improve upon the service quality of the network. The end-to-end delay for 20 mobile nodes (MN) was reduced considerably to less than 0.09 second for VoIP traffic and 0.7 second for video conferencing. Jitter was virtually eliminated and good improvement on service throughput. With this improvement in MIPv4 network performance, it can be integrated with MIPv6 network for better future Internet service delivery
Recommended from our members
Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network.
This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution.
This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement
Micro-Mobile MPLS : Performance Analysis and Improvement with RSSI
In this paper we propose the method to decrease the numbers of losing packet while moving across the network by Received Signal Strength Indicator (RSSI) Technique using define appropriately signal strength between MN (Mobile Node) and FA (Foreign Agent). We use this technique to serve in Micro-Mobility MPLS for improvement sending packet. The simulation has improved the performance of Mobile MPLS by reducing losing packet
- …