574 research outputs found
A novel approach to robust radar detection of range-spread targets
This paper proposes a novel approach to robust radar detection of
range-spread targets embedded in Gaussian noise with unknown covariance matrix.
The idea is to model the useful target echo in each range cell as the sum of a
coherent signal plus a random component that makes the signal-plus-noise
hypothesis more plausible in presence of mismatches. Moreover, an unknown power
of the random components, to be estimated from the observables, is inserted to
optimize the performance when the mismatch is absent. The generalized
likelihood ratio test (GLRT) for the problem at hand is considered. In
addition, a new parametric detector that encompasses the GLRT as a special case
is also introduced and assessed. The performance assessment shows the
effectiveness of the idea also in comparison to natural competitors.Comment: 28 pages, 8 figure
Design of Customized Adaptive Radar Detectors in the CFAR Feature Plane
The paper addresses the design of adaptive radar detectors with desired behavior, in Gaussian disturbance with unknown statistics. Specifically, based on detection probability specifications for chosen signal-to-noise ratios and steering vector mismatch levels, a methodology for the design of customized constant false alarm rate (CFAR) detectors is devised in a suitable feature plane obtained from two maximal invariant statistics. To overcome the analytical and numerical intractability of the resulting optimization problem, a novel general reduced-complexity algorithm is developed, which is shown to be effective in providing a feasible solution (i.e., fulfilling a constraint on the probability of false alarm) while controlling the behavior under both matched and mismatched conditions, so enabling the design of fully customized adaptive CFAR detectors
Remote Sensing
This dual conception of remote sensing brought us to the idea of preparing two different books; in addition to the first book which displays recent advances in remote sensing applications, this book is devoted to new techniques for data processing, sensors and platforms. We do not intend this book to cover all aspects of remote sensing techniques and platforms, since it would be an impossible task for a single volume. Instead, we have collected a number of high-quality, original and representative contributions in those areas
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Target Detection Architecture for Resource Constrained Wireless Sensor Networks within Internet of Things
Wireless sensor networks (WSN) within Internet of Things (IoT) have the potential
to address the growing detection and classi�cation requirements among many
surveillance applications. RF sensing techniques are the next generation technologies
which o�er distinct advantages over traditional passive means of sensing
such as acoustic and seismic which are used for surveillance and target detection
applications of WSN. RF sensing based WSN within IoT detect the presence of
designated targets by transmitting RF signals into the sensing environment and
observing the re
ected echoes. In this thesis, an RF sensing based target detection
architecture for surveillance applications of WSN has been proposed to detect the
presence of stationary targets within the sensing environment.
With multiple sensing nodes operating simultaneously within the sensing region,
diversity among the sensing nodes in the choice of transmit waveforms is required.
Existing multiple access techniques to accommodate multiple sensing nodes within
the sensing environment are not suitable for RF sensing based WSN. In this thesis,
a diversity in the choice of the transmit waveforms has been proposed and transmit
waveforms which are suitable for RF sensing based WSN have been discussed. A
criterion have been de�ned to quantify the ease of detecting the signal and energy
e�ciency of the signal based on which ease of detection index and energy e�ciency
index respectively have been generated. The waveform selection criterion proposed
in this thesis takes the WSN sensing conditions into account and identi�es the
optimum transmit waveform within the available choices of transmit waveforms
based on their respective ease of detection and energy e�ciency indexes.
A target detector analyses the received RF signals to make a decision regarding
the existence or absence of targets within the sensing region. Existing target detectors
which are discussed in the context of WSN do not take the factors such
as interference and nature of the sensing environment into account. Depending
on the nature of the sensing environment, in this thesis the sensing environments are classi�ed as homogeneous and heterogeneous sensing environments. Within
homogeneous sensing environments the presence of interference from the neighbouring
sensing nodes is assumed. A target detector has been proposed for WSN
within homogeneous sensing environments which can reliably detect the presence
of targets. Within heterogeneous sensing environments the presence of clutter and
interfering waveforms is assumed. A target detector has been proposed for WSN
within heterogeneous sensing environments to detect targets in the presence of
clutter and interfering waveforms. A clutter estimation technique has been proposed
to assist the proposed target detector to achieve increased target detection
reliability in the presence of clutter. A combination of compressive and two-step
target detection architectures has been proposed to reduce the transmission costs.
Finally, a 2-stage target detection architecture has been proposed to reduce the
computational complexity of the proposed target detection architecture
Improvement of detection and tracking techniques in multistatic passive radar systems. (Mejora de técnicas de detección y seguimiento en sistemas radar pasivos multiestáticos)
Esta tesis doctoral es el resultado de una intensa actividad investigadora centrada en los sensores radar pasivos para la mejora de las capacidades de detección y seguimiento en escenarios complejos con blancos terrestres y pequeños drones.
El trabajo de investigación se ha llevado a cabo en el grupo de investigación coordinado por la Dra. María Pilar Jarabo Amores, dentro del marco diferentes proyectos: IDEPAR (“Improved DEtection techniques for PAssive Radars”), MASTERSAT (“MultichAnnel paSsive radar receiver exploiting TERrestrial and SATellite Illuminators”) y KRIPTON (“A Knowledge based appRoach to passIve radar detection using wideband sPace adapTive prOcessiNg”) financiados por el Ministerio de Economía y Competitividad de España; MAPIS (Multichannel passive ISAR imaging for military applications) y JAMPAR (“JAMmer-based PAssive Radar”), financiados por la Agencia Europea de Defensa (EDA) .
El objetivo principal es la mejora de las técnicas de detección y seguimiento en radares pasivos con configuraciones biestáticas y multiestaticas. En el documento se desarrollan algoritmos para el aprovechamiento de señales procedentes de distintos iluminadores de oportunidad (transmisores DVB-T, satélites DVB-S y señales GPS). Las soluciones propuestas han sido integradas en el demostrador tecnológico IDEPAR, desarrollado y actualizado bajo los proyectos mencionados, y validadas en escenarios reales declarados de interés por potenciales usuarios finales (Direccion general de armamento y material, instituto nacional de tecnología aeroespacial y la armada española). Para el desarrollo y evaluación de cadenas de las cadenas de procesado, se plantean dos casos de estudio: blancos terrestres en escenarios semiurbanos edificios y pequeños blancos aéreos en escenarios rurales y costeros. Las principales contribuciones se pueden resumir en los siguientes puntos:
• Diseño de técnicas de seguimiento 2D en el espacio de trabajo rango biestático-frecuencia Doppler: se desarrollan técnicas de seguimiento para los dos casos de estudio, localización de blancos terrestres y pequeños drones. Para es último se implementan técnicas capaces de seguir tanto el movimiento del dron como su firma Doppler, lo que permite implementar técnicas de clasificación de blancos.
• Diseño de técnicas de seguimiento de blancos capaces de integrar información en el espacio 3D (rango, Doppler y acimut): se diseñan técnicas basadas en procesado en dos etapas, una primera con seguimiento en 2D para el filtrado de falsas alarmas y la segunda para el seguimiento en 3D y la conversión de coordenadas a un plano local cartesiano. Se comparan soluciones basadas en filtros de Kalman para sistemas tanto lineales como no lineales.
• Diseño de cadenas de procesado para sistemas multiestáticos: la información estimada del blanco sobre múltiples geometrías biestáticas es utilizada para incremento de las capacidades de localización del blanco en el plano cartesiano local. Se presentan soluciones basadas en filtros de Kalman para sistemas no lineales explotando diferentes medidas biestáticas en el proceso de transformación de coordenadas, analizando las mejoras de precisión en la localización del blanco.
• Diseño de etapas de procesado para radares pasivos basados en señales satelitales de las constelaciones GPS DVB-S. Se estudian las características de las señales satelitales identificando sus inconvenientes y proponiendo cadenas de procesado que permitan su utilización para la detección y seguimiento de blancos terrestres.
• Estudio del uso de señales DVB-T multicanal con gaps de transmisión entre los diferentes canales en sistemas radares pasivos. Con ello se incrementa la resolución del sistema, y las capacidades de detección, seguimiento y localización. Se estudia el modelo de señal multicanal, sus efectos sobre el procesado coherente y se proponen cadenas de procesado para paliar los efectos adversos de este tipo de señales
- …