Design of Super Twisting Integral Sliding Mode Control for Industrial Robot Manipulator

In the present work, integral sliding mode based continuous control algorithm is extended to multi input multi output system. The typical integral sliding mode control (ISMC) contains nominal control with discontinuous feedback control due to which overall control becomes discontinuous in nature. The proposed controller is a fusion of two continuous terms and one of which is able to handle, estimate and reject the disturbance successfully. A proposed robust ISMC technique is applied for industrial robot manipulators which utilizes interactive manipulation activity. Here, robust position tracking control obtained via ISMC principle for two link IRM scheme influenced by parametric uncertainties and external disturbances. The proposed ISMC design replaces the discontinuous part by continuous control, which super twisting control is able to handle the disturbance rejection completely. The effectiveness of the proposed control technique is tested under uncertain conditions and comparison study with other controllers has been done. The simulation result shows that the tracking error is effectively minimized by the proposed technique in presence of uncertain conditions

A passivity approach to controller-observer design for robots

Passivity-based control methods for robots, which achieve the control objective by reshaping the robot system's natural energy via state feedback, have, from a practical point of view, some very attractive properties. However, the poor quality of velocity measurements may significantly deteriorate the control performance of these methods. In this paper the authors propose a design strategy that utilizes the passivity concept in order to develop combined controller-observer systems for robot motion control using position measurements only. To this end, first a desired energy function for the closed-loop system is introduced, and next the controller-observer combination is constructed such that the closed-loop system matches this energy function, whereas damping is included in the controller- observer system to assure asymptotic stability of the closed-loop system. A key point in this design strategy is a fine tuning of the controller and observer structure to each other, which provides solutions to the output-feedback robot control problem that are conceptually simple and easily implementable in industrial robot applications. Experimental tests on a two-DOF manipulator system illustrate that the proposed controller-observer systems enable the achievement of higher performance levels compared to the frequently used practice of numerical position differentiation for obtaining a velocity estimat

Control strategies for robotic manipulators

This survey is aimed at presenting the major robust control strategies for rigid robot manipulators. The techniques discussed are feedback linearization/Computed torque control, Variable structure compensator, Passivity based approach and Disturbance observer based control. The first one is based on complete dynamic model of a robot. It results in simple linear control which offers guaranteed stability. Variable structure compensator uses a switching/relay action to overcome dynamic uncertainties and disturbances. Passivity based controller make use of passive structure of a robot. If passivity of a feedback system is proved, nonlinearities and uncertainties will not affect the stability. Disturbance observer based controllers estimate disturbances, which can be cancelled out to achieve a nominal model, for which a simple controller can then be designed. This paper, after explaining each control strategy in detail, finally compares these strategies for their pros and cons. Possible solutions to cope with the drawbacks have also been presented in tabular form. © 2012 IEEE

Some issues in the sliding mode control of rigid robotic manipulators

This thesis investigates the problem of robust adaptive sliding mode control for nonlinear rigid robotic manipulators. A number of robustness and convergence results are presented for sliding mode control of robotic manipulators with bounded unknown disturbances, nonlinearities, dynamical couplings and parameter uncertainties. The highlights of the research work are summarized below : • A robust adaptive tracking control for rigid robotic manipulators is proposed. In this scheme, the parameters of the upper bound of system uncertainty are adaptively estimated. The controller estimates are then used as controller parameters to eliminate the effects of system uncertainty and guarantee asymptotic error convergence. • A decentralised adaptive sliding mode control scheme for rigid robotic manipulators is proposed. The known dynamics of the partially known robotic manipulator are separated out to perform linearization. A local feedback controller is then designed to stabilize each subsystem and an adaptive sliding mode compensator is used to handle the effects of uncertain system dynamics. The developed scheme guarantees that the effects of system dynamics are eliminated and that asymptotic error convergence is obtained with respect to the overall robotic control system. • A model reference adaptive control using the terminal sliding mode technique is proposed. A multivariable terminal sliding mode is defined for a model following control system for rigid robotic manipulators. A terminal sliding mode controller is then designed based on only a few uncertain system matrix bounds. The result is a simple and robust controller design that guarantees convergence of the output tracking error in a finite time on the terminal sliding mode

Nonlinear control for Two-Link flexible manipulator

Recently the use of robot manipulators has been increasing in many applications such as medical applications, automobile, construction, manufacturing, military, space, etc. However, current rigid manipulators have high inertia and use actuators with large energy consumption. Moreover, rigid manipulators are slow and have low payload-to arm-mass ratios because link deformation is not allowed. The main advantages of flexible manipulators over rigid manipulators are light in weight, higher speed of operation, larger workspace, smaller actuator, lower energy consumption and lower cost. However, there is no adequate closed-form solutions exist for flexible manipulators. This is mainly because flexible dynamics are modeled with partial differential equations, which give rise to infinite dimensional dynamical systems that are, in general, not possible to represent exactly or efficiently on a computer which makes modeling a challenging task. In addition, if flexibility nature wasn\u27t considered, there will be calculation errors in the calculated torque requirement for the motors and in the calculated position of the end-effecter. As for the control task, it is considered as a complex task since flexible manipulators are non-minimum phase system, under-actuated system and Multi-Input/Multi-Output (MIMO) nonlinear system. This thesis focuses on the development of dynamic formulation model and three control techniques aiming to achieve accurate position control and improving dynamic stability for Two-Link Flexible Manipulators (TLFMs). LQR controller is designed based on the linearized model of the TLFM; however, it is applied on both linearized and nonlinear models. In addition to LQR, Backstepping and Sliding mode controllers are designed as nonlinear control approaches and applied on both the nonlinear model of the TLFM and the physical system. The three developed control techniques are tested through simulation based on the developed dynamic formulation model using MATLAB/SIMULINK. Stability and performance analysis were conducted and tuned to obtain the best results. Then, the performance and stability results obtained through simulation are compared. Finally, the developed control techniques were implemented and analyzed on the 2-DOF Serial Flexible Link Robot experimental system from Quanser and the results are illustrated and compared with that obtained through simulation