Agenda: Second International Workshop on Thin Films for Electronics, Electro-Optics, Energy and Sensors (TFE3S)

University of Dayton’s Center of Excellence for Thin Film Research and Surface Engineering (CETRASE) is delighted to organize its second international workshop at the University of Dayton’s Research Institute (UDRI) campus in Dayton, Ohio, USA. The purpose of the new workshop is to exchange technical knowledge and boost technical and educational collaboration activities within the thin film research community through our CETRASE and the UDRI

Optoelectronic devices and packaging for information photonics

This thesis studies optoelectronic devices and the integration of these components onto optoelectronic multi chip modules (OE-MCMs) using a combination of packaging techniques. For this project, (1×12) array photodetectors were developed using PIN diodes with a GaAs/AlGaAs strained layer structure. The devices had a pitch of 250μm, operated at a wavelength of 850nm. Optical characterisation experiments of two types of detector arrays (shoe and ring) were successfully performed. Overall, the shoe devices achieved more consistent results in comparison with ring diodes, i.e. lower dark current and series resistance values. A decision was made to choose the shoe design for implementation into the high speed systems demonstrator. The (1x12) VCSEL array devices were the optical sources used in my research. This was an identical array at 250μm pitch configuration used in order to match the photodetector array. These devices had a wavelength of 850nm. Optoelectronic testing of the VCSEL was successfully conducted, which provided good beam profile analysis and I-V-P measurements of the VCSEL array. This was then implemented into a simple demonstrator system, where eye diagrams examined the systems performance and characteristics of the full system and showed positive results. An explanation was given of the following optoelectronic bonding techniques: Wire bonding and flip chip bonding with its associated technologies, i.e. Solder, gold stud bump and ACF. Also, technologies, such as ultrasonic flip chip bonding and gold micro-post technology were looked into and discussed. Experimental work implementing these methods on packaging the optoelectronic devices was successfully conducted and described in detail. Packaging of the optoelectronic devices onto the OEMCM was successfully performed. Electrical tests were successfully carried out on the flip chip bonded VCSEL and Photodetector arrays. These results verified that the devices attached on the MCM achieved good electrical performance and reliable bonding. Finally, preliminary testing was conducted on the fully assembled OE-MCMs. The aim was to initially power up the mixed signal chip (VCSEL driver), and then observe the VCSEL output

The Boston University Photonics Center annual report 2014-2015

This repository item contains an annual report that summarizes activities of the Boston University Photonics Center in the 2014-2015 academic year. The report provides quantitative and descriptive information regarding photonics programs in education, interdisciplinary research, business innovation, and technology development. The Boston University Photonics Center (BUPC) is an interdisciplinary hub for education, research, scholarship, innovation, and technology development associated with practical uses of light.This has been a good year for the Photonics Center. In the following pages, you will see that the center’s faculty received prodigious honors and awards, generated more than 100 notable scholarly publications in the leading journals in our field, and attracted $18.6M in new research grants/contracts. Faculty and staff also expanded their efforts in education and training, and were awarded two new National Science Foundation– sponsored sites for Research Experiences for Undergraduates and for Teachers. As a community, we hosted a compelling series of distinguished invited speakers, and emphasized the theme of Advanced Materials by Design for the 21st Century at our annual symposium. We continued to support the National Photonics Initiative, and are a part of a New York–based consortium that won the competition for a new photonics- themed node in the National Network of Manufacturing Institutes. Highlights of our research achievements for the year include an ambitious new DoD-sponsored grant for Multi-Scale Multi-Disciplinary Modeling of Electronic Materials led by Professor Enrico Bellotti, continued support of our NIH-sponsored Center for Innovation in Point of Care Technologies for the Future of Cancer Care led by Professor Catherine Klapperich, a new award for Personalized Chemotherapy Through Rapid Monitoring with Wearable Optics led by Assistant Professor Darren Roblyer, and a new award from DARPA to conduct research on Calligraphy to Build Tunable Optical Metamaterials led by Professor Dave Bishop. We were also honored to receive an award from the Massachusetts Life Sciences Center to develop a biophotonics laboratory in our Business Innovation Center

Frequency- and time-domain simulations of semiconductor optical amplifiers using equivalent circuit modeling

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)We propose an equivalent circuit modeling for a chip-on-carrier and for two encapsulated semiconductor optical amplifiers (SOAs). The models include main parasitic leaks and were used in reflection and transmission simulations, showing good agreement with experimental data. The model for each SOA is validated, comparing the simulated results with experimental data from SOAs operating as high-speed electro-optical switches, reaching rise times below 200 ps. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)We propose an equivalent circuit modeling for a chip-on-carrier and for two encapsulated semiconductor optical amplifiers (SOAs). The models include main parasitic leaks and were used in reflection and transmission simulations, showing good agreement with5411CAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIORCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)CNPq [574017/2008-9]FAPESP [2007/56024-4, 2005/51689-2]sem informação574017/2008-92007/56024-4 ; 2005/51689-2The authors thank Professor Adriano Toazza (UPF, RS/Brazil) for the software used to automate the EO transmission measurements. This work was supported in part by the Brazilian agencies CAPES and CNPq (scholarship), CNPq (under INCT-Fotonicom project, 57

NIR-emissive Alkynylplatinum(II) Terpyridyl Complex as a turn-on selective probe for heparin quantification by induced helical self-assembly behaviour

The extent of self-assembly viametal–metal and π-π stacking interactions, induced by the polyanionic biopolymers, enables the class of alkynylplatinum(II) terpyridyl complexes to be applicable for the sensing of important biomacromolecules through the monitoring of spectral changes. Strong demand arises for the design of selective and practical detection techniques for the quantification of heparin, a highly negative-charged polysaccharidethat can function as anticoagulant, due to the prevention of hemorrhagic complications upon overdose usage.Aconvenient sensing protocol for the detection of UFH and LMWH, two common forms of heparins in clinical use, in buffer and biological medium has been demonstrated with the spectral changes associated with the induced self-assembly of a NIR-emissive platinum(II) complex. The detection range has been demonstrated to cover clinical dosage levels and the structurally similar analogues can be effectively differentiated based on their anionic charge density and the formation of supramolecular helical assembly of the platinum(II) complex with them ...postprin

Induced self-assembly and Förster Resonance Energy Transfer Studies of Alkynylplatinum(II) Terpyridine Complex through interaction with water-soluble Poly(phenylene ethynylene sulfonate) and the proof-of-principle demonstration of this two-component ensemble for selective label-free detection of Human Serum Albumin (HSA)

The interaction of conjugated polyelectrolyte, PPE-SO3−, with platinum(II) complexes, [Pt(tpy)(C≡CC6H4CH2NMe3-4)](OTf)2 (1) and [Pt(tpy)(C≡C–CH2NMe3)](OTf)2 (2), has been studied by UV–vis, and steady-state and time-resolved emission spectroscopy. A unique FRET from PPE-SO3−to the aggregated complex 1on the polymer chain with PtfflfflfflPt interactionhas been demonstrated, resulting in the growth of triplet metal-metal-to-ligand charge transfer (3MMLCT) emission ...postprin