Parametric optimization of the femoropopliteal artery stent design based on numerical analysis

High-failure rates of Peripheral Arterial Disease (PAD) stenting were reported due to the inability of certain stent strut configuration to accommodate severe biomechanical environment of the Femoro-Popliteal Artery (FPA) such as bends, twists, and axially compresses during limb flexion. The unique of mechanical deformation environment in FPA has been considered one of main factors affecting the durability of the FPA stent and reducing the stent life. Consequently, various optimization techniques have been developed to improve the mechanical performance of the FPA stent. The present work shown that, the first-two of twelve FPA resemble stent models stent models have been selected with a net score of 3.65 Model I and, with a net score of 3.55 Model II via applying Pictorial Selection Method. Finite Element Method (FEM) of optimization study based-parameterization has been conducted for stent strut dimensions, stents were compared in terms of force-stress behavior. Multi Criteria Decision Making (MCDM) method has been utilized to identify the best combination of strut dimensions. The strut thickness parameterization results were in relation T α 1/σ (T is strut thickness) for both models with all mechanical loading modes. Moreover, the strut width parameterization results were in relation W α 1/σ (W is strut width) for both models with all mechanical loading modes. Whereas, the strut length parameterization results were in relation L α σ in case of Model I and, L α 1/σ (L is strut length) in case of Model II, under axial loads, while under three-point bending and torsion loading modes L α σ for both models, under radial compression the relations were L α 1/σ in case of Model I and, L α σ in case of Model II. The best combination of strut dimension in the thickness case was t4 = 230 µm for both models, in strut width were w3=0.180, and w4= 0.250 mm for Model I and Model II, respectively, and in strut length were l2= 1.40, and l2= 1.75 mm for Model I and Model II, respectively. In conclusions, the mathematical selection approach and the consistent mathematical approach of MCDM has been proposed, also the mechanical performance has been improved for parameterized stent models

A Comprehensive Review of Congestion Management in Power System

In recent decades, restructuring has cut across all probable domains, involving the power supply industry. The restructuring has brought about considerable changes whereby electricity is now a commodity and has become a deregulated one. These competitive markets have paved the way for countless entrants. This has caused overload and congestion on transmission lines. In addition, the open access transmission network has created a more intensified congestion issue. Therefore, congestion management on power systems is relevant and central significance to the power industry. This manuscript review few congestion management techniques, consists of Reprogramming Generation (GR), Load Shedding, Optimal Distributed Generation (DG) Location, Nodal Pricing, Free Methods, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Fuzzy Logic System Method, as well as Additional Renewable Energy Sources. In this manuscript a review work is performed to unite the entire publications on congestion management

A Comprehensive Review of Congestion Management in Power System

In recent decades, restructuring has cut across all probable domains, involving the power supply industry. The restructuring has brought about considerable changes whereby electricity is now a commodity and has become a deregulated one. These competitive markets have paved the way for countless entrants. This has caused overload and congestion on transmission lines. In addition, the open access transmission network has created a more intensified congestion issue. Therefore, congestion management on power systems is relevant and central significance to the power industry. This manuscript review few congestion management techniques, consists of Reprogramming Generation (GR), Load Shedding, Optimal Distributed Generation (DG) Location, Nodal Pricing, Free Methods, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Fuzzy Logic System Method, as well as Additional Renewable Energy Sources. In this manuscript a review work is performed to unite the entire publications on congestion management

International White Book on DER Protection : Review and Testing Procedures

This white book provides an insight into the issues surrounding the impact of increasing levels of DER on the generator and network protection and the resulting necessary improvements in protection testing practices. Particular focus is placed on ever increasing inverter-interfaced DER installations and the challenges of utility network integration. This white book should also serve as a starting point for specifying DER protection testing requirements and procedures. A comprehensive review of international DER protection practices, standards and recommendations is presented. This is accompanied by the identifi cation of the main performance challenges related to these protection schemes under varied network operational conditions and the nature of DER generator and interface technologies. Emphasis is placed on the importance of dynamic testing that can only be delivered through laboratory-based platforms such as real-time simulators, integrated substation automation infrastructure and fl exible, inverter-equipped testing microgrids. To this end, the combination of fl exible network operation and new DER technologies underlines the importance of utilising the laboratory testing facilities available within the DERlab Network of Excellence. This not only informs the shaping of new protection testing and network integration practices by end users but also enables the process of de-risking new DER protection technologies. In order to support the issues discussed in the white paper, a comparative case study between UK and German DER protection and scheme testing practices is presented. This also highlights the level of complexity associated with standardisation and approval mechanisms adopted by different countries

Electric Power System Operations with a Variable Series Reactor

Series FACTS devices, such as a Variable Series Reactor (VSR), have the ability to continuously regulate the transmission line reactance so as to control power ow. This research work evaluates the benefits brought by VSRs in different aspects of power system and develops efficient planning models and algorithms to provide optimal investment plan for the VSRs. First, an optimization approach capable of finding both optimal locations and settings of VSRs under a specific operating condition is developed. The tool implements a full ac model as well as detailed models for different power system components. Second, an optimization tool which can optimally allocate VSRs to improve the load margin in a transmission network considering a multi-scenario framework including base case and some critical contingencies is proposed. Starting from a mixed integer nonlinear programming (MINLP) model, a reformulation technique is leveraged to transform the MINLP model into a mixed integer linear programming (MILP) model so that it is computationally tractable for large scale power systems. Detailed numerical simulations on the practical Northwest US power network demonstrate the proposed technique and the capability of VSRs. Third, the VSR is introduced in the Transmission Expansion Planning (TEP) problem. A security constrained multi-stage TEP with the VSR is formulated as an MILP model. To reduce the computational burden for a practical large scale system, a decomposition approach is proposed. Simulation results demonstrate the effectiveness of the proposed approach and show that the appropriately allocated VSRs allow reduced planning costs. Fourth, in order to investigate the economic benefits brought by VSR in contingencies, a planning model to allocate VSR considering different operating conditions and the N - 1 contingencies is formulated. We consider a single target year planning. Three distinct load patterns which represent peak, normal and low load level are selected to accommodate the yearly load profile. The transmission contingencies can occur in any of the three load conditions. A two phase Benders decomposition is proposed to solved the large scale MILP model. Simulation results on the IEEE-118 bus system and the practical Polish system establish the efficient performance of the proposed algorithm

Evolution of microgrids with converter-interfaced generations: Challenges and opportunities

© 2019 Elsevier Ltd Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids

Resilience-driven planning and operation of networked microgrids featuring decentralisation and flexibility

High-impact and low-probability extreme events including both man-made events and natural weather events can cause severe damage to power systems. These events are typically rare but featured in long duration and large scale. Many research efforts have been conducted on the resilience enhancement of modern power systems. In recent years, microgrids (MGs) with distributed energy resources (DERs) including both conventional generation resources and renewable energy sources provide a viable solution for the resilience enhancement of such multi-energy systems during extreme events. More specifically, several islanded MGs after extreme events can be connected with each other as a cluster, which has the advantage of significantly reducing load shedding through energy sharing among them. On the other hand, mobile power sources (MPSs) such as mobile energy storage systems (MESSs), electric vehicles (EVs), and mobile emergency generators (MEGs) have been gradually deployed in current energy systems for resilience enhancement due to their significant advantages on mobility and flexibility. Given such a context, a literature review on resilience-driven planning and operation problems featuring MGs is presented in detail, while research limitations are summarised briefly. Then, this thesis investigates how to develop appropriate planning and operation models for the resilience enhancement of networked MGs via different types of DERs (e.g., MGs, ESSs, EVs, MESSs, etc.). This research is conducted in the following application scenarios: 1. This thesis proposes novel operation strategies for hybrid AC/DC MGs and networked MGs towards resilience enhancement. Three modelling approaches including centralised control, hierarchical control, and distributed control have been applied to formulate the proposed operation problems. A detailed non-linear AC OPF algorithm is employed to model each MG capturing all the network and technical constraints relating to stability properties (e.g., voltage limits, active and reactive power flow limits, and power losses), while uncertainties associated with renewable energy sources and load profiles are incorporated into the proposed models via stochastic programming. Impacts of limited generation resources, load distinction intro critical and non-critical, and severe contingencies (e.g., multiple line outages) are appropriately captured to mimic a realistic scenario. 2. This thesis introduces MPSs (e.g., EVs and MESSs) into the suggested networked MGs against the severe contingencies caused by extreme events. Specifically, time-coupled routing and scheduling characteristics of MPSs inside each MG are modelled to reduce load shedding when large damage is caused to each MG during extreme events. Both transportation networks and power networks are considered in the proposed models, while transporting time of MPSs between different transportation nodes is also appropriately captured. 3. This thesis focuses on developing realistic planning models for the optimal sizing problem of networked MGs capturing a trade-off between resilience and cost, while both internal uncertainties and external contingencies are considered in the suggested three-level planning model. Additionally, a resilience-driven planning model is developed to solve the coupled optimal sizing and pre-positioning problem of MESSs in the context of decentralised networked MGs. Internal uncertainties are captured in the model via stochastic programming, while external contingencies are included through the three-level structure. 4. This thesis investigates the application of artificial intelligence techniques to power system operations. Specifically, a model-free multi-agent reinforcement learning (MARL) approach is proposed for the coordinated routing and scheduling problem of multiple MESSs towards resilience enhancement. The parameterized double deep Q-network method (P-DDQN) is employed to capture a hybrid policy including both discrete and continuous actions. A coupled power-transportation network featuring a linearised AC OPF algorithm is realised as the environment, while uncertainties associated with renewable energy sources, load profiles, line outages, and traffic volumes are incorporated into the proposed data-driven approach through the learning procedure.Open Acces

Investigation of novel methodologies using reactive power reserves for online voltage stability margin monitoring and control

As the amount of uncertainty in online power system operations grows, new methodologies need to be devised in order to timely monitor and control the power grid. In this work, novel techniques for online voltage stability margin monitoring and control have been developed with a focus on reactive power reserves. The maintenance of adequate reactive power reserves (RPRs) is a critical step in avoiding a voltage collapse. A thorough investigation of the relationship between different definitions of reactive power reserves and how they are related to voltage stability margin (VSM) is performed. Multi-linear regression models are used to relate RPRs and VSM. Several operating conditions and a significantly large number of different network topologies, including NERC category B, C and D outages are considered as well. A classification tool is then developed in order to identify which regression model needs to be used based on system conditions and network topology. The approach is tested in the IEEE 30 bus test system and in a reduced case of the eastern power system interconnection of the United States. Results have shown that the approach can monitor voltage stability margin in real time based on the amount of system wide reactive power reserves. In case degenerative system conditions are identified, control actions need to be put in place to increase the amount of RPRs and system VSM. A novel control method is proposed here in order to identify the location and amount of control necessary to recover RPRs, VSM and to remove existing voltage violations. The approach is based on the identification of a critical set of generators that, if exhausted, will directly contribute to a voltage collapse. Potential control actions are investigated in order to recover those critical reactive power reserves, namely: active power re-dispatch, capacitor switching, active and reactive power load shedding. The effectiveness of each control variables on RPRs is calculated using reactive power reserve sensitivities, a concept introduced in this work. Once these sensitivities are calculated, the problem of recovering RPRs and VSM is formulated as convex quadratic optimization problem with a reduced dimension. Results on the IEEE 30 bus test system and the IEEE 118 bus test system are used to illustrate the efficacy of the approach