Grasping Strategy and Control Algorithm of Two Robotic Fingers Equipped with Optical Three-Axis Tactile Sensors

AbstractThis paper presents grasping strategy of robot fingers based on tactile sensing information acquired by optical three-axis tactile sensor. We developed a novel optical three-axis tactile sensor system based on an optical waveguide transduction method capable of acquiring normal and shearing forces. The sensors are mounted on fingertips of two robotic fingers. To enhance the ability of recognizing and manipulating objects, we designed the robot control system architecture comprised of connection module, thinking routines, and a hand/finger control modules. We proposed tactile sensing-based control algorithm in the robot finger control system to control fingertips movements by defining optimum grasp pressure and perform re-push movement when slippage was detected. Verification experiments were conducted whose results revealed that the finger's system managed to recognize the stiffness of unknown objects and complied with sudden changes of the object's weight during object manipulation tasks

Object grasping and safe manipulation using friction-based sensing.

This project provides a solution for slippage prevention in industrial robotic grippers for the purpose of safe object manipulation. Slippage sensing is performed using novel friction-based sensors, with customisable slippage sensitivity and complemented by an effective slippage prediction strategy. The outcome is a reliable and affordable slippage prevention technology

Nonlinear control strategy for a cost effective myoelectric prosthetic hand

The loss of a limb tremendously impacts the life of the affected individual. In the past decades, researchers have been developing artificial limbs that may return some of the missing functions and cosmetics. However, the development of dexterous mechanisms capable of mimicking the function of the human hand is a complex venture. Even though myoelectric prostheses have advanced, several issues remain to be solved before an artificial limb may be comparable to its human counterpart. Moreover, the high cost of advanced limbs prevents their widespread use among the low-income population. This dissertation presents a strategy for the low-level of control of a cost effective robotic hand for prosthetic applications. The main purpose of this work is to reduce the high cost associated with limb replacement. The presented strategy uses an electromyographic signal classifier, which detects user intent by classifying 4 different wrist movements. This information is supplied as 4 different pre-shapes of the robotic hand to the low-level of control for safely and effectively performing the grasping tasks. Two proof-of-concept prototypes were implemented, consisting on five-finger underactuated hands driven by inexpensive DC motors and equipped with low-cost sensors. To overcome the limitations and nonlinearities of inexpensive components, a multi-stage control methodology was designed for modulating the grasping force based on slippage detection and nonlinear force control. A multi-stage control methodology for modulating the grasping force based on slippage detection and nonlinear force control was designed. The two main stages of the control strategy are the force control stage and the detection stage. The control strategy uses the force control stage to maintain a constant level of force over the object. The results of the experiments performed over this stage showed a rising time of less than 1 second, force overshoot of less than 1 N and steady state error of less than 0.15 N. The detection stage is used to monitor any sliding of the object from the hand. The experiments performed over this stage demonstrated a delay in the slip detection process of less than 200 milliseconds. The initial force, and the amount of force incremented after sliding is detected, were adjusted to reduce object displacement. Experiments were then performed to test the control strategy on situations often encountered in the ADL. The results showed that the control strategy was able to detect the dynamic changes in mass of the object and to successfully adjust the grasping force to prevent the object from dropping. The evaluation of the proposed control strategy suggests that this methodology can overcome the limitation of inexpensive sensors and actuators. Therefore, this control strategy may reduce the cost of current myoelectric prosthesis. We believe that the work presented here is a major step towards the development of a cost effective myoelectric prosthetic hand

Objekt-Manipulation und Steuerung der Greifkraft durch Verwendung von Taktilen Sensoren

This dissertation describes a new type of tactile sensor and an improved version of the dynamic tactile sensing approach that can provide a regularly updated and accurate estimate of minimum applied forces for use in the control of gripper manipulation. The pre-slip sensing algorithm is proposed and implemented into two-finger robot gripper. An algorithm that can discriminate between types of contact surface and recognize objects at the contact stage is also proposed. A technique for recognizing objects using tactile sensor arrays, and a method based on the quadric surface parameter for classifying grasped objects is described. Tactile arrays can recognize surface types on contact, making it possible for a tactile system to recognize translation, rotation, and scaling of an object independently.Diese Dissertation beschreibt eine neue Art von taktilen Sensoren und einen verbesserten Ansatz zur dynamischen Erfassung von taktilen daten, der in regelmäßigen Zeitabständen eine genaue Bewertung der minimalen Greifkraft liefert, die zur Steuerung des Greifers nötig ist. Ein Berechnungsverfahren zur Voraussage des Schlupfs, das in einen Zwei-Finger-Greifarm eines Roboters eingebaut wurde, wird vorgestellt. Auch ein Algorithmus zur Unterscheidung von verschiedenen Oberflächenarten und zur Erkennung von Objektformen bei der Berührung wird vorgestellt. Ein Verfahren zur Objekterkennung mit Hilfe einer Matrix aus taktilen Sensoren und eine Methode zur Klassifikation ergriffener Objekte, basierend auf den Daten einer rechteckigen Oberfläche, werden beschrieben. Mit Hilfe dieser Matrix können unter schiedliche Arten von Oberflächen bei Berührung erkannt werden, was es für das Tastsystem möglich macht, Verschiebung, Drehung und Größe eines Objektes unabhängig voneinander zu erkennen

3D Printed Prosthetic Robot Arm with Grasping Detection System for Children

Prosthetic robot arms have been an alternative replacement for upper limb-related disability, especially among children as it helps them perform regular activities such as holding tools, eating, and drinking. This research aims to develop a 3D prosthetic robot arm using SolidWorks and 3D printer, using a low-cost and straightforward mechanism for children. This paper proposes a close loop control system with position control for the prosthetic robot arm to achieve an appropriate grasping force focusing on solid-shaped objects using PID control. The PID controller controls the system's response to perform in the most efficient path. Force-sensitive resistors (FSR) are attached to all fingers to measure the grasping force acting on objects with different surfaces, dimensions, and weights. The controller results showed improvement in the overshoot percentage of 0.902%, as overshoot is essential in preventing the grasped object's deformations. The analysis of the experiment shows that the mean grasping force and static coefficient friction of each object are different regardless of the material the object is made of and the object's mass. For example, a cube-shaped object made of wood requires 0.5288 N of grasping force to grasp the object firmly compared to a plastic-made cube that only requires 0.3245 N to hold the cube. On the other hand, the static coefficient friction for the wood cube is 3.1708 and 0.4725 for the plastic cube. Further research can be done by designing the prosthetic robot arm with independent motorized and multi-degree movement of fingers

Robotic Manipulation of Environmentally Constrained Objects Using Underactuated Hands

Robotics for agriculture represents the ultimate application of one of our society\u27s latest and most advanced innovations to its most ancient and vital industry. Over the course of history, mechanization and automation have increased crop output several orders of magnitude, enabling a geometric growth in population and an increase in quality of life across the globe. As a challenging step, manipulating objects in harvesting automation is still under investigation in literature. Harvesting or the process of gathering ripe crops can be described as breaking environmentally constrained objects into two or more pieces at the desired locations. In this thesis, the problem of purposefully failing (breaking) or yielding objects by a robotic gripper is investigated. A failure task is first formulated using mechanical failure theories. Next, a grasp quality measure is presented to characterize a suitable grasp configuration and systematically control the failure behavior of the object. This approach combines the failure task and the capability of the gripper for wrench insertion. The friction between the object and the gripper is used to formulate the capability of the gripper for wrench insertion. A new method inspired by the human pre-manipulation process is introduced to utilize the gripper itself as the measurement tool and obtain a friction model. The developed friction model is capable of capturing the anisotropic behavior of materials which is the case for most fruits and vegetables.The limited operating space for harvesting process, the vulnerability of agricultural products and clusters of crops demand strict conditions for the manipulation process. This thesis presents a new sensorized underactuated self-adaptive finger to address the stringent conditions in the agricultural environment. This design incorporates link-driven underactuated mechanism with an embedded load cell for contact force measurement and a trimmer potentiometer for acquiring joint variables. The integration of these sensors results in tactile-like sensations in the finger without compromising the size and complexity of the proposed design. To obtain an optimum finger design, the placement of the load cell is analyzed using Finite Element Method (FEM). The design of the finger features a particular round shape of the distal phalanx and specific size ratio between the phalanxes to enable both precision and power grasps. A quantitative evaluation of the grasp efficiency by constructing a grasp wrench space is also provided. The effectiveness of the proposed designs and theories are verified through real-time experiments. For conducting the experiments in real-time, a software/hardware platform capable of dataset management is crucial. In this thesis, a new comprehensive software interface for integration of industrial robots with peripheral tools and sensors is designed and developed. This software provides a real-time low-level access to the manipulator controller. Furthermore, Data Acquisition boards are integrated into the software which enables Rapid Prototyping methods. Additionally, Hardware-in-the-loop techniques can be implemented by adding the complexity of the plant under control to the test platform. The software is a collection of features developed and distributed under GPL V3.0