Shortest Paths and Steiner Trees in VLSI Routing

Routing is one of the major steps in very-large-scale integration (VLSI) design. Its task is to find disjoint wire connections between sets of points on a chip, subject to numerous constraints. This problem is solved in a two-stage approach, which consists of so-called global and detailed routing steps. For each set of metal components to be connected, global routing reduces the search space by computing corridors in which detailed routing sequentially determines the desired connections as shortest paths. In this thesis, we present new theoretical results on Steiner trees and shortest paths, the two main mathematical concepts in routing. In the practical part, we give computational results of BonnRoute, a VLSI routing tool developed at the Research Institute for Discrete Mathematics at the University of Bonn. Interconnect signal delays are becoming increasingly important in modern chip designs. Therefore, the length of paths or direct delay measures should be taken into account when constructing rectilinear Steiner trees. We consider the problem of finding a rectilinear Steiner minimum tree (RSMT) that --- as a secondary objective --- minimizes a signal delay related objective. Given a source we derive some structural properties of RSMTs for which the weighted sum of path lengths from the source to the other terminals is minimized. Also, we present an exact algorithm for constructing RSMTs with weighted sum of path lengths as secondary objective, and a heuristic for various secondary objectives. Computational results for industrial designs are presented. We further consider the problem of finding a shortest rectilinear Steiner tree in the plane in the presence of rectilinear obstacles. The Steiner tree is allowed to run over obstacles; however, if it intersects an obstacle, then no connected component of the induced subtree must be longer than a given fixed length. This kind of length restriction is motivated by its application in VLSI routing where a large Steiner tree requires the insertion of repeaters which must not be placed on top of obstacles. We show that there are optimal length-restricted Steiner trees with a special structure. In particular, we prove that a certain graph (called augmented Hanan grid) always contains an optimal solution. Based on this structural result, we give an approximation scheme for the special case that all obstacles are of rectangular shape or are represented by at most a constant number of edges. Turning to the shortest paths problem, we present a new generic framework for Dijkstra's algorithm for finding shortest paths in digraphs with non-negative integral edge lengths. Instead of labeling individual vertices, we label subgraphs which partition the given graph. Much better running times can be achieved if the number of involved subgraphs is small compared to the order of the original graph and the shortest path problems restricted to these subgraphs is computationally easy. As an application we consider the VLSI routing problem, where we need to find millions of shortest paths in partial grid graphs with billions of vertices. Here, the algorithm can be applied twice, once in a coarse abstraction (where the labeled subgraphs are rectangles), and once in a detailed model (where the labeled subgraphs are intervals). Using the result of the first algorithm to speed up the second one via goal-oriented techniques leads to considerably reduced running time. We illustrate this with the routing program BonnRoute on leading-edge industrial chips. Finally, we present computational results of BonnRoute obtained on real-world VLSI chips. BonnRoute fulfills all requirements of modern VLSI routing and has been used by IBM and its customers over many years to produce more than one thousand different chips. To demonstrate the strength of BonnRoute as a state-of-the-art industrial routing tool, we show that it performs excellently on all traditional quality measures such as wire length and number of vias, but also on further criteria of equal importance in the every-day work of the designer

Flow-based Partitioning and Fast Global Placement in Chip Design

VLSI placement is one of the major steps in the chip design process and an interesting subject of research in industry and academia. Recent chips consist of several millions of circuits connected by millions of nets. The classical placement objective of finding positions for circuits and minimizing netlength among them is an ongoing issue in optimization of chip performance. The increasing instance sizes, the tightness of timing and routability constraints impose a real challenge to the design flows and the designers, which often cannot be addressed properly without considering them explicitly within the placement. Many of the complex design methodologies follow an iterative approach, using placement several times in this process. Thus, placement runtime has a severe impact on the turnaround time in chip development. The major contributios of this thesis deal with the global placement, a common relaxation of the placement problem, which computes rough positions of the circuits minimizing the total length of wires to interconnect the. Based on the idea of subsequent quadratic netlength minimization and partitioning, as in BonnPlace [BrennerStruzynaVygen:2008], we present several new algorithms, generalized data structures and a completely new implementation of this top-down placement scheme. We introduce and formalize the concept of movebounds which are position constraints on subsets of cells. Movebounds, which can be regarded as mandatory or soft constraints, provide a mechanism to explicitly incorporate movement constraints to the placement which result from issues of timing, power and routability. With inclusive movebounds, such restrictions can be assigned to groups of circuits without any influence to other placeable objects. The other constraints, namely the exclusive movebounds, are of particular interest for semi-hierarchical approaches, as they can be used to obtain a flat view of the design and prevent cells from being placed into hierarchy units. Both provide a toolbox to the designer and allow the control of particular circuit sets without netlist manipulations. We also present a top-down partitioning scheme and extend the legalization algorithm of [BrennerVygen:2004] to be able to deal with millions of cells and dozens of movebounds efficiently. The presented algorithm can handle different types of overlapping movebounds, even in legalization, and produces significantly better results than a modern industrial tool. We present a novel partitioning algorithm for global placement. Unlike previous iterative and recursive approaches, the new method provides a global view of the problem using a novel MinCostFlow model with extremely fast and highly parallelizable local realization steps. The new flow-based partitioning can address density targets much more accurately and lowers the risk of density violations. The presented MinCostFlow model does not depend on the number of cells, making it highly interesting for large and huge designs. Moreover, the embedded flow structure responds to the chip's floorplan much better than the classical global partitioning approach. Another significant advantage of this algorithm is the fact that it can be applied to any initial placement and guarantees a feasible (fractional) solution (if one exists), improving the tool's reliability, even with movebounds and starting from placements with significant density violations. Using this method we can extend the congestion-driven placement to a combined movement, density adjustment, and cell size inflation approach. This method is able to handle movebounds and guarantees to resolve density overloads properly. Flow-based partitioning creates the opportunity of applying local, density unaware, optimization steps within global placement and allows it to break the strict recursive structure of levels and save runtime. The extended flexibility and runtime improvement are not the only advantages. The proposed flow realization, which is a combination of local quadratic programs and local partitioning, does not only yield a runtime improvement, but also seems to merge connectivity information to partitioning in a much better way than the old recursive partitioning approach. The new flow-based partitioning helps to significantly improve the results of our placement also in terms of netlength. We provide fast data structures for hierarchically clustered netlists and extend the net models Clique and Star to be applied within the clustered netlists efficiently. We show how shared-memory parallelization can be used for speeding up various routines in placement, without the loss of repeatability. In addition, we commit ourselves to the clustering problem, finding circuit groups which should be placed in the vicinity of each other. In order to provide global information for a fast bottom-up clustering, we propose to incorporate connectivity information using random walks. To this end, we show how the hitting times can be efficiently retrieved from large netlist hypergraphs. Due to the proposed model, parallel computation on sparse, shared-memory matrices can be used for computing hitting times to several targets simultaneously. Combined with a bottom-up clustering, even our preliminary approach significantly outperforms the popular BestChoice} algorithm [Nam et al. 2005]. We conclude this thesis by providing several experimental results on a large testbed of real-world chips and benchmarks demonstrating the performance of our tool. Without movebounds, our tool performs as good as a state-of-the-art force directed placer, but is more than 5x faster. We achieve the same speedup over the old BonnPlace, but produce significantly better results, on average more than 8%. With movebounds, our placements are more than 30% shorter compairing to the force-directed placer and our tool is 9x-20x faster. Our tool also produces the best results on the latest ISPD 2006 placement benchmarks

Timing Closure in Chip Design

Achieving timing closure is a major challenge to the physical design of a computer chip. Its task is to find a physical realization fulfilling the speed specifications. In this thesis, we propose new algorithms for the key tasks of performance optimization, namely repeater tree construction; circuit sizing; clock skew scheduling; threshold voltage optimization and plane assignment. Furthermore, a new program flow for timing closure is developed that integrates these algorithms with placement and clocktree construction. For repeater tree construction a new algorithm for computing topologies, which are later filled with repeaters, is presented. To this end, we propose a new delay model for topologies that not only accounts for the path lengths, as existing approaches do, but also for the number of bifurcations on a path, which introduce extra capacitance and thereby delay. In the extreme cases of pure power optimization and pure delay optimization the optimum topologies regarding our delay model are minimum Steiner trees and alphabetic code trees with the shortest possible path lengths. We presented a new, extremely fast algorithm that scales seamlessly between the two opposite objectives. For special cases, we prove the optimality of our algorithm. The efficiency and effectiveness in practice is demonstrated by comprehensive experimental results. The task of circuit sizing is to assign millions of small elementary logic circuits to elements from a discrete set of logically equivalent, predefined physical layouts such that power consumption is minimized and all signal paths are sufficiently fast. In this thesis we develop a fast heuristic approach for global circuit sizing, followed by a local search into a local optimum. Our algorithms use, in contrast to existing approaches, the available discrete layout choices and accurate delay models with slew propagation. The global approach iteratively assigns slew targets to all source pins of the chip and chooses a discrete layout of minimum size preserving the slew targets. In comprehensive experiments on real instances, we demonstrate that the worst path delay is within 7% of its lower bound on average after a few iterations. The subsequent local search reduces this gap to 2% on average. Combining global and local sizing we are able to size more than 5.7 million circuits within 3 hours. For the clock skew scheduling problem we develop the first algorithm with a strongly polynomial running time for the cycle time minimization in the presence of different cycle times and multi-cycle paths. In practice, an iterative local search method is much more efficient. We prove that this iterative method maximizes the worst slack, even when restricting the feasible schedule to certain time intervals. Furthermore, we enhance the iterative local approach to determine a lexicographically optimum slack distribution. The clock skew scheduling problem is then generalized to allow for simultaneous data path optimization. In fact, this is a time-cost tradeoff problem. We developed the first combinatorial algorithm for computing time-cost tradeoff curves in graphs that may contain cycles. Starting from the lowest-cost solution, the algorithm iteratively computes a descent direction by a minimum cost flow computation. The maximum feasible step length is then determined by a minimum ratio cycle computation. This approach can be used in chip design for several optimization tasks, e.g. threshold voltage optimization or plane assignment. Finally, the optimization routines are combined into a timing closure flow. Here, the global placement is alternated with global performance optimization. Netweights are used to penalize the length of critical nets during placement. After the global phase, the performance is improved further by applying more comprehensive optimization routines on the most critical paths. In the end, the clock schedule is optimized and clocktrees are inserted. Computational results of the design flow are obtained on real-world computer chips

Proceedings of the 8th Cologne-Twente Workshop on Graphs and Combinatorial Optimization

International audienceThe Cologne-Twente Workshop (CTW) on Graphs and Combinatorial Optimization started off as a series of workshops organized bi-annually by either Köln University or Twente University. As its importance grew over time, it re-centered its geographical focus by including northern Italy (CTW04 in Menaggio, on the lake Como and CTW08 in Gargnano, on the Garda lake). This year, CTW (in its eighth edition) will be staged in France for the first time: more precisely in the heart of Paris, at the Conservatoire National d’Arts et Métiers (CNAM), between 2nd and 4th June 2009, by a mixed organizing committee with members from LIX, Ecole Polytechnique and CEDRIC, CNAM

Timing-Constrained Global Routing with Buffered Steiner Trees

This dissertation deals with the combination of two key problems that arise in the physical design of computer chips: global routing and buffering. The task of buffering is the insertion of buffers and inverters into the chip's netlist to speed-up signal delays and to improve electrical properties of the chip. Insertion of buffers and inverters goes alongside with construction of Steiner trees that connect logical sources with possibly many logical sinks and have buffers and inverters as parts of these connections. Classical global routing focuses on packing Steiner trees within the limited routing space. Buffering and global routing have been solved separately in the past. In this thesis we overcome the limitations of the classical approaches by considering the buffering problem as a global, multi-objective problem. We study its theoretical aspects and propose algorithms which we implement in the tool BonnRouteBuffer for timing-constrained global routing with buffered Steiner trees. At its core, we propose a new theoretically founded framework to model timing constraints inherently within global routing. As most important sub-task we have to compute a buffered Steiner tree for a single net minimizing the sum of prices for delays, routing congestion, placement congestion, power consumption, and net length. For this sub-task we present a fully polynomial time approximation scheme to compute an almost-cheapest Steiner tree with a given routing topology and prove that an exact algorithm cannot exist unless P=NP. For topology computation we present a bicriteria approximation algorithm that bounds both the geometric length and the worst slack of the topology. To improve the practical results we present many heuristic modifications, speed-up- and post-optimization techniques for buffered Steiner trees. We conduct experiments on challenging real-world test cases provided by our cooperation partner IBM to demonstrate the quality of our tool. Our new algorithm could produce better solutions with respect to both timing and routability. After post-processing with gate sizing and Vt-assignment, we can even reduce the power consumption on most instances. Overall, our results show that our tool BonnRouteBuffer for timing-constrained global routing is superior to industrial state-of-the-art tools

Timing-Constrained Global Routing with RC-Aware Steiner Trees and Routing Based Optimization

In this thesis we consider the global routing problem, which arises as one of the major subproblems in the physical design step in VLSI design. In global routing, we are given a three-dimensional grid graph G with edge capacities representing available routing space, and we have to connect a set of nets in G without overusing any edge capacities. Here, each net consists of a set of pins corresponding to vertices of G, where one pin is the sender of signals, while all other pins are receivers. Traditionally, next to obeying all edge capacity constraints, the objective has been to minimize wire length and possibly via (edges in z-direction) count, and timing constraints on the chip were only modeled indirectly. We present a new approach, where timing constraints are modeled directly during global routing: In joint work with Stephan Held, Dirk Mueller, Daniel Rotter, Vera Traub and Jens Vygen, we extend the modeling of global routing as a Min-Max Resource Sharing Problem to also incorporate timing constraints. For measuring signal delays we use the well-established Elmore delay model. One of the key subproblems here is the computation of Steiner trees minimizing a weighted sum of routing space usages and signal delays. For k pins, this problem is NP-hard to approximate within o(log k), and even the special case k = 2 is NP-hard, as was shown by Haehnle and Rotter. We present a fast approximation algorithm with strong approximation bounds for the case k = 2. For k > 2 we use a multi-stage approach based on modifying the topology of a short Steiner tree and using our algorithm for the two-pin case for computing new connections. Moreover, we present a layer assignment algorithm that assigns z-coordinates to the edges of a given two-dimensional tree. We also discuss the topic of routing based optimization. Here, the starting point is a complete routing, and timing optimization tools make changes that require incremental adaptations of the underlying routing. We investigate several aspects of this problem and derive a new routing flow that includes our timing-aware global router and routing based optimization steps. We evaluate our results from this thesis in practice on industrial 14nm microprocessor designs from IBM. Our theoretical results are validated in practice by a strong performance of our timing-aware global routing framework and our new routing flow, yielding significant improvements over the traditional global routing method and the previously used routing flow. Therefore, we conclude that our approaches and results from this thesis are not only theoretically sound but also give compelling results in practice

Analog design for manufacturability: lithography-aware analog layout retargeting

As transistor sizes shrink over time in the advanced nanometer technologies, lithography effects have become a dominant contributor of integrated circuit (IC) yield degradation. Random manufacturing variations, such as photolithographic defect or spot defect, may cause fatal functional failures, while systematic process variations, such as dose fluctuation and defocus, can result in wafer pattern distortions and in turn ruin circuit performance. This dissertation is focused on yield optimization at the circuit design stage or so-called design for manufacturability (DFM) with respect to analog ICs, which has not yet been sufficiently addressed by traditional DFM solutions. On top of a graph-based analog layout retargeting framework, in this dissertation the photolithographic defects and lithography process variations are alleviated by geometrical layout manipulation operations including wire widening, wire shifting, process variation band (PV-band) shifting, and optical proximity correction (OPC). The ultimate objective of this research is to develop efficient algorithms and methodologies in order to achieve lithography-robust analog IC layout design without circuit performance degradation

High-performance Global Routing for Trillion-gate Systems-on-Chips.

Due to aggressive transistor scaling, modern-day CMOS circuits have continually increased in both complexity and productivity. Modern semiconductor designs have narrower and more resistive wires, thereby shifting the performance bottleneck to interconnect delay. These trends considerably impact timing closure and call for improvements in high-performance physical design tools to keep pace with the current state of IC innovation. As leading-edge designs may incorporate tens of millions of gates, algorithm and software scalability are crucial to achieving reasonable turnaround time. Moreover, with decreasing device sizes, optimizing traditional objectives is no longer sufficient. Our research focuses on (i) expanding the capabilities of standalone global routing, (ii) extending global routing for use in different design applications, and (iii) integrating routing within broader physical design optimizations and flows, e.g., congestion-driven placement. Our first global router relies on integer-linear programming (ILP), and can solve fairly large problem instances to optimality. Our second iterative global router relies on Lagrangian relaxation, where we relax the routing violation constraints to allowing routing overflow at a penalty. In both approaches, our desire is to give the router the maximum degree of freedom within a specified context. Empirically, both routers produce competitive results within a reasonable amount of runtime. To improve routability, we explore the incorporation of routing with placement, where the router estimates congestion and feeds this information to the placer. In turn, the emphasis on runtime is heightened, as the router will be invoked multiple times. Empirically, our placement-and-route framework significantly improves the final solution’s routability than performing the steps sequentially. To further enhance routability-driven placement, we (i) leverage incrementality to generate fast and accurate congestion maps, and (ii) develop several techniques to relieve cell-based and layout-based congestion. To broaden the scope of routing, we integrate a global router in a chip-design flow that addresses the buffer explosion problem.PHDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/98025/1/jinhu_1.pd

High-Performance Placement and Routing for the Nanometer Scale.

Modern semiconductor manufacturing facilitates single-chip electronic systems that only five years ago required ten to twenty chips. Naturally, design complexity has grown within this period. In contrast to this growth, it is becoming common in the industry to limit design team size which places a heavier burden on design automation tools. Our work identifies new objectives, constraints and concerns in the physical design of systems-on-chip, and develops new computational techniques to address them. In addition to faster and more relevant design optimizations, we demonstrate that traditional design flows based on ``separation of concerns'' produce unnecessarily suboptimal layouts. We develop new integrated optimizations that streamline traditional chains of loosely-linked design tools. In particular, we bridge the gap between mixed-size placement and routing by updating the objective of global and detail placement to a more accurate estimate of routed wirelength. To this we add sophisticated whitespace allocation, and the combination provides increased routability, faster routing, shorter routed wirelength, and the best via counts of published techniques. To further improve post-routing design metrics, we present new global routing techniques based on Discrete Lagrange Multipliers (DLM) which produce the best routed wirelength results on recent benchmarks. Our work culminates in the integration of our routing techniques within an incremental placement flow to improve detailed routing solutions, shrink die sizes and reduce total chip cost. Not only do our techniques improve the quality and cost of designs, but also simplify design automation software implementation in many cases. Ultimately, we reduce the time needed for design closure through improved tool fidelity and the use of our incremental techniques for placement and routing.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64639/1/royj_1.pd