43 research outputs found
Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks
By taking a variety of realistic hardware imperfections into consideration,
we propose an optimal power allocation (OPA) strategy to maximize the
instantaneous secrecy rate of a cooperative wireless network comprised of a
source, a destination and an untrusted amplify-and-forward (AF) relay. We
assume that either the source or the destination is equipped with a large-scale
multiple antennas (LSMA) system, while the rest are equipped with a single
antenna. To prevent the untrusted relay from intercepting the source message,
the destination sends an intended jamming noise to the relay, which is referred
to as destination-based cooperative jamming (DBCJ). Given this system model,
novel closed-form expressions are presented in the high signal-to-noise ratio
(SNR) regime for the ergodic secrecy rate (ESR) and the secrecy outage
probability (SOP). We further improve the secrecy performance of the system by
optimizing the associated hardware design. The results reveal that by
beneficially distributing the tolerable hardware imperfections across the
transmission and reception radio-frequency (RF) front ends of each node, the
system's secrecy rate may be improved. The engineering insight is that equally
sharing the total imperfections at the relay between the transmitter and the
receiver provides the best secrecy performance. Numerical results illustrate
that the proposed OPA together with the most appropriate hardware design
significantly increases the secrecy rate.Comment: 29 pages, 7 figures, Submitted to IEEE Transactions on Wireless
Communication
Secure Two-Way Transmission via Wireless-Powered Untrusted Relay and External Jammer
In this paper, we propose a two-way secure communication scheme where two
transceivers exchange confidential messages via a wireless powered untrusted
amplify-and-forward (AF) relay in the presence of an external jammer. We take
into account both friendly jamming (FJ) and Gaussian noise jamming (GNJ)
scenarios. Based on the time switching (TS) architecture at the relay, the data
transmission is done in three phases. In the first phase, both the
energy-starved nodes, the untrustworthy relay and the jammer, are charged by
non-information radio frequency (RF) signals from the sources. In the second
phase, the two sources send their information signals and concurrently, the
jammer transmits artificial noise to confuse the curious relay. Finally, the
third phase is dedicated to forward a scaled version of the received signal
from the relay to the sources. For the proposed secure transmission schemes, we
derive new closed-form lower-bound expressions for the ergodic secrecy sum rate
(ESSR) in the high signal-to-noise ratio (SNR) regime. We further analyze the
asymptotic ESSR to determine the key parameters; the high SNR slope and the
high SNR power offset of the jamming based scenarios. To highlight the
performance advantage of the proposed FJ, we also examine the scenario of
without jamming (WoJ). Finally, numerical examples and discussions are provided
to acquire some engineering insights, and to demonstrate the impacts of
different system parameters on the secrecy performance of the considered
communication scenarios. The numerical results illustrate that the proposed FJ
significantly outperforms the traditional one-way communication and the
Constellation rotation approach, as well as our proposed benchmarks, the
two-way WoJ and GNJ scenarios.Comment: 14 pages, 6 figures, Submitted to IEEE Transactions on Vehicular
Technolog
Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks
CCBY By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination and an untrusted amplify-and-forward (AF) relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas (LSMA) system, while the rest are equipped with a single-antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming (DBCJ). Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio (SNR) regime for the ergodic secrecy rate (ESR) and the secrecy outage probability (SOP). We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency (RF) front ends of each node, the system & #x2019;s secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
Secrecy Enhancement in Cooperative Relaying Systems
Cooperative communications is obviously an evolution in wireless networks due to its noticeable advantages such as increasing the coverage as well as combating fading and shadowing effects. However, the broadcast characteristic of a wireless medium which is exploited in cooperative communications leads to a variety of security vulnerabilities. As cooperative communication networks are globally expanded, they expose to security attacks and threats more than ever. Primarily, researchers have focused on upper layers of network architectures to meet the requirements for secure cooperative transmission while the upper-layer security solutions are incapable of combating a number of security threats, e.g., jamming attacks. To address this issue, physical-layer security has been recommended as a complementary solution in the literature. In this thesis, physical layer attacks of the cooperative communication systems are studied, and corresponding security techniques including cooperative jamming, beamforming and diversity approaches are investigated. In addition, a novel security solution for a two-hop decode-and-forward relaying system is presented where the transmitters insert a random phase shift to the modulated data of each hop. The random phase shift is created based on a shared secret among communicating entities. Thus, the injected phase shift confuses the eavesdropper and secrecy capacity improves. Furthermore, a cooperative jamming strategy for multi-hop decode-and-forward relaying systems is presented where multiple non-colluding illegitimate nodes can overhear the communication. The jamming signal is created by the transmitter of each hop while being sent with the primary signal. The jamming signal is known at the intended receiver as it is according to a secret common knowledge between the communicating entities. Hence, artificial noise misleads the eavesdroppers, and decreases their signal-to-noise-ratio. As a result, secrecy capacity of the system is improved. Finally, power allocation among friendly jamming and main signal is proposed to ensure that suggested scheme enhances secrecy
Physical layer security: friendly Jamming in an untrusted relay scenario
This paper investigates the achievable secrecy regions when employing a friendly jammer in a cooperative scenario employing an untrusted relay. The untrusted relay which helps to forward the source signal towards the destination, could also be regarded as a potential eavesdropper. Our system employs a friendly jammer which sends a known noise signal towards the relay. In this paper, we investigate the effect of jammer and relay locations on the achievable secrecy rate. We consider two scenarios where in the first case we consider no direct transmission between the source and destination, while in the second case we include a source to destination direct link in our communication system