5 research outputs found
Improving Capacity and Energy Efficiency of Femtocell Based Cellular Network Through Cell Biasing
Abstract-Future of cellular networks lies in heterogeneity. Heterogeneous cellular networks are characterized by overlay of low power nodes such as microcells, picocells, and femtocells along with traditional macrocell base stations. These nodes help operators to improve system capacity in cost effective manner while making the environment greener by reducing the carbon footprint. Research has shown that femtocells can be an effective solution to handle the increasing demands for indoor mobile traffic. However, low utilization of femtocell resources limits the gain obtained from their large scale deployment. Also, random placement of femtocells accumulate additional interference to macrocell users. In this paper, we introduce the concept of cell biasing for femtocells to improve user association and resource utilization. Our work analyses the effects of cell biasing on femtocell based cellular network and provides improvement in capacity and energy efficiency of the network through frequency reuse and subchannel power control. The obtained analytical results are verified through simulation
Application of fractional frequency reuse technique for cancellation of interference in heterogeneous cellular network
The continuously growing number of mobile devices in terms of hardware and applications augments the necessity for higher data rates and a larger capacity in wireless communication networks. The Long Term Evolution (LTE) standard was designed to provide these mobile users with a better throughput, coverage and a lower latency. This thesis studies a specific area in Heterogeneous Networks; the subject of femtocells. The aim of femtocells is to provide better indoor coverage so as to allow users to benefit from higher data rates while reducing the load on the macro cell. Femtocells were proposed for Long Term Evolution (LTE) for indoor coverage. It is achieved using access points by home users. However, co-channel interference is a serious issue with femtocells that may dramatically reduce the performance of femto and macrocells. The system capacity and throughput decreases. As femtocells use the same spectrum as the macrocells, and the femtocells are deployed without proper planning, interference from femtocells to macrocells becomes a major issue. In this thesis, the interference from femtocells to macrocells is studied and a solution for the mitigation of this kind of interference is suggested using FFR mechanism. In our proposed scheme for interference avoidance, femtocells use those frequency sub bands which are currently not being used within the macrocell, the process of assigning the frequency bands is based on FFR. The simulation results suggest that the suggested technique enhances total/edge throughputs, and optimizes the SINR and CDF of femtocells users (FUEs) and reduces the outage probability of the network
Review on Radio Resource Allocation Optimization in LTE/LTE-Advanced using Game Theory
Recently, there has been a growing trend toward ap-plying game theory (GT) to various engineering fields in order to solve optimization problems with different competing entities/con-tributors/players. Researches in the fourth generation (4G) wireless network field also exploited this advanced theory to overcome long term evolution (LTE) challenges such as resource allocation, which is one of the most important research topics. In fact, an efficient de-sign of resource allocation schemes is the key to higher performance. However, the standard does not specify the optimization approach to execute the radio resource management and therefore it was left open for studies. This paper presents a survey of the existing game theory based solution for 4G-LTE radio resource allocation problem and its optimization
Performance Enhancing of Heterogeneous Network through Optimisation and Machine Learning Techniques
In the last two decades, by the benefit of advanced wireless technology, growing data service cause the explosive traffic demand, and it brings many new challenges to the network operators. In order to match the growing traffic demand, operators shall deploy new base stations to increase the total cellular network capacity. Meanwhile, a new type of low-power base stations are frequently deployed within the network, providing extra access points to subscribers. However, even the new base station can be operated in low power, the total network energy consumption is still increased proportional to the total number of base station, and considerable network energy consumption will become one of the main issues to the network operators. The way of reducing network energy consumption become crucial, especially in 5G when multiple antennas are deployed within one site. However, the base station cannot be always operated in low power because it will damage the network performance, and power can be only reduced in light-traffic period. Therefore, the way of balancing traffic demand and energy consumption will be come the main investigation direction in this thesis, and how to link the operated power of base station to the current traffic demand is investigated. In this thesis, algorithms and optimisations are utilised to reduce the network energy consumption and improve the network performance.
To reduce the energy consumption in light-traffic period, base stations switch-off strategy is proposed in the first chapter. However, the network performance should be carefully estimated before the switch-off strategy is applied. The NP-hard energy efficiency optimisation problem is summarised, and it proposes the method that some of the base stations can be grouped together due to the limited interference from other Pico cells, reducing the complexity of the optimisation problem. Meanwhile, simulated annealing is proposed to obtain the optimal base stations combination to achieve optimal energy efficiency. By the optimisation algorithm, it can obtain the optimal PCs combination without scarifying the overall network throughput. The simulation results show that not only the energy consumption can be reduced but also the significant energy efficiency improvement can achieve by the switched-off strategy. The average energy efficiency improvement over thirty simulation is 17.06%.
The second chapter will tackle the issue of how to raise the power of base stations after they are switched off. These base stations shall back to regular power level to prepare the incoming traffic. However, not all base stations shall be back to normal power due to the uneven traffic distribution. By analysing the information within the collected subscriber data, such as moving speed, direction, downlink and time, Naive Bayesian classifier will be utilised to obtain the user movement pattern and predict the future traffic distribution, and the system can know which base station will become the user's destination. The load adaptive power control is utilised to inform the corresponding base stations to increased the transmission power, base stations can prepare for the incoming traffic, avoiding the performance degradation. The simulation results show that the machine learning can accurately predict the destination of the subscriber, achieving average 90.8% accuracy among thirty simulation. The network energy can be saved without damage the network performance after the load adaptive function is applied, the average energy efficiency improvement among three scenarios is 4.3%, the improvement is significant. The significant improvement prove that the proposed machine learning and load adaptive power modification method can help the network reduce the energy consumption.
In the last chapter, it will utilise cell range expansion to tackle the resources issue in cooperative base station in joint transmission, improving downlink performance and tackle the cell-edge problem. Due to the uneven traffic distribution, it will cause the insufficient resources problem in cooperative base station in joint transmission, and the system throughput will be influenced if cooperative base station executes joint transmission in high load. Therefore, the cell range expansion is utilised to solve the problem of unbalanced traffic between base station tier, and flow water algorithm is utilised to tackle the resources distribution issue during the traffic offloading. The simulation shows the NP-hard problem can be sufficiently solved by the flow water algorithm, and the downlink throughput gain can be obtained, it can obtain 26% gain in the M-P scenario, and the gain in P-M scenario is 24%. The result prove that the proposed method can provide significant gain to the subscriber without losing any total network throughput
Recommended from our members
Scalable base station switching framework for green cellular networks
With the recent unprecedented growth in the wireless market, network operators are obliged not only to find new techniques including dense deployment of base stations (BSs) in order to support high data rate services and high user density, but also to reduce the operating costs and energy consumption of various network elements. To solve these challenges, powering down certain BSs during low-traffic periods, so-called BS sleeping, has emerged as an effective green communications paradigm. While BS sleeping offers the potential to significantly lower energy consumption, it also raises many challenges, since when a BS is switched off, this can lead to, for example, coverage holes, sudden degradation in quality of service (QoS), higher transmit power dissipation in off-cell mobile stations (MSs), an inability to rapidly power up/down equipment and finally, a failure to uphold regulatory requirements. In order to realise greener network designs which both maximise energy savings whilst guaranteeing QoS, innovative BS switching mechanisms need to be developed.
This thesis presents a novel BS switching framework which improves energy efficiency (EE) in comparison with existing approaches, while guaranteeing the minimum QoS and seamless services. The major technical contributions in this framework are: i) a new BS to relay station (RS) switching model where certain BSs are switched to RS mode rather than being turned off, firstly using a fixed threshold based switching algorithm utilizing temporal traffic diversity, and ii) then subsequently by means of an adaptive threshold by exploiting the inherently asymmetric traffic profile between cells, i.e., by exploiting both the temporal and spatial traffic diversity; iii) a traffic-and-interference-aware BS switching strategy that considers the impact of inter-cell interference in the decision making process to dynamically determine the best BS set to be kept active for improved EE; and finally iv) a novel scalable multimode BS switching model which enables each BS to operate in different power modes i.e., macro/micro/sleep to explore energy savings potential even at higher traffic conditions.
The thesis findings conclusively confirm this new BS switching framework provides significant EE improvements from both BS and MS perspectives, under diverse network conditions and represents a notable step towards greener communications