49,078 research outputs found
Optimal Power Distribution and Power Trading Control among Loads in a Smart Grid Operated Industry
Deployment of smart grid technology into the conventional grid system provides us the different benefits regarding the energy savings and solutions such as increased reliability, reduced functionality cost, empowerment to the green energy and improved overall efficiency of the grid system. The global infrastructure of electricity is perhaps the most complex network invented by men. And currently we are using the almost 50 years old technology when it comes to electrical grid system and distribution of electricity for an industrial plant. Considering the fact of increased global warming concern, it is very essential to replace this system with much advanced technology such as smart grid. An industrial plant with various operations consist of different kind of loads.Those loads are different to each other in terms of their load profile. Power usages for each load may vary from other loads depending upon the hours of the day. At peak hours of day when a situation of over loading occur, system is bound to control the over loading situation either by turning off the loads or by shifting the load to the other non-peak hours of the day. In this thesis we come with a solution of optimizing the cost of shutting down the required load without affecting the operation of the industrial plant. Categorizing the load according to their load profile and obtaining the optimal values of energy usage for next hour depending upon the same values of last week, we make a feasible and profitable solution by using optimal power flow control techniques. The risk of peak load is considerably removed when we simulate and analyse the output. Our objective here does not only remain to supply energy to the consumer but also allowing users to make an effort to create clean energy from their part by maintaining proper communication between the supplier and receiver and keeping all the relevant parameters such as energy reliability, load balance, system efficiency at optimal level
Optimal Energy Management of Distribution Systems and Industrial Energy Hubs in Smart Grids
Electric power distribution systems are gradually adopting new advancements in communication, control, measurement, and metering technologies to help realize the evolving concept of Smart Grids. Future distribution systems will facilitate increased and active participation of customers in Demand Side Management activities, with customer load profiles being primarily governed by real-time information such as energy price, emission, and incentive signals from utilities. In such an environment, new mathematical modeling approaches would allow Local Distribution Companies (LDCs) and customers the optimal operation of distribution systems and customer's loads, considering various relevant objectives and constraints.
This thesis presents a mathematical model for optimal and real-time operation of distribution systems. Thus, a three-phase Distribution Optimal Power Flow (DOPF) model is proposed, which incorporates comprehensive and realistic models of relevant distribution system components. A novel optimization objective, which minimizes the energy purchased from the external grid while limiting the number of switching operations of control equipment, is considered. A heuristic method is proposed to solve the DOPF model, which is based on a quadratic penalty approach to reduce the computational burden so as to make the solution process suitable for real-time applications. A Genetic Algorithm based solution method is also implemented to compare and benchmark the performance of the proposed heuristic solution method. The results of applying the DOPF model and the solution methods to two distribution systems, i.e., the IEEE 13-node test feeder and a Hydro One distribution feeder, are discussed. The results demonstrate that the proposed three-phase DOPF model and the heuristic solution method may yield some benefits to the LDCs in real-time optimal operation of distribution systems in the context of Smart Grids.
This work also presents a mathematical model for optimal and real-time control of customer electricity usage, which can be readily integrated by industrial customers into their Energy Hub Management Systems (EHMSs). An Optimal Industrial Load Management (OILM) model is proposed, which minimizes energy costs and/or demand charges, considering comprehensive models of industrial processes, process interdependencies, storage units, process operating constraints, production requirements, and other relevant constraints. The OILM is integrated with the DOPF model to incorporate operating constraints required by the LDC system operator, thus combining voltage optimization with load control for additional benefits. The OILM model is applied to two industrial customers, i.e., a flour mill and a water pumping facility, and the results demonstrate the benefits to the industrial customers and LDCs that can be obtained by deploying the proposed OILM and three-phase DOPF models in EHMSs, in conjunction with Smart Grid technologies.1 yea
Recommended from our members
Provision of secondary frequency regulation by coordinated dispatch of industrial loads and thermal power plants
Demand responsive industrial loads with high thermal inertia have potential to provide ancillary service for frequency regulation in the power market. To capture the benefit, this study proposes a new hierarchical framework to coordinate the demand responsive industrial loads with thermal power plants in an industrial park for secondary frequency control. In the proposed framework, demand responsive loads and generating resources are coordinated for optimal dispatch in two-time scales: (1) the regulation reserve of the industrial park is optimally scheduled in a day-ahead manner. The stochastic regulation signal is replaced by the specific extremely trajectories. Furthermore, the extremely trajectories are achieved by the day-ahead predicted regulation mileage. The resulting benefit is to transform the stochastic reserve scheduling problem into a deterministic optimization; (2) a model predictive control strategy is proposed to dispatch the industry park in real time with an objective to maximize the revenue. The proposed technology is tested using a real-world industrial electrolysis power system based upon Pennsylvania, Jersey, and Maryland (PJM) power market. Various scenarios are simulated to study the performance of the proposed approach to enable industry parks to provide ancillary service into the power market. The simulation results indicate that an industrial park with a capacity of 500 MW can provide up to 40 MW ancillary service for participation in the secondary frequency regulation. The proposed strategy is demonstrated to be capable of maintaining the economic and secure operation of the industrial park while satisfying performance requirements from the real world regulation market
Smart Grid for the Smart City
Modern cities are embracing cutting-edge technologies to improve the services they offer to the citizens from traffic control to the reduction of greenhouse gases and energy provisioning. In this chapter, we look at the energy sector advocating how Information and Communication Technologies (ICT) and signal processing techniques can be integrated into next generation power grids for an increased effectiveness in terms of: electrical stability, distribution, improved communication security, energy production, and utilization. In particular, we deliberate about the use of these techniques within new demand response paradigms, where communities of prosumers (e.g., households, generating part of their electricity consumption) contribute to the satisfaction of the energy demand through load balancing and peak shaving. Our discussion also covers the use of big data analytics for demand response and serious games as a tool to promote energy-efficient behaviors from end users
Cooperative energy management for a cluster of households prosumers
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThe increment of electrical and electronic appliances for improving the lifestyle of residential consumers had led to a larger demand of energy. In order to supply their energy requirements, the consumers have changed the paradigm by integrating renewable energy sources to their power grid. Therefore, consumers become prosumers in which they internally generate and consume energy looking for an autonomous operation. This paper proposes an energy management system for coordinating the operation of distributed household prosumers. It was found that better performance is achieved when cooperative operation with other prosumers in a neighborhood environment is achieved. Simulation and experimental results validate the proposed strategy by comparing the performance of islanded prosumers with the operation in cooperative modePeer ReviewedPostprint (author's final draft
Customer Engagement Plans for Peak Load Reduction in Residential Smart Grids
In this paper, we propose and study the effectiveness of customer engagement
plans that clearly specify the amount of intervention in customer's load
settings by the grid operator for peak load reduction. We suggest two different
types of plans, including Constant Deviation Plans (CDPs) and Proportional
Deviation Plans (PDPs). We define an adjustable reference temperature for both
CDPs and PDPs to limit the output temperature of each thermostat load and to
control the number of devices eligible to participate in Demand Response
Program (DRP). We model thermostat loads as power throttling devices and design
algorithms to evaluate the impact of power throttling states and plan
parameters on peak load reduction. Based on the simulation results, we
recommend PDPs to the customers of a residential community with variable
thermostat set point preferences, while CDPs are suitable for customers with
similar thermostat set point preferences. If thermostat loads have multiple
power throttling states, customer engagement plans with less temperature
deviations from thermostat set points are recommended. Contrary to classical
ON/OFF control, higher temperature deviations are required to achieve similar
amount of peak load reduction. Several other interesting tradeoffs and useful
guidelines for designing mutually beneficial incentives for both the grid
operator and customers can also be identified
Joint Optimal Pricing and Electrical Efficiency Enforcement for Rational Agents in Micro Grids
In electrical distribution grids, the constantly increasing number of power
generation devices based on renewables demands a transition from a centralized
to a distributed generation paradigm. In fact, power injection from Distributed
Energy Resources (DERs) can be selectively controlled to achieve other
objectives beyond supporting loads, such as the minimization of the power
losses along the distribution lines and the subsequent increase of the grid
hosting capacity. However, these technical achievements are only possible if
alongside electrical optimization schemes, a suitable market model is set up to
promote cooperation from the end users. In contrast with the existing
literature, where energy trading and electrical optimization of the grid are
often treated separately or the trading strategy is tailored to a specific
electrical optimization objective, in this work we consider their joint
optimization. Specifically, we present a multi-objective optimization problem
accounting for energy trading, where: 1) DERs try to maximize their profit,
resulting from selling their surplus energy, 2) the loads try to minimize their
expense, and 3) the main power supplier aims at maximizing the electrical grid
efficiency through a suitable discount policy. This optimization problem is
proved to be non convex, and an equivalent convex formulation is derived.
Centralized solutions are discussed first, and are subsequently distributed.
Numerical results to demonstrate the effectiveness of the so obtained optimal
policies are then presented
- …