Power-cost-effective node architecture for light-tree routing in WDM networks

6 pages, 10 figures.-- Contributed to: IEEE Globecom 2008 Optical Networks and Systems Symposium (GC'08 ONS), New Orleans, Louisiana, USA, Nov 30-Dec 4, 2008.We present a novel cost-effective multicast capable optical cross connect (MC-OXC) node architecture which improves efficiency of optical power by constraining splitting to only two output ports, in order to reduce power losses derived from splitting into more than two output ports. This node would manage the following actions when necessary: (a) tap and binary- splitting, which consists of tapping a small percentage of the signal power to the local node (4-8%) and an w-splitting action (n=2); and (b) tap-and-continue. We call this type of node 2-STC node (binary-split-tap-continue). We compare it with other well known state-of-art proposals and analyze its benefits in terms of number of devices and power losses. An evaluation of applicability is given, showing that the binary-split restriction shows a good trade-off between power losses, bandwidth consumption and architectural simplicity. We conclude that the 2-STC node improves power efficiency and contributes to get a good trade-off between use of resources and optical power.The work described in this paper was carried out with the support of the BONE-project ("Building the Future Optical Network in Europe"), a Network of Excellence funded by the European Commission through the 7th ICT-Framework Program. It has also been supported by the Spanish MEC grant TSI2005-07384-C03-02 and PRICIT CCG07-UC3M/TIC-3356.Publicad

Towards all-optical label switching nodes with multicast

Fiber optics has developed so rapidly during the last decades that it has be- come the backbone of our communication systems. Evolved from initially static single-channel point-to-point links, the current advanced optical backbone net- work consists mostly of wavelength-division multiplexed (WDM) networks with optical add/drop multiplexing nodes and optical cross-connects that can switch data in the optical domain. However, the commercially implemented optical net- work nodes are still performing optical circuit switching using wavelength routing. The dedicated use of wavelength and infrequent recon¯guration result in relatively poor bandwidth utilization. The success of electronic packet switching has inspired researchers to improve the °exibility, e±ciency, granularity and network utiliza- tion of optical networks by introducing optical packet switching using short, local optical labels for forwarding decision making at intermediate optical core network nodes, a technique that is referred to as optical label switching (OLS). Various research demonstrations on OLS systems have been reported with transparent optical packet payload forwarding based on electronic packet label processing, taking advantage of the mature technologies of electronic logical cir- cuitry. This approach requires optic-electronic-optic (OEO) conversion of the op- tical labels, a costly and power consuming procedure particularly for high-speed labels. As optical packet payload bit rate increases from gigabit per second (Gb/s) to terabit per second (Tb/s) or higher, the increased speed of the optical labels will eventually face the electronic bottleneck, so that the OEO conversion and the electronic label processing will be no longer e±cient. OLS with label processing in the optical domain, namely, all-optical label switching (AOLS), will become necessary. Di®erent AOLS techniques have been proposed in the last ¯ve years. In this thesis, AOLS node architectures based on optical time-serial label processing are presented for WDM optical packets. The unicast node architecture, where each optical packet is to be sent to only one output port of the node, has been in- vestigated and partially demonstrated in the EU IST-LASAGNE project. This thesis contributes to the multicast aspects of the AOLS nodes, where the optical packets can be forwarded to multiple or all output ports of a node. Multicast capable AOLS nodes are becoming increasingly interesting due to the exponen- tial growth of the emerging multicast Internet and modern data services such as video streaming, high de¯nition TV, multi-party online games, and enterprise ap- plications such as video conferencing and optical storage area networks. Current electronic routers implement multicast in the Internet protocol (IP) layer, which requires not only the OEO conversion of the optical packets, but also exhaus- tive routing table lookup of the globally unique IP addresses. Despite that, there has been no extensive studies on AOLS multicast nodes, technologies and tra±c performance, apart from a few proof-of-principle experimental demonstrations. In this thesis, three aspects of the multicast capable AOLS nodes are addressed: 1. Logical design of the AOLS multicast node architectures, as well as func- tional subsystems and interconnections, based on state-of-the-art literature research of the ¯eld and the subject. 2. Computer simulations of the tra±c performance of di®erent AOLS unicast and multicast node architectures, using a custom-developed AOLS simulator AOLSim. 3. Experimental demonstrations in laboratory and computer simulations using the commercially available simulator VPItransmissionMakerTM, to evaluate the physical layer performance of the required all-optical multicast technolo- gies. A few selected multi-wavelength conversion (MWC) techniques are particularly looked into. MWC is an essential subsystem of the AOLS node for realizing optical packet multicast by making multiple copies of the optical packet all-optically onto di®er- ent wavelengths channels. In this thesis, theMWC techniques based on cross-phase modulation and four-wave mixing are extensively investigated. The former tech- nique o®ers more wavelength °exibility and good conversion e±ciency, but it is only applicable to intensity modulated signals. The latter technique, on the other hand, o®ers strict transparency in data rate and modulation format, but its work- ing wavelengths are limited by the device or component used, and the conversion e±ciency is considerably lower. The proposals and results presented in this thesis show feasibility of all-optical packet switching and multicasting at line speed without any OEO conversion and electronic processing. The scalability and the costly optical components of the AOLS nodes have been so far two of the major obstacles for commercialization of the AOLS concept. This thesis also introduced a novel, scalable optical labeling concept and a label processing scheme for the AOLS multicast nodes. The pro- posed scheme makes use of the spatial positions of each label bit instead of the total absolute value of all the label bits. Thus for an n-bit label, the complexity of the label processor is determined by n instead of 2n

An Autonomic Virtual Topology Design and Two-Stage Scheduling Algorithm for Light-Trail WDM Networks

Light-trails (LTs) have been proposed as a solution for optical networking to provide support for emerging services such as video-on-demand, pseudo-wires, data-centers, etc. To provision these services we require features such as dynamic bandwidth provisioning, optical multicasting, sub-wavelength grooming and a low-cost hardware platform—all of which are available through the LT concept. Architectural, performance, resilience and implementation studies of LTs have led to consideration of this technology in metropolitan networks. In the area of architecture and performance, significant literature is available in terms of static network optimization. An area that has not yet been considered and which is of service provider importance (from an implementation perspective) is the stochastic behavior and dynamic growth of the LT virtual topology. In this paper, we propose a two-stage scheduling algorithm that efficiently allocates bandwidth to nodes within a LT and also grows the virtual topology of LTs based on basic utility theory. The algorithm facilitates growth of the LT topology fathoming across all the necessary and sufficient parameters. The algorithm is formally stated, analyzed using Markov models and verified through simulations, resulting in 45% betterment over existing linear program (LP) or heuristic models. The outcome of the growth algorithm is an autonomic optical network that suffices for service provider needs while lowering operational and capital costs. This paper presents the first work in the area of dual topology planning—at the level of connections as well as at the level of the network itself

Energy Efficient Network Function Virtualisation in 5G Networks

Once the dust settled around 4G, 5G mobile networks become the buzz word in the world of communication systems. The recent surge of bandwidth-greedy applications and the proliferation of smart phones and other wireless connected devices has led to an enormous increase in mobile traffic. Therefore, 5G networks have to deal with a huge number of connected devices of different types and applications, including devices running life-critical applications, and facilitate access to mobile resources easily. Therefore given the increase in traffic and number of connected devices, intelligent and energy efficient architectures are needed to adequately and sustainably meet these requirements. In this thesis network function virtualisation is investigated as a promising paradigm that can contribute to energy consumption reduction in 5G networks. The work carried out in this thesis considers the energy efficiency mainly in terms of processing power consumption and network power consumption. Furthermore, it considers the energy consumption reduction that can be achieved by optimising the locations of virtual machines running the mobile 5G network functions. It also evaluates the consolidation and pooling of the mobile resources. A framework was introduced to virtualise the mobile core network functions and baseband processing functions. Mixed integer linear programming optimisation models and heuristics were developed minimise the total power consumption. The impact of virtualisation in the 5G front haul and back haul passive optical network was investigated by developing MILP models to optimise the location of virtual machines. A further consideration is caching the contents close to the user and its impact on the total power consumption. The impact of a number of factor on the power consumption were investigated such as the total number of active users, the backhaul to the fronthaul traffic ratio, reduction/expansion in the traffic due to baseband processing, and the communication between virtual machines. Finally, the integration of network function virtualisation and content caching were introduced and their impact on improving the energy efficiency was investigated

Advanced techniques for multicast service provision in core transport networks

Although the network-based multicast service is the optimal way to support of a large variety of popular applications such as high-definition television (HDTV), videoon- demand (VoD), virtual private LAN service (VPLS), grid computing, optical storage area networks (O-SAN), video conferencing, e-learning, massive multiplayer online role-playing games (MMORPG), networked virtual reality, etc., there are a number of technological and operational reasons that prevents a wider deployment. This PhD work addresses this problem in the context of core transport network, by proposing and analyzing new cost-effective and scalable techniques to support multicast both at the Optical layer and at the Network layer (MPLS-IP networks). In the Optical layer, in particular in Wavelength Division Multiplexing (WDM) Optical Circuit Switched networks, current multicast-capable OXC node designs are of a great complexity and have high attenuation levels, mainly because of the required signal splitting operation plus the traversal of a complex switching stage. This makes multi-point support rarely included in commercial OXC nodes. Inspired in previous works in the literature, we propose a novel architecture that combines the best of splitting and tap-and-continue (TaC), called 2-STC (2-split-tap-and-continue) in the framework of integrated optics. A 2-STC OXC node is a flexible design capable of tapping and splitting over up to two outgoing links in order to obtain lower end-to-end latency than in TaC and an improved power budget distribution over split-and-delivery (SaD) designs. Another advantage of this architecture is its simplicity and the reduced number of components required, scaling well even for implementations of the node with many input/output ports. Extensive simulations show that the binary split (2-split) is quite enough for most real-life core network topologies scenarios, since the average node degree is usually between 3 and 4. A variant of this design, called 2-STCg, for making the node capable of optical traffic grooming (i.e. accommodation of low-speed demands into wavelength-links) is also presented. At the Network layer, one of the main reasons that hinder multicast deployment is the high amount of forwarding state information required in core routers, especially when a large number of medium/small-sized multicast demands arrive to the core network, because the state data that needs to be kept at intermediate core routers grows proportionally to the number of multicast demands. In this scenario, we study the aggregation of multicast demands into shared distribution trees, providing a set of techniques to observe the trade-off between bandwidth and state information. This study is made in the context of MPLS VPN-based networks, with the aggregation of multicast VPNs in different real network scenarios and using novel heuristics for aggregation. Still, the main problem of aggregation is the high percentage of wasted bandwidth that depends mainly on the amount of shared trees used. On the other hand, recent works have brought back Bloom filters as an alternative for multicast forwarding. In this approach the packet header contains a Bloom filter that is evaluated at each hop for matching with the corresponding outgoing link ID. Although this approach is claimed to be stateless, it presents serious drawbacks due to false positives, namely important forwarding anomalies (duplicated flows, packet storms and loops) and the header overhead. In order to solve these drawbacks we propose D-MPSS (Depth-Wise Multi-Protocol Stateless Switching). This technique makes use of a stack of Bloom filters instead of a single one for all the path/tree, each one including only the links of a given depth of the tree. Analytical studies and simulations show that our approach reduces the forwarding anomalies present in similar state-of-the-art techniques, achieving in most network scenarios a forwarding efficiency (useful traffic) greater than 95%. Finally, we study the possibility of using tree aggregation and Bloom filters together, and propose a set of techniques grouped as H-ABF techniques (hybrid aggregation - Bloom filter-based forwarding), which improve D-MPSS and other previously proposed techniques, practically eliminating the forwarding loops and increasing the forwarding efficiency up to more than 99% in most network scenarios. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Aunque el servicio de multidifusión (multicast) basado en redes es la mejor manera de dar soporte a una gran variedad de aplicaciones populares como la televisión de alta definición (HDTV), el video bajo demanda (VoD), el servicio de LAN privadas virtuales (VPLS), la computación grid, las redes de área de almacenamiento óptico (O-SAN), la videoconferencia, la educación a distancia, los juegos masivos de rol en línea de múltiples jugadores (MMORPG), la realidad virtual en red, etc., hay varias razones tecnológicas y operacionales que le impiden un mayor despliegue. Esta tesis doctoral aborda este problema en el contexto de las redes troncales de transporte, proponiendo y analizando técnicas de bajo coste y escalables para dar soporte al multicast tanto para la capa óptica como para la capa de red (redes MPLS-IP). En la capa óptica, en particular en las redes ópticas conmutadas por circuitos con multiplexación de longitud de onda (WDM), los diseños de nodos OXC con capacidades multicast muestran una gran complejidad y altos niveles de atenuación, principalmente debido a la necesaria operación de división de la señal, además del paso de ella a través de una compleja fase de conmutación. Esto hace que el soporte multi-punto sea raramente incluido en los nodos OXC comerciales. Inspirados en trabajos previos de la literatura, proponemos una novedosa arquitectura que combina lo mejor de dividir (splitting) y tap-y-continuar (TaC), llamado 2-STC (2-split-tapand- continue) en el marco de trabajo de la óptica integrada. Un nodo OXC 2-STC es un diseño flexible capaz de hacer tapping (tomar una pequeña muestra de la señal) y dividir la señal hacia un máximo de dos enlaces de salida, con el fin de obtener una menor latencia terminal-a-terminal que en TaC y una mejorada distribución de la disponibilidad de potencia por encima de los diseños split-and-delivery (SaD). Otra ventaja de esta arquitectura es su simplicidad y el número reducido de componentes requerido, escalando bien para las implementaciones del nodo con muchos puertos de entrada/salida. Extensas simulaciones muestran que la división binaria (2-split) es prácticamente suficiente para la mayoría de las topologías de redes de transporte en la vida real, debido a que el grado promedio de los nodos es usualmente 3 y 4. Una variante de este diseño, llamada 2-STCg, para hacer el nodo capaz de realizar grooming (es decir, la capacidad de acomodar demandas de menor velocidad en longitudes de onda - enlaces) de tráfico óptico, es también presentada. En la capa de red, una de las principales razones que obstaculizan el despliegue del multicast es la gran cantidad de información del estado de reenvío requerida en los enrutadores de la red de transporte, especialmente cuando un gran número de demandas multicast de tamaño mediano/pequeño llegan a la red de transporte, ya que los datos de estado a ser almacenados en los enrutadores crecen proporcionalmente con el número de demandas multicast. En este escenario, estudiamos la agregación de demandas multicast en árboles de distribución, proporcionando un conjunto de técnicas para observar el equilibrio entre el ancho de banda y la información de estado. Este estudio está hecho en el contexto de las redes basadas en redes privadas virtuales (VPN) MPLS, con la agregación de VPNs multicast en distintos escenarios de redes reales y utilizando nuevos heurísticos para la agregación. Aún así, el principal problema de la agregación es el alto porcentaje de ancho de banda desperdiciado que depende principalmente de la cantidad de árboles compartidos usados. Por otro lado, trabajos recientes han vuelto a traer a los filtros de Bloom como una alternativa para realizar el reenvío multicast. En esta aproximación la cabecera del paquete contiene un filtro de Bloom que es evaluado en cada salto para emparejarlo con el identificador del enlace de salida correspondiente. Aunque se afirma que esta solución no utiliza información de estado, presenta serias desventajas debido a los falsos positivos, esto es, anomalías de reenvío importantes (flujos duplicados, tormentas de paquetes y bucles) y gasto de ancho de banda por la cabecera de los paquetes. Para poder resolver estos problemas proponemos D-MPSS (Depth- Wise Multi-Protocol Stateless Switching). Esta técnica hace uso de una pila de filtros de Bloom en lugar de uno sólo para todo el camino/árbol, incluyendo cada uno sólo los enlaces de una determinada profundidad del árbol. Estudios analíticos y simulaciones demuestran que nuestra propuesta reduce los anomalías de reenvío presentes en otras técnicas similares del estado del arte, alcanzando en la mayoría de escenarios reales una eficiencia de reenvío (tráfico útil) mayor que 95%. Finalmente, estudiamos la posibilidad de usar agregación de árboles y filtros de Bloom juntos, y proponemos un conjunto de técnicas agrupadas como técnicas HABF (hybrid aggregation - Bloom filter-based forwarding), que mejoran D-MPSS y las otras técnicas propuestas previamente, eliminando prácticamente los bucles e incrementando la eficiencia de reenvío hasta más de un 99% en la mayoría de los escenarios de redes

Control plane routing in photonic networks

The work described in the thesis investigates the features of control plane functionality for routing wavelength paths to serve a set of sub-wavelength demands. The work takes account of routing problems only found in physical network layers, notably analogue transmission impairments. Much work exists on routing connections for dynamic Wavelength-Routed Optical Networks (WRON) and to demonstrate their advantages over static photonic networks. However, the question of how agile the WRON should be has not been addressed quantitatively. A categorization of switching speeds is extended, and compared with the reasons for requiring network agility. The increase of effective network capacity achieved with increased agility is quantified through new simulations. It is demonstrated that this benefit only occurs within a certain window of network fill; achievement of significant gain from a more-agile network may be prevented by the operator’s chosen tolerable blocking probability. The Wavelength Path Sharing (WPS) scheme uses semi-static wavelengths to form unidirectional photonic shared buses, reducing the need for photonic agility. Making WPS more practical, novel improved routing algorithms are proposed and evaluated for both execution time and performance, offering significant benefit in speed at modest cost in efficiency. Photonic viability is the question of whether a path that the control plane can configure will work with an acceptable bit error rate (BER) despite the physical transmission impairments encountered. It is shown that, although there is no single approach that is simple, quick to execute and generally applicable at this time, under stated conditions approximations may be made to achieve a general solution that will be fast enough to enable some applications of agility. The presented algorithms, analysis of optimal network agility and viability assessment approaches can be applied in the analysis and design of future photonic control planes and network architectures

Towards all-optical label switching nodes with multicast

Fiber optics has developed so rapidly during the last decades that it has be- come the backbone of our communication systems. Evolved from initially static single-channel point-to-point links, the current advanced optical backbone net- work consists mostly of wavelength-division multiplexed (WDM) networks with optical add/drop multiplexing nodes and optical cross-connects that can switch data in the optical domain. However, the commercially implemented optical net- work nodes are still performing optical circuit switching using wavelength routing. The dedicated use of wavelength and infrequent recon¯guration result in relatively poor bandwidth utilization. The success of electronic packet switching has inspired researchers to improve the °exibility, e±ciency, granularity and network utiliza- tion of optical networks by introducing optical packet switching using short, local optical labels for forwarding decision making at intermediate optical core network nodes, a technique that is referred to as optical label switching (OLS). Various research demonstrations on OLS systems have been reported with transparent optical packet payload forwarding based on electronic packet label processing, taking advantage of the mature technologies of electronic logical cir- cuitry. This approach requires optic-electronic-optic (OEO) conversion of the op- tical labels, a costly and power consuming procedure particularly for high-speed labels. As optical packet payload bit rate increases from gigabit per second (Gb/s) to terabit per second (Tb/s) or higher, the increased speed of the optical labels will eventually face the electronic bottleneck, so that the OEO conversion and the electronic label processing will be no longer e±cient. OLS with label processing in the optical domain, namely, all-optical label switching (AOLS), will become necessary. Di®erent AOLS techniques have been proposed in the last ¯ve years. In this thesis, AOLS node architectures based on optical time-serial label processing are presented for WDM optical packets. The unicast node architecture, where each optical packet is to be sent to only one output port of the node, has been in- vestigated and partially demonstrated in the EU IST-LASAGNE project. This thesis contributes to the multicast aspects of the AOLS nodes, where the optical packets can be forwarded to multiple or all output ports of a node. Multicast capable AOLS nodes are becoming increasingly interesting due to the exponen- tial growth of the emerging multicast Internet and modern data services such as video streaming, high de¯nition TV, multi-party online games, and enterprise ap- plications such as video conferencing and optical storage area networks. Current electronic routers implement multicast in the Internet protocol (IP) layer, which requires not only the OEO conversion of the optical packets, but also exhaus- tive routing table lookup of the globally unique IP addresses. Despite that, there has been no extensive studies on AOLS multicast nodes, technologies and tra±c performance, apart from a few proof-of-principle experimental demonstrations. In this thesis, three aspects of the multicast capable AOLS nodes are addressed: 1. Logical design of the AOLS multicast node architectures, as well as func- tional subsystems and interconnections, based on state-of-the-art literature research of the ¯eld and the subject. 2. Computer simulations of the tra±c performance of di®erent AOLS unicast and multicast node architectures, using a custom-developed AOLS simulator AOLSim. 3. Experimental demonstrations in laboratory and computer simulations using the commercially available simulator VPItransmissionMakerTM, to evaluate the physical layer performance of the required all-optical multicast technolo- gies. A few selected multi-wavelength conversion (MWC) techniques are particularly looked into. MWC is an essential subsystem of the AOLS node for realizing optical packet multicast by making multiple copies of the optical packet all-optically onto di®er- ent wavelengths channels. In this thesis, theMWC techniques based on cross-phase modulation and four-wave mixing are extensively investigated. The former tech- nique o®ers more wavelength °exibility and good conversion e±ciency, but it is only applicable to intensity modulated signals. The latter technique, on the other hand, o®ers strict transparency in data rate and modulation format, but its work- ing wavelengths are limited by the device or component used, and the conversion e±ciency is considerably lower. The proposals and results presented in this thesis show feasibility of all-optical packet switching and multicasting at line speed without any OEO conversion and electronic processing. The scalability and the costly optical components of the AOLS nodes have been so far two of the major obstacles for commercialization of the AOLS concept. This thesis also introduced a novel, scalable optical labeling concept and a label processing scheme for the AOLS multicast nodes. The pro- posed scheme makes use of the spatial positions of each label bit instead of the total absolute value of all the label bits. Thus for an n-bit label, the complexity of the label processor is determined by n instead of 2n