Image Enhancement and Noise Reduction Using Modified Delay-Multiply-and-Sum Beamformer: Application to Medical Photoacoustic Imaging

Photoacoustic imaging (PAI) is an emerging biomedical imaging modality capable of providing both high contrast and high resolution of optical and UltraSound (US) imaging. When a short duration laser pulse illuminates the tissue as a target of imaging, tissue induces US waves and detected waves can be used to reconstruct optical absorption distribution. Since receiving part of PA consists of US waves, a large number of beamforming algorithms in US imaging can be applied on PA imaging. Delay-and-Sum (DAS) is the most common beamforming algorithm in US imaging. However, make use of DAS beamformer leads to low resolution images and large scale of off-axis signals contribution. To address these problems a new paradigm namely Delay-Multiply-and-Sum (DMAS), which was used as a reconstruction algorithm in confocal microwave imaging for breast cancer detection, was introduced for US imaging. Consequently, DMAS was used in PA imaging systems and it was shown this algorithm results in resolution enhancement and sidelobe degrading. However, in presence of high level of noise the reconstructed image still suffers from high contribution of noise. In this paper, a modified version of DMAS beamforming algorithm is proposed based on DAS inside DMAS formula expansion. The quantitative and qualitative results show that proposed method results in more noise reduction and resolution enhancement in expense of contrast degrading. For the simulation, two-point target, along with lateral variation in two depths of imaging are employed and it is evaluated under high level of noise in imaging medium. Proposed algorithm in compare to DMAS, results in reduction of lateral valley for about 19 dB followed by more distinguished two-point target. Moreover, levels of sidelobe are reduced for about 25 dB.Comment: This paper was accepted and presented at Iranian Conference on Electrical Engineering (ICEE) 201

Two dimensional angular domain optical imaging in biological tissues

Optical imaging is a modality that can detect optical contrast within a biological sample that is not detectable with other conventional imaging techniques. Optical trans-illumination images of tissue samples are degraded by optical scatter. Angular Domain Imaging (ADI) is an optical imaging technique that filters scattered photons based on the trajectory of the photons. Previous angular filters were limited to one dimensional arrays, greatly limiting the imaging capability of the system. We have developed a 2D Angular Filter Array (AFA) that is capable of acquiring two dimensional projection images of a sample. The AFA was constructed using rapid prototyping techniques. The contrast and the resolution of the AFA was evaluated. The results suggest that a 2D AFA can be used to acquire two dimensional projection images of a sample with a reduced acquisition time compared to a scanning 1D AFA

Online Super-Resolution For Fibre-Bundle-Based Confocal Laser Endomicroscopy

Probe-based Confocal Laser Endomicroscopy (pCLE) produces microscopic images enabling real-time in vivo optical biopsy. However, the miniaturisation of the optical hardware, specifically the reliance on an optical fibre bundle as an imaging guide, fundamentally limits image quality by producing artefacts, noise, and relatively low contrast and resolution. The reconstruction approaches in clinical pCLE products do not fully alleviate these problems. Consequently, image quality remains a barrier that curbs the full potential of pCLE. Enhancing the image quality of pCLE in real-time remains a challenge. The research in this thesis is a response to this need. I have developed dedicated online super-resolution methods that account for the physics of the image acquisition process. These methods have the potential to replace existing reconstruction algorithms without interfering with the fibre design or the hardware of the device. In this thesis, novel processing pipelines are proposed for enhancing the image quality of pCLE. First, I explored a learning-based super-resolution method that relies on mapping from the low to the high-resolution space. Due to the lack of high-resolution pCLE, I proposed to simulate high-resolution data and use it as a ground truth model that is based on the pCLE acquisition physics. However, pCLE images are reconstructed from irregularly distributed fibre signals, and grid-based Convolutional Neural Networks are not designed to take irregular data as input. To alleviate this problem, I designed a new trainable layer that embeds Nadaraya- Watson regression. Finally, I proposed a novel blind super-resolution approach by deploying unsupervised zero-shot learning accompanied by a down-sampling kernel crafted for pCLE. I evaluated these new methods in two ways: a robust image quality assessment and a perceptual quality test assessed by clinical experts. The results demonstrate that the proposed super-resolution pipelines are superior to the current reconstruction algorithm in terms of image quality and clinician preference

Roadmap on optical security

Postprint (author's final draft

Ricerche di Geomatica 2011

Questo volume raccoglie gli articoli che hanno partecipato al Premio AUTeC 2011. Il premio è stato istituito nel 2005. Viene conferito ogni anno ad una tesi di Dottorato giudicata particolarmente significativa sui temi di pertinenza del SSD ICAR/06 (Topografia e Cartografia) nei diversi Dottorati attivi in Italia

A review and perspective on optical phased array for automotive LiDAR

This paper aims to review the state of the art of Light Detection and Ranging (LiDAR) sensors for automotive applications, and particularly for automated vehicles, focusing on recent advances in the field of integrated LiDAR, and one of its key components: the Optical Phased Array (OPA). LiDAR is still a sensor that divides the automotive community, with several automotive companies investing in it, and some companies stating that LiDAR is a ‘useless appendix’. However, currently there is not a single sensor technology able to robustly and completely support automated navigation. Therefore, LiDAR, with its capability to map in 3 dimensions (3D) the vehicle surroundings, is a strong candidate to support Automated Vehicles (AVs). This manuscript highlights current AV sensor challenges, and it analyses the strengths and weaknesses of the perception sensor currently deployed. Then, the manuscript discusses the main LiDAR technologies emerging in automotive, and focuses on integrated LiDAR, challenges associated with light beam steering on a chip, the use of Optical Phased Arrays, finally discussing current factors hindering the affirmation of silicon photonics OPAs and their future research directions