Few-mode optical fiber surface plasmon resonance sensor with controllable range of measured refractive index

A few-mode optical fiber surface plasmon resonance sensor with graphene layer is investigated, firstly, with the aim of studying the behavior of the guided modes and, secondly, with the aim of determining the range of the measured refractive index for some selected few-mode fibers. The results show that as the number of modes propagated in the fiber increases, the maximum sensitivity of a particular mode decreases while the range of the measured refractive index of that mode increases. Also, it is shown that the range can be easily tuned with sensitivity consideration by only adjusting the operating wavelength without any modification of the sensor, which is desirable from practical point of view. In addition, it is shown that the core diameter of the fiber should be chosen according to sensitivity and range needing, where a compromise between them must be found. The study presented in this paper can significantly help in developing new sensing techniques, such as multi-parameter sensing, by monitoring the various responses of the modes. Also, it can be used to customize the sensor for specific sensing applications in various fields, especially to measure refractive indices in subranges of 1.38 to 1.46

Resonant couplings in U shaped fibers for biosensing

U-shaped tight curvatures in optical fibers lead to resonant couplings between the fundamental and higher order modes that are sensible to different parameters, such as strain or temperature, for example. The optical response of the sensor consists on the shift of the resonant wavelength of the coupling. In the case of singlemode fibers, the coupling involves a so-called 'cladding mode' and, due to its evanescent field, the curved region will be sensible to changes in the external medium, as well. In this paper, we present the fabrication and characterization of a robust, easy-to-make, U-shaped fiber sensor based on singlemode telecom fiber and its application for biosensing. The resonant nature of the sensingmechanism presents the advantage of large dynamic ranges for RI variations without the ambiguity of other techniques such as interferometry. We studied the performance of the U-shaped fiber sensor for different bending radii, to optimize its sensitivity and detection limit at 1550 nm operation wavelength, as well as the effect of temperature on its response. The shift of the resonant wavelength was measured in detail as a function of the external RI within the range [1.33-1,37]; the detection limit was established in (2.88 ± 0.03) × 10−5 RIU. Furthermore, the device was successfully tested as a proof of concept biosensor, using a system model antigen-antibody (BSA-aBSA)

Optical Fiber Cladding SPR Sensor Based on Core-Shift Welding Technology

The typical structure of an optical fiber surface plasmon resonance (SPR) sensor, which has been widely investigated, is to produce the SPR phenomenon by the transmission of light in a fiber core. The traditional method is to peel off the fiber cladding by complex methods such as corrosion, polishing, and grinding. In this paper, the transmitted light of a single-mode fiber is injected into three kinds of fiber cladding by core-shift welding technology to obtain the evanescent field directly between the cladding and the air interface and to build the Kretschmann structure by plating with a 50-nm gold film. The SPR sensing phenomenon is realized in three kinds of fiber cladding of a single-mode fiber, a graded-index multimode fiber, and a step-index multimode fiber. For the step-index multimode fiber cladding SPR sensor, all the light field energy is coupled to the cladding, leading to no light field in the fiber core, the deepest resonance valley, and the narrowest full width at half maximum. The single-mode fiber cladding SPR sensor has the highest sensitivity, and the mean sensitivity of the probe reaches 2538 nm/RIU (refractive index unit) after parameter optimization