MIMO Radar Waveform Optimization With Prior Information of the Extended Target and Clutter

The concept of multiple-input multiple-output (MIMO) radar allows each transmitting antenna element to transmit an arbitrary waveform. This provides extra degrees of freedom compared to the traditional transmit beamforming approach. It has been shown in the recent literature that MIMO radar systems have many advantages. In this paper, we consider the joint optimization of waveforms and receiving filters in the MIMO radar for the case of extended target in clutter. A novel iterative algorithm is proposed to optimize the waveforms and receiving filters such that the detection performance can be maximized. The corresponding iterative algorithms are also developed for the case where only the statistics or the uncertainty set of the target impulse response is available. These algorithms guarantee that the SINR performance improves in each iteration step. Numerical results show that the proposed methods have better SINR performance than existing design methods

Joint MIMO radar waveform and receiving filter optimization

The concept of MIMO (multiple-input multipleoutput) radar allows each transmitting antenna element to transmit an arbitrary waveform. This provides extra degrees of freedom compared to the traditional transmit beamforming approach. It has been shown in the recent literature that MIMO radar systems have many advantages. In this paper, we consider the joint optimization of waveforms and receiving filters in the MIMO radar when the prior information of target and clutter are available. A novel iterative algorithm is proposed to optimize the waveforms and receiving filters such that the detection performance can be maximized. The proposed algorithm guarantees that the SINR performance improves in each iteration step. The numerical results show that the proposed methods have better SINR performances than existing design method

Phase-Modulated Waveform Design for Extended Target Detection in the Presence of Clutter

The problem to be addressed in this paper is a phase-modulated waveform design for the detection of extended targets contaminated by signal-dependent noise (clutter) and additive noise in practical radar systems. An optimal waveform design method that leads to the energy spectral density (ESD) of signal under the maximum signal-to-clutter-and-noise ratio (SCNR) criterion is introduced first. In order to make full use of the transmission power, a novel phase-iterative algorithm is then proposed for designing the phase-modulated waveform with a constant envelope, whose ESD matches the optimal one. This method is proven to be able to achieve a small SCNR loss by minimizing the mean-square spectral distance between the optimal waveform and the designed waveform. The results of extensive simulations demonstrate that our approach provides less than 1 dB SCNR loss when the signal duration is greater than 1 μs, and outperforms the stationary phase method and other phase-modulated waveform design methods

US Army remotely piloted vehicle supporting technology program

Essential technology programs that lead to the full scale engineering development of the Aquila Remotely Piloted Vehicle system for U.S. Army are described. The Aquila system uses a small recoverable and reusable RPV to provide target acquisition, designation, and aerial reconnaissance mission support for artillery and smart munitions. Developments that will provide growth capabilities to the Aquila RPV system, as well as future RPV mission concepts being considered by the U.S. Army are presented

Mathematical optimization techniques for cognitive radar networks

This thesis discusses mathematical optimization techniques for waveform design in cognitive radars. These techniques have been designed with an increasing level of sophistication, starting from a bistatic model (i.e. two transmitters and a single receiver) and ending with a cognitive network (i.e. multiple transmitting and multiple receiving radars). The environment under investigation always features strong signal-dependent clutter and noise. All algorithms are based on an iterative waveform-filter optimization. The waveform optimization is based on convex optimization techniques and the exploitation of initial radar waveforms characterized by desired auto and cross-correlation properties. Finally, robust optimization techniques are introduced to account for the assumptions made by cognitive radars on certain second order statistics such as the covariance matrix of the clutter. More specifically, initial optimization techniques were proposed for the case of bistatic radars. By maximizing the signal to interference and noise ratio (SINR) under certain constraints on the transmitted signals, it was possible to iteratively optimize both the orthogonal transmission waveforms and the receiver filter. Subsequently, the above work was extended to a convex optimization framework for a waveform design technique for bistatic radars where both radars transmit and receive to detect targets. The method exploited prior knowledge of the environment to maximize the accumulated target return signal power while keeping the disturbance power to unity at both radar receivers. The thesis further proposes convex optimization based waveform designs for multiple input multiple output (MIMO) based cognitive radars. All radars within the system are able to both transmit and receive signals for detecting targets. The proposed model investigated two complementary optimization techniques. The first one aims at optimizing the signal to interference and noise ratio (SINR) of a specific radar while keeping the SINR of the remaining radars at desired levels. The second approach optimizes the SINR of all radars using a max-min optimization criterion. To account for possible mismatches between actual parameters and estimated ones, this thesis includes robust optimization techniques. Initially, the multistatic, signal-dependent model was tested against existing worst-case and probabilistic methods. These methods appeared to be over conservative and generic for the considered signal-dependent clutter scenario. Therefore a new approach was derived where uncertainty was assumed directly on the radar cross-section and Doppler parameters of the clutters. Approximations based on Taylor series were invoked to make the optimization problem convex and {subsequently} determine robust waveforms with specific SINR outage constraints. Finally, this thesis introduces robust optimization techniques for through-the-wall radars. These are also cognitive but rely on different optimization techniques than the ones previously discussed. By noticing the similarities between the minimum variance distortionless response (MVDR) problem and the matched-illumination one, this thesis introduces robust optimization techniques that consider uncertainty on environment-related parameters. Various performance analyses demonstrate the effectiveness of all the above algorithms in providing a significant increase in SINR in an environment affected by very strong clutter and noise

An improved adaptive sidelobe blanker

We propose a two-stage detector consisting of a subspace detector followed by the whitened adaptive beamformer orthogonal rejection test. The performance analysis shows that it possesses the constant false alarm rate property with respect to the unknown covariance matrix of the noise and that it can guarantee a wider range of directivity values with respect to previously proposed two-stage detectors. The probability of false alarm and the probability of detection (for both matched and mismatched signals) have been evaluated by means of numerical integration techniques

Adaptive Coding, Modulation and Filtering of Radar Signals

In this chapter, some of the issues associated with radar signal processing are highlighted, with an emphasis on adaptability. Signal processing operations are carried by systems in order to enhance the received signal or to clarify its content of information. Received radar signal should be subjected to processing prior to the extraction of useful target information out of it so as to emphasize desired signal among other accompanying signals. Processing of the radio frequency (RF) signal is generally done in an analogue manner, while digital signal processing (DSP) became dominant in the intermediate-frequency (IF) and low-frequency portions of the system. Since the detectability and immunity against interference and clutter strongly depend on the waveform used, it will be more efficient to apply a diverse waveform instead of confinement to an invariable waveform of a fixed code and pattern. Adaptive coding, modulation and filtering of radar signals provide high degree of diversity as well as flexibility and agility for signal processors versus changing sources of interference and environmentally dependent reflectors. Constant false alarm rate (CFAR) is an adaptive processing technique that reduces noise and clutter. Different methods are applied in CFAR technique to adaptively cope with varying clutter density and distribution