Application Of Digital Signal Analysis, Mass Data Acquisition and Processing Techniques, and Automated Experiment Protocols to the Study of Cardiac Cell Membrane Electrophysiology, with Mathematical Modeling

Traditional methods of collecting, analyzing and storing data from cardiac cell membrane electrophysiology experiments have become increasingly cumbersome and unwieldy as experimental protocols have become more sophisticated and complex. A global approach to collecting, analyzing, refining and storing electrophysiologic data, as well as a new approach to mathematical modeling of cell membrane single ion channel kinetics, was developed. This utilizes a comprehensive microcomputer based system of software with specialized analog and digital electronics for data acquisition, analysis and archiving. Unique discrete signal processing techniques for characterizing the electronic recording system, including specialized hardware and software adapted for minimizing distortions in biosignal recordings, are discussed in detail

Assessing Novel Lidar Modalities for Maximizing Coverage of a Spaceborne System through the Use of Diode Lasers

Current satellite lidars have sparse spatial coverage, leading to uncertainty from sampling. This complicates robust change detection and does not allow applications that require continuous coverage. One potential way to increase lidar sampling density is to use more efficient lasers. All current spaceborne lidars use solid-state lasers with a limited efficiency of 5–8%. In this paper, we investigate the potential for using diode lasers, with their higher efficiencies, as an alternative. Diode lasers have reported efficiencies of about 25% and are much smaller and lighter than solid-state lasers. However, they can only emit good beam quality at lower peak powers, which has so far prevented them from being used in spaceborne lidar applications. In this paper, we assess whether the novel lidar modalities necessitated by these lower peak powers are suitable for satellite lidar, determined by whether they can match the design performance of GEDI by being able to accurately measure ground elevation through 98% canopy cover, referred to as having “98% beam sensitivity”. Through this, we show that a diode laser can be operated in pulse train or pulse compressed lidar (PCL) mode from space, using a photon-counting detector. In the best case scenario, this setup requires a detected energy of Edet=0.027 fJ to achieve a beam sensitivity of 98%, which is less than the 0.28 fJ required by a full-waveform solid-state lidar instrument, exemplified by GEDI. When also accounting for the higher laser and detector efficiency, the diode laser in pulse train mode requires similar shot energy as a photon counting solid-state laser such as ICESat-2 which along with the higher laser efficiency could result in a doubling of coverage. We conclude that there is a clear opportunity for diode lasers to be used in spaceborne lidars, potentially allowing wider coverage through their higher efficiencies

The design of digital-adaptive controllers for VTOL aircraft

Design procedures for VTOL automatic control systems have been developed and are presented. Using linear-optimal estimation and control techniques as a starting point, digital-adaptive control laws have been designed for the VALT Research Aircraft, a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. These control laws are designed to interface with velocity-command and attitude-command guidance logic, which could be used in short-haul VTOL operations. Developments reported here include new algorithms for designing non-zero-set-point digital regulators, design procedures for rate-limited systems, and algorithms for dynamic control trim setting

A Study of Synchronization Techniques for Optical Communication Systems

The study of synchronization techniques and related topics in the design of high data rate, deep space, optical communication systems was reported. Data cover: (1) effects of timing errors in narrow pulsed digital optical systems, (2) accuracy of microwave timing systems operating in low powered optical systems, (3) development of improved tracking systems for the optical channel and determination of their tracking performance, (4) development of usable photodetector mathematical models for application to analysis and performance design in communication receivers, and (5) study application of multi-level block encoding to optical transmission of digital data