Fuzzy logic control of telerobot manipulators

Telerobot systems for advanced applications will require manipulators with redundant 'degrees of freedom' (DOF) that are capable of adapting manipulator configurations to avoid obstacles while achieving the user specified goal. Conventional methods for control of manipulators (based on solution of the inverse kinematics) cannot be easily extended to these situations. Fuzzy logic control offers a possible solution to these needs. A current research program at SRI developed a fuzzy logic controller for a redundant, 4 DOF, planar manipulator. The manipulator end point trajectory can be specified by either a computer program (robot mode) or by manual input (teleoperator). The approach used expresses end-point error and the location of manipulator joints as fuzzy variables. Joint motions are determined by a fuzzy rule set without requiring solution of the inverse kinematics. Additional rules for sensor data, obstacle avoidance and preferred manipulator configuration, e.g., 'righty' or 'lefty', are easily accommodated. The procedure used to generate the fuzzy rules can be extended to higher DOF systems

An inverse kinematics algorithm for a highly redundant variable-geometry-truss manipulator

A new class of robotic arm consists of a periodic sequence of truss substructures, each of which has several variable-length members. Such variable-geometry-truss manipulator (VGTMs) are inherently highly redundant and promise a significant increase in dexterity over conventional anthropomorphic manipulators. This dexterity may be exploited for both obstacle avoidance and controlled deployment in complex workspaces. The inverse kinematics problem for such unorthodox manipulators, however, becomes complex because of the large number of degrees of freedom, and conventional solutions to the inverse kinematics problem become inefficient because of the high degree of redundancy. A solution is presented to this problem based on a spline-like reference curve for the manipulator's shape. Such an approach has a number of advantages: (1) direct, intuitive manipulation of shape; (2) reduced calculation time; and (3) direct control over the effective degree of redundancy of the manipulator. Furthermore, although the algorithm was developed primarily for variable-geometry-truss manipulators, it is general enough for application to a number of manipulator designs

Investigation of cyclicity of kinematic resolution methods for serial and parallel planar manipulators

Kinematic redundancy of manipulators is a well-understood topic, and various methods were developed for the redundancy resolution in order to solve the inverse kinematics problem, at least for serial manipulators. An important question, with high practical relevance, is whether the inverse kinematics solution is cyclic, i.e., whether the redundancy solution leads to a closed path in joint space as a solution of a closed path in task space. This paper investigates the cyclicity property of two widely used redundancy resolution methods, namely the projected gradient method (PGM) and the augmented Jacobian method (AJM), by means of examples. Both methods determine solutions that minimize an objective function, and from an application point of view, the sensitivity of the methods on the initial configuration is crucial. Numerical results are reported for redundant serial robotic arms and for redundant parallel kinematic manipulators. While the AJM is known to be cyclic, it turns out that also the PGM exhibits cyclicity. However, only the PGM converges to the local optimum of the objective function when starting from an initial configuration of the cyclic trajector

Motion Planning of Redundant Manipulator With Variable Joint Velocity Limit Based on Beetle Antennae Search Algorithm

Redundant manipulators play important roles in many industrial and service applications by assisting people fulfill heavy and repetitive jobs. However, redundant manipulators are coupled highly-nonlinear systems which exert difficulty of redundancy resolution computation. Conventional methods such as pseudo-inverse-based approaches obtain the resolved joint angles from joint velocity level, which may bring about more computational cost and may neglect joint velocity limits. In this work, a motion planning method based on beetle antennae search algorithm (BAS) is proposed for motion planning of redundant manipulators with the variable joint velocity limit. Such proposed work does not need to resolve the velocity kinematics equation as the conventional methods do, and the proposed method can directly deal with the forward kinematics equation to resolve the desired joint angles. The simulation and experiment on the five-link planar manipulator and the Kuka industrial manipulator system demonstrate the efficiency of the proposed method for motion planning of redundant manipulator, and reveal the reliable performance of the BAS algorithm as compared with genetic algorithm (GA), particle swarm optimization (PSO), firefly algorithm(FA) and quantum behaved particle swarm algorithm(QPSO) methods

A General Numerical Method for Hyper-Redundant Manipulator Inverse Kinematics

Hyper-redundant robots have a very large or infinite degree of kinematic redundancy. A generalized resolved-rate technique for solving hyper-redundant manipulator inverse kinematics using a backbone curve is introduced. This method is applicable even in cases when explicit representation of the backbone curve intrinsic geometry cannot be written in closed form. Problems of end-effector trajectory tracking which were previously intractable can now be handled with this technique. Examples include configurations generated using the calculus of variations. The method is naturally parallelizable for fast digital and/or analog computation

A hyper-redundant manipulator

“Hyper-redundant” manipulators have a very large number of actuatable degrees of freedom. The benefits of hyper-redundant robots include the ability to avoid obstacles, increased robustness with respect to mechanical failure, and the ability to perform new forms of robot locomotion and grasping. The authors examine hyper-redundant manipulator design criteria and the physical implementation of one particular design: a variable geometry truss

A modal approach to hyper-redundant manipulator kinematics

This paper presents novel and efficient kinematic modeling techniques for “hyper-redundant” robots. This approach is based on a “backbone curve” that captures the robot's macroscopic geometric features. The inverse kinematic, or “hyper-redundancy resolution,” problem reduces to determining the time varying backbone curve behavior. To efficiently solve the inverse kinematics problem, the authors introduce a “modal” approach, in which a set of intrinsic backbone curve shape functions are restricted to a modal form. The singularities of the modal approach, modal non-degeneracy conditions, and modal switching are considered. For discretely segmented morphologies, the authors introduce “fitting” algorithms that determine the actuator displacements that cause the discrete manipulator to adhere to the backbone curve. These techniques are demonstrated with planar and spatial mechanism examples. They have also been implemented on a 30 degree-of-freedom robot prototype