On the Energy Efficiency of Hybrid Relaying Schemes in the Two-Way Relay Channel

In this paper, hybrid relaying schemes are investigated in the two-way relay channel, where the relay node is able to adaptively switch between different forwarding schemes based on the current channel state and its decoding status and thus provides more flexibility as well as improved performance. The analysis is conducted from the energy efficiency perspective for two transmission protocols distinguished by whether exploiting the direct link between two main communicating nodes (the source and destination nodes, and vice versa since it is two way communication) or not. A realistic power model taking circuitry power consumption of all involved nodes into account is employed. The energy efficiency is optimized in terms of consumed energy per bit subject to the Quality of Service (QoS) constraint. Numerical results show that the hybrid schemes are able to achieve the highest energy efficiency due to its capability of adapting to the channel variations and the protocol where the direct link is exploited is more energy efficient

H2-ARQ-relaying: spectrum and energy efficiency perspectives

In this paper, we propose novel Hybrid Automatic Repeat re-Quest (HARQ) strategies used in conjunction with hybrid relaying schemes, named as H2-ARQ-Relaying. The strategies allow the relay to dynamically switch between amplify-and-forward/compress-and-forward and decode-and-forward schemes according to its decoding status. The performance analysis is conducted from both the spectrum and energy efficiency perspectives. The spectrum efficiency of the proposed strategies, in terms of the maximum throughput, is significantly improved compared with their non-hybrid counterparts under the same constraints. The consumed energy per bit is optimized by manipulating the node activation time, the transmission energy and the power allocation between the source and the relay. The circuitry energy consumption of all involved nodes is taken into consideration. Numerical results shed light on how and when the energy efficiency can be improved in cooperative HARQ. For instance, cooperative HARQ is shown to be energy efficient in long distance transmission only. Furthermore, we consider the fact that the compress-and-forward scheme requires instantaneous signal to noise ratios of all three constituent links. However, this requirement can be impractical in some cases. In this regard, we introduce an improved strategy where only partial and affordable channel state information feedback is needed

Trading Wireless Information and Power Transfer: Relay Selection to Minimize the Outage Probability

This paper studies the outage probability minimization problem for a multiple relay network with energy harvesting constraints. The relays are hybrid nodes used for simultaneous wireless information and power transfer from the source radio frequency (RF) signals. There is a trade-off associated with the amount of time a relay node is used for energy and information transfer. Large intervals of information transfer implies little time for energy harvesting from RF signals and thus, high probability of outage events. We propose relay selection schemes for a cooperative system with a fixed number of RF powered relays. We address both causal and non-causal channel state information cases at the relay--destination link and evaluate the trade-off associated with information/power transfer in the context of minimization of outage probability.Comment: IEEE GlobalSiP, 201

Multipair Full-Duplex Relaying with Massive Arrays and Linear Processing

We consider a multipair decode-and-forward relay channel, where multiple sources transmit simultaneously their signals to multiple destinations with the help of a full-duplex relay station. We assume that the relay station is equipped with massive arrays, while all sources and destinations have a single antenna. The relay station uses channel estimates obtained from received pilots and zero-forcing (ZF) or maximum-ratio combining/maximum-ratio transmission (MRC/MRT) to process the signals. To reduce significantly the loop interference effect, we propose two techniques: i) using a massive receive antenna array; or ii) using a massive transmit antenna array together with very low transmit power at the relay station. We derive an exact achievable rate in closed-form for MRC/MRT processing and an analytical approximation of the achievable rate for ZF processing. This approximation is very tight, especially for large number of relay station antennas. These closed-form expressions enable us to determine the regions where the full-duplex mode outperforms the half-duplex mode, as well as, to design an optimal power allocation scheme. This optimal power allocation scheme aims to maximize the energy efficiency for a given sum spectral efficiency and under peak power constraints at the relay station and sources. Numerical results verify the effectiveness of the optimal power allocation scheme. Furthermore, we show that, by doubling the number of transmit/receive antennas at the relay station, the transmit power of each source and of the relay station can be reduced by 1.5dB if the pilot power is equal to the signal power, and by 3dB if the pilot power is kept fixed, while maintaining a given quality-of-service