274,814 research outputs found
Conditional beam splitting attack on quantum key distribution
We present a novel attack on quantum key distribution based on the idea of
adaptive absorption [calsam01]. The conditional beam splitting attack is shown
to be much more efficient than the conventional beam spitting attack, achieving
a performance similar to the, powerful but currently unfeasible, photon number
splitting attack. The implementation of the conditional beam splitting attack,
based solely on linear optical elements, is well within reach of current
technology.Comment: Submitted to Phys. Rev.
Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab
A high energy beam absorber has been built for the Advanced Superconducting
Test Accelerator (ASTA) at Fermilab. In the facility's initial configuration,
an electron beam will be accelerated through 3 TTF-type or ILC-type RF
cryomodules to an energy of 750MeV. The electron beam will be directed to one
of multiple downstream experimental and diagnostic beam lines and then
deposited in one of two beam absorbers. The facility is designed to accommodate
up to 6 cryomodules, which would produce a 75kW beam at 1.5GeV; this is the
driving design condition for the beam absorbers. The beam absorbers consist of
water-cooled graphite, aluminum and copper layers contained in a Helium-filled
enclosure. This paper describes the mechanical implementation of the beam
absorbers, with a focus on thermal design and analysis. In addition, the
potential for radiation-induced degradation of the graphite is discussed.Comment: 3 pp. 3rd International Particle Accelerator Conference (IPAC 2012)
20-25 May 2012. New Orleans, Louisian
Implementing general measurements on linear optical and solid-state qubits
We show a systematic construction for implementing general measurements on a
single qubit, including both strong (or projection) and weak measurements. We
mainly focus on linear optical qubits. The present approach is composed of
simple and feasible elements, i.e., beam splitters, wave plates, and polarizing
beam splitters. We show how the parameters characterizing the measurement
operators are controlled by the linear optical elements. We also propose a
method for the implementation of general measurements in solid-state qubits.Comment: 8 pages, 3 figure
Development of a beam propagation method to simulate the point spread function degradation in scattering media
Scattering is one of the main issues that limit the imaging depth in deep tissue optical imaging. To characterize the role of scattering, we have developed a forward model based on the beam propagation method and established the link between the macroscopic optical properties of the media and the statistical parameters of the phase masks applied to the wavefront. Using this model, we have analyzed the degradation of the point-spread function of the illumination beam in the transition regime from ballistic to diffusive light transport. Our method provides a wave-optic simulation toolkit to analyze the effects of scattering on image quality degradation in scanning microscopy. Our open-source implementation is available at https://github.com/BUNPC/Beam-Propagation-Method.Accepted manuscrip
CRAB Cavity in CERN SPS
Beam collisions with a crossing angle at the interaction point have been
applied in high intensity colliders to reduce the effects of parasitic
collisions which induce emittance growth and beam lifetime deterioration. The
crossing angle causes the geometrical reduction of the luminosity. Crab cavity
can be one of the most promising ways to compensate the crossing angle and to
realize effective head-on collisions. Moreover, the crab crossing mitigates the
synchro-betatron resonances due to the crossing angle. Crab cavity experiment
in SPS is proposed for deciding on a full crab-cavity implementation in LHC. In
this paper, we investigate the effects of crab crossing on beam dynamics and
its life time with the global scheme.Comment: 3 pp. 1st International Particle Accelerator Conference: IPAC'10,
23-28 May 2010: Kyoto, Japa
A Parallel General Purpose Multi-Objective Optimization Framework, with Application to Beam Dynamics
Particle accelerators are invaluable tools for research in the basic and
applied sciences, in fields such as materials science, chemistry, the
biosciences, particle physics, nuclear physics and medicine. The design,
commissioning, and operation of accelerator facilities is a non-trivial task,
due to the large number of control parameters and the complex interplay of
several conflicting design goals. We propose to tackle this problem by means of
multi-objective optimization algorithms which also facilitate a parallel
deployment. In order to compute solutions in a meaningful time frame a fast and
scalable software framework is required. In this paper, we present the
implementation of such a general-purpose framework for simulation-based
multi-objective optimization methods that allows the automatic investigation of
optimal sets of machine parameters. The implementation is based on a
master/slave paradigm, employing several masters that govern a set of slaves
executing simulations and performing optimization tasks. Using evolutionary
algorithms as the optimizer and OPAL as the forward solver, validation
experiments and results of multi-objective optimization problems in the domain
of beam dynamics are presented. The high charge beam line at the Argonne
Wakefield Accelerator Facility was used as the beam dynamics model. The 3D beam
size, transverse momentum, and energy spread were optimized
Design and real time implementation of nonlinear minimum variance filter
In this paper, the design and real time implementation of a Nonlinear Minimum Variance (NMV) estimator is presented using a laboratory based ball and beam system. The real time implementation employs a LabVIEW based tool. The novelty of this work lies in the design steps and the practical implementation of the NMV estimation technique which up till now only investigated using simulation studies. The paper also discusses the advantages and limitations of the NMV estimator based on the real time application results. These are compared with results obtained using an extended Kalman filter
Tevatron Beam Halo Collimation System: Design, Operational Experience and New Methods
Collimation of proton and antiproton beams in the Tevatron collider is
required to protect CDF and D0 detectors and minimize their background rates,
to keep irradiation of superconducting magnets under control, to maintain
long-term operational reliability, and to reduce the impact of beam-induced
radiation on the environment. In this article we briefly describe the design,
practical implementation and performance of the collider collimation system,
methods to control transverse and longitudinal beam halo and two novel
collimation techniques tested in the Tevatron.Comment: 25 p
- âŠ