Adaptive-smith predictor for controlling an automotive electronic throttle over network

The paper presents a control strategy for an automotive electronic throttle, a device used to regulate the power produced by spark-ignition engines. Controlling the electronic throttle body is a difficult task because the throttle accounts strong nonlinearities. The difficulty increases when the control works through communication networks subject to random delay. In this paper, we revisit the Smith-predictor control, and show how to adapt it for controlling the electronic throttle body over a delay-driven network. Experiments were carried out in a laboratory, and the corresponding data indicate the benefits of our approach for applications.Peer ReviewedPostprint (published version

Development of a general purpose airborne simulator

Variable stability system development for General Purpose Airborne Simulator /GPAS

Flight-test evaluation of STOL control and flight director concepts in a powered-lift aircraft flying curved decelerating approaches

Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating approach profiles in powered lift STOL aircraft. Several STOL control concepts representative of a variety of aircraft were evaluated in conjunction with suitably designed flight directions. The tests were carried out in a real navigation environment, employed special electronic cockpit displays, and included the development of the performance achieved and the control utilization involved in flying 180 deg turning, descending, and decelerating approach profiles to landing. The results suggest that such moderately complex piloted instrument approaches may indeed be feasible from a pilot acceptance point of view, given an acceptable navigation environment. Systems with the capability of those used in this experiment can provide the potential of achieving instrument operations on curved, descending, and decelerating landing approaches to weather minima corresponding to CTOL Category 2 criteria, while also providing a means of realizing more efficient operations during visual flight conditions

Solar UAV for long endurance flights

The project have been done during the four months stay in Lithuania by Marc Olmo and LLibert Chamizo. The aim of the project was to obtain an Unmanned Aerial Vehicle powered by solar energy that was able to flight for as long as possible it within the limitations which are the budget, the time and the technological limitations. During the limited time, the team have been working in all the necessary phases to build a real scale and fully functional Solar UAV. This phases were the following; Theoretical Calculations, Design, Simulation, Building, Tests of the Airframe, Solar Energy Circuit Design and Building 2nd phase tests and Conclusion Obtaining. Through all the process several technical and engineering decisions have been made leading the team to obtain a fully functional 4,4m wingspan fixed wing UAV with a TOW of 5,5 Kg which is perfectly pilotable The final achievements have been a UAV capable of long endurance flight within daytime. The model achieved was able to maintain level, climb and turn perfectly using just the power gathered by the solar cells in its wing. During the development of the project the possibility of the multiday flight have been discussed leading to the conclusion that it's viable but not within the frame of this project. There have been done several tests under actual mission parameters loading the plane with the weight it would be carried during the missions that are most likely solar uav related such as mapping or surveillance. The final result have been correct and lead to an optimistic opinion about the whole Solar UAV paradigm and about the prototype modification and improvement in the near future to achieve even better results (which have been overviewed and planned in the actual report). A fatal error drove the airplane to a nosedive fall with disastrous consequences, the whole project feels and success though it's undoubtable

Robust H2 static output feedback to control an autmomotive throttle valve

The paper presents a control strategy for an automotive electronic throttle body, a device largely used into vehicles to increase the efficiency of the combustion engines. The synthesis of the proposed controller is based on a linear matrix inequality (LMI) formulation, which allows us to deal with uncertainties on the measurements of the position of the throttle valve. The LMI approach generates a suboptimal solution for the robust H-2 static output feedback control problem, and the corresponding suboptimal control gain was evaluated in practice to control the valve position of the throttle. The usefulness of the approach has been verified not only by numerical simulations but also by real experiments taken in a laboratory prototype.Postprint (published version

High-speed civil transport flight- and propulsion-control technological issues

Technology advances required in the flight and propulsion control system disciplines to develop a high speed civil transport (HSCT) are identified. The mission and requirements of the transport and major flight and propulsion control technology issues are discussed. Each issue is ranked and, for each issue, a plan for technology readiness is given. Certain features are unique and dominate control system design. These features include the high temperature environment, large flexible aircraft, control-configured empennage, minimizing control margins, and high availability and excellent maintainability. The failure to resolve most high-priority issues can prevent the transport from achieving its goals. The flow-time for hardware may require stimulus, since market forces may be insufficient to ensure timely production. Flight and propulsion control technology will contribute to takeoff gross weight reduction. Similar technology advances are necessary also to ensure flight safety for the transport. The certification basis of the HSCT must be negotiated between airplane manufacturers and government regulators. Efficient, quality design of the transport will require an integrated set of design tools that support the entire engineering design team

STOLAND

The STOLAND system includes air data, navigation, guidance, flight director (including a throttle flight director on the Augmentor Wing), 3-axis autopilot and autothrottle functions. The 3-axis autopilot and autothrottle control through parallel electric servos on both aircraft and on the augmentor wing, the system also interfaces with three electrohydraulic series actuators which drive the roll control surfaces, elevator and rudder. The system incorporates automatic configuration control of the flaps and nozzles on the augmentor wing and of the flaps on the Twin Otter. Interfaces are also provided to control the wing flap chokes on the Augmentor Wing and the spoilers on the Twin Otter. The STOLAND system has all the capabilities of a conventional integrated avionics system. Aircraft stabilization is provided in pitch, roll and yaw including control wheel steering in pitch and roll. The basic modes include altitude hold and select, indicated airspeed hold and select, flight path angle hold and select, and heading hold and select. The system can couple to TACAN and VOR/DME navaids for conventional radial flying