Artificial neural networks for location estimation and co-cannel interference suppression in cellular networks

This thesis reports on the application of artificial neural networks to two important problems encountered in cellular communications, namely, location estimation and co-channel interference suppression. The prediction of a mobile location using propagation path loss (signal strength) is a very difficult and complex task. Several techniques have been proposed recently mostly based on linearized, geometrical and maximum likelihood methods. An alternative approach based on artificial neural networks is proposed in this thesis which offers the advantages of increased flexibility to adapt to different environments and high speed parallel processing. Location estimation provides users of cellular telephones with information about their location. Some of the existing location estimation techniques such as those used in GPS satellite navigation systems require non-standard features, either from the cellular phone or the cellular network. However, it is possible to use the existing GSM technology for location estimation by taking advantage of the signals transmitted between the phone and the network. This thesis proposes the application of neural networks to predict the location coordinates from signal strength data. New multi-layered perceptron and radial basis function based neural networks are employed for the prediction of mobile locations using signal strength measurements in a simulated COST-231 metropolitan environment. In addition, initial preliminary results using limited available real signal-strength measurements in a metropolitan environment are also reported comparing the performance of the neural predictors with a conventional linear technique. The results indicate that the neural predictors can be trained to provide a near perfect mapping using signal strength measurements from two or more base stations. The second application of neural networks addressed in this thesis, is concerned with adaptive equalization, which is known to be an important technique for combating distortion and Inter-Symbol Interference (ISI) in digital communication channels. However, many communication systems are also impaired by what is known as co-channel interference (CCI). Many digital communications systems such as digital cellular radio (DCR) and dual polarized micro-wave radio, for example, employ frequency re-usage and often exhibit performance limitation due to co-channel interference. The degradation in performance due to CCI is more severe than due to ISI. Therefore, simple and effective interference suppression techniques are required to mitigate the interference for a high-quality signal reception. The current work briefly reviews the application of neural network based non-linear adaptive equalizers to the problem of combating co-channel interference, without a priori knowledge of the channel or co-channel orders. A realistic co-channel system is used as a case study to demonstrate the superior equalization capability of the functional-link neural network based Decision Feedback Equalizer (DFE) compared to other conventional linear and neural network based non-linear adaptive equalizers.This project was funded by Solectron (Scotland) Ltd

Measurement and modeling of interference for multiple antenna system

Journal ArticleThis paper provides a detailed signal model based on network theory to predict the multi-antenna capacity in the presence of co- and adjacent channel interference. This model expands on previous channel models by including the simultaneous effects of interference, antenna matching, efficiency, directivity and polarization. Single and multi-antenna interference are modeled using both a statistical channel model and a site-specific 3D ray tracer. The network theory based detailed signal model was obtained by adding antenna front end effects at both the transmitter and receiver to the channel models. This model was validated with measurements performed in two underground tunnels. The site-specific model predicted the capacity to within 1 bit/sec/Hz of the measurements while the statistical model was within 1-2 bits/sec/Hz except for a few locations. It was also observed that for small antenna spacing the conjugate match provides higher capacity than the self match

Measuring the Interference at an RFID Tag: Where Does It Have an Impact?

In this paper we consider reader collisions in an RFID system, especially how interference impacts the ability of a passive UHF tag to respond. We propose two innovative applications for using interference: 1) Blocking a tag response, and 2) cooperative reading of a tag. In order to investigate their applicability we focus on the experimental evaluation, where we impose interference on the download and uplink, respectively, and on both links simultaneously. The results are positive with respect to blocking the tag, where modulated Co-Channel Interference shows most effective. Based on the measurements it is however not possible to read a tag cooperatively, i.e. the tag is unable to utilize the interference as an additional energy source

Measurement and modeling of multiuser multiantenna system in aircraft in the presence of electromagnetic noise and interference

ManuscriptThis paper evaluates the accuracy with which the performance of a multi-user multi-antenna system can be predicted with and without considering co-channel interference and noise (Gaussian, α- stable and Cauchy) using a site-specific 3D ray-tracing algorithm as well as with statistical models with Gaussian and Nakagami-m channel models in small to medium sized aircraft. These models expand on previous statistical channel models such as the hyper-Rayleigh model by including the simultaneous effects of co- and adjacent channel interference, antenna matching, efficiency, directivity and polarization as well as (for the 3D model) site-specific multipath effects. Measurements and comparisons are made in a metallic-bodied Beech Baron BE 58P and a composite structure Rockwell T-39 Sabreliner. It was found that the 3D ray tracing model provides a mean capacity within 1 % of those measured in the two aircraft in the presence of interference and noise. This was closely followed by the Nakagami-m distribution (m=1.4) which was within 1-3% of measured capacity in the presence of interference and within 6% for a combination of interference and noise and the Gaussian model which was within 6% of measured capacity in the presence of interference and within 11% for a combination of interference and noise . The Cauchy noise degraded the capacity more than the other types of noise in the aircraft, providing a lower bound for capacity in an aircraft system

Evaluation of 5G and Fixed-Satellite Service Earth Station (FSS-ES) downlink interference based on Artificial Neural Network Learning Models (ANN-LMS)

Fifth-generation (5G) networks have been deployed alongside fourth-generation networks in high-traffic areas. The most recent 5G mobile communication access technology includes mmWave and sub-6 GHz C-bands. However, 5G signals possibly interfere with existing radio systems because they are using adjacent and co-channel frequencies. Therefore, the minimisation of the interference of 5G with other signals already deployed for other services, such as fixed-satellite service Earth stations (FSS-Ess), is urgently needed. The novelty of this paper is that it addresses issues using measurements from 5G base stations (5G-BS) and FSS-ES, simulation analysis, and prediction modelling based on artificial neural network learning models (ANN-LMs). The ANN-LMs models are used to classify interference events into two classes, namely, adjacent and co-channel interference. In particular, ANN-LMs incorporating the radial basis function neural network (RBFNN) and general regression neural network (GRNN) are implemented. Numerical results considering real measurements carried out in Malaysia show that RBFNN evidences better accuracy with respect to its GRNN counterpart. The outcomes of this work can be exploited in the future as a baseline for coexistence and/or mitigation techniques.Agencia Estatal de Investigación | Ref. PID2020-115323RB-C33Agencia Estatal de Investigación | Ref. PID2020-113240RB-I0

Lightning Interference in Multiple Antennas Wireless Communication Systems

This paper analyzes the interference of lightning flashes with multiple antennas wireless communication systems operating in the microwave band at 2.4 GHz and 5.2 GHz. A bit error rate (BER) measurement method was used to evaluate BER and packet error rate (PER) during 5 heavy thunderstorms on January 25 and March 17 to 20, 2011, respectively. In addition, BER measurements also were done on January 21 and March 30, 2011 under fair weather (FW) conditions providing a baseline for comparison. The Transmitter-Receiver separation was fixed at 10 meter with line-of- sight (LOS) consideration. We infer that lightning interfered with the transmitted digital pulses which resulted in a higher recorded BER. The maximum recorded BER was 9.9·10-1 and the average recorded BER and PER were 2.07·10-2 and 2.44·10-2 respectively during the thunderstorms with the average fair weather BER and PER values under the influence of adjacent channel interference (ACI) and co-channel interference (CCI) being 1.75·10-5 and 7.35·10-6 respectively. We conclude that multiple antennas wireless communication systems operating at the microwave frequency can be significantly interfered by lightning

IEEE Wireless LAN capacity in multicell environments with rate adaptation

Since the advent of the first IEEE 802.11 standard, many research efforts have been spent on evaluating different aspects of the specification. In this paper, we present a new method to predict the capacity of a multicell IEEE 802.11 network. The mechanism takes the effect of co-channel and adjacent channel interference into account. In addition, the study of a common rate adaptation algorithm is included. When the effect of rate adaptation is considered within the throughput computation, the results provided by our algorithm are closer to the measurements obtained in a real scenario. To the best of our knowledge, this paper presents the first analytical study of throughput performance including both types of interferences and the effect of bit rate adaptatio

Performance enhancement for LTE and beyond systems

A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Doctor of PhilosophyWireless communication systems have undergone fast development in recent years. Based on GSM/EDGE and UMTS/HSPA, the 3rd Generation Partnership Project (3GPP) specified the Long Term Evolution (LTE) standard to cope with rapidly increasing demands, including capacity, coverage, and data rate. To achieve this goal, several key techniques have been adopted by LTE, such as Multiple-Input and Multiple-Output (MIMO), Orthogonal Frequency-Division Multiplexing (OFDM), and heterogeneous network (HetNet). However, there are some inherent drawbacks regarding these techniques. Direct conversion architecture is adopted to provide a simple, low cost transmitter solution. The problem of I/Q imbalance arises due to the imperfection of circuit components; the orthogonality of OFDM is vulnerable to carrier frequency offset (CFO) and sampling frequency offset (SFO). The doubly selective channel can also severely deteriorate the receiver performance. In addition, the deployment of Heterogeneous Network (HetNet), which permits the co-existence of macro and pico cells, incurs inter-cell interference for cell edge users. The impact of these factors then results in significant degradation in relation to system performance. This dissertation aims to investigate the key techniques which can be used to mitigate the above problems. First, I/Q imbalance for the wideband transmitter is studied and a self-IQ-demodulation based compensation scheme for frequencydependent (FD) I/Q imbalance is proposed. This combats the FD I/Q imbalance by using the internal diode of the transmitter and a specially designed test signal without any external calibration instruments or internal low-IF feedback path. The instrument test results show that the proposed scheme can enhance signal quality by 10 dB in terms of image rejection ratio (IRR). In addition to the I/Q imbalance, the system suffers from CFO, SFO and frequency-time selective channel. To mitigate this, a hybrid optimum OFDM receiver with decision feedback equalizer (DFE) to cope with the CFO, SFO and doubly selective channel. The algorithm firstly estimates the CFO and channel frequency response (CFR) in the coarse estimation, with the help of hybrid classical timing and frequency synchronization algorithms. Afterwards, a pilot-aided polynomial interpolation channel estimation, combined with a low complexity DFE scheme, based on minimum mean squared error (MMSE) criteria, is developed to alleviate the impact of the residual SFO, CFO, and Doppler effect. A subspace-based signal-to-noise ratio (SNR) estimation algorithm is proposed to estimate the SNR in the doubly selective channel. This provides prior knowledge for MMSE-DFE and automatic modulation and coding (AMC). Simulation results show that this proposed estimation algorithm significantly improves the system performance. In order to speed up algorithm verification process, an FPGA based co-simulation is developed. Inter-cell interference caused by the co-existence of macro and pico cells has a big impact on system performance. Although an almost blank subframe (ABS) is proposed to mitigate this problem, the residual control signal in the ABS still inevitably causes interference. Hence, a cell-specific reference signal (CRS) interference cancellation algorithm, utilizing the information in the ABS, is proposed. First, the timing and carrier frequency offset of the interference signal is compensated by utilizing the cross-correlation properties of the synchronization signal. Afterwards, the reference signal is generated locally and channel response is estimated by making use of channel statistics. Then, the interference signal is reconstructed based on the previous estimate of the channel, timing and carrier frequency offset. The interference is mitigated by subtracting the estimation of the interference signal and LLR puncturing. The block error rate (BLER) performance of the signal is notably improved by this algorithm, according to the simulation results of different channel scenarios. The proposed techniques provide low cost, low complexity solutions for LTE and beyond systems. The simulation and measurements show good overall system performance can be achieved

Korkean luotettavuuden verkkohallinteiset laitteiden väliset yhteydet

Fifth generation cellular networks aim to provide new types of services. Prominent amongst these are industrial automation and vehicle-to-vehicle communications. Such new use cases demand lower latencies and higher reliability along with greater flexibility than current and past generations of cellular technologies allow. Enabling these new service types requires the introduction of device-to-device communications (D2D). This work investigated network-controlled D2D schemes wherein cellular base stations retain control over spectrum usage. D2D nodes assemble into clusters. Each D2D cluster then organises itself as it sees fit within the constraints imposed by the cellular network. A review of proposed D2D control schemes was conducted to identify pertinent interference issues. Measurements were then devised to empirically collect quantitative data on the impact of this interference. Measurements were conducted using a software-defined radio (SDR) platform. An SDR based system was selected to enable a low cost and highly flexible iterative approach to development while still providing the accuracy of real-world measurement. D2D functionality was added to the chosen SDR system with the essential parts of Long Term Evolution Release 8 implemented. Two series of measurements were performed. The first aimed to determine the adjacent channel interference impact of a cellular user being located near a D2D receiver. The second measurement series collected data on the co-channel interference of spectrum re-use between a D2D link and a moving cellular transmitter. Based on these measurements it was determined that D2D communications within a cellular system is feasible. Furthermore, the required frequency of channel state information reporting as a function of node velocity was determined.Viidennen sukupolven solukkoverkoilla pyritään mahdollistamaan uudentyyppisiä palveluja kuten teollisuusautomatiikkaa ja ajoneuvojen välistä viestintää. Tämänkaltaiset uudet käyttötarkoitukset vaativat lyhyempien viiveiden ja korkeammat luotettavuuden ohella myös suurempaa joustavuutta kuin minkä nykyisen sukupolven matkapuhelinverkkoteknologiat sallivat. Edellä mainittujen uusien palvelujen toteuttaminen vaatii suoria laitteiden välisiä yhteyksiä (engl. D2D). Tässä diplomityössä keskityttiin tutkimaan verkkohallinteisia D2D-rakenteita, joissa solukkoverkko hallinnoi spektrin käyttöä. D2D-päätteet liittyvät yhteen muodostaakseen klustereita, jotka hallinnoivat sisäistä tietoliikennettään parhaaksi katsomallaan tavalla solukkoverkon asettamien rajoitusten puitteissa. Kirjallisuuskatsauksen avulla selvitettiin aiemmissa tutkimuksissa esitetyille D2D-ratkaisuille yhteiset interferenssiongelmat. Näiden vaikutusta ja suuruutta tutkittiin mittausten avulla. Mittaukset toteutettiin ohjelmistoradioalustan (engl. SDR) avulla. SDR-pohjaisen järjestelmän käyttö mahdollisti edullisen ja joustavan tavan kerätä empiirisiä mittaustuloksia. D2D-toiminnallisuus lisättiin Long Term Evolution Release 8:n olennaiset ominaisuudet omaavaan alustaan. Tällä alustalla toteutettiin kaksi mittaussarjaa. Ensimmäisellä kerättiin tuloksia viereisellä kanavalla toimivan matkapuhelimen D2D-vastaanottimelle aiheuttamasta interferenssistä näiden ollessa toistensa läheisyydessä. Toisella mittaussarjalla selvitettiin samalla kanavalla toimivan D2D-yhteyden ja liikkuvan matkapuhelimen välistä interferenssiä. Mittausten perusteella todettiin D2D-toiminnallisuuden lisäämisen solukkoverkkoon olevan mahdollista. Lisäksi laskettiin vaadittava kanavalaadun päivitystiheys päätteiden nopeuden funktiona