Search Algorithms for Satisfiability Problems in Combinational Switching Circuits

A number of tasks in computer-aided analysis of combinational circuits, including test pattern generation, timing analysis, delay fault testing and logic verification, can be viewed as particular formulations of the satisfiability problem (SAT). The first purpose of this dissertation is to describe a configurable search-based algorithm for SAT that can be used for implementing different circuit analysis tools. Several methods for reducing the amount of search are detailed and integrated into a general algorithmic framework for solving SAT. Special emphasis is given to the description of methods for diagnosing the causes of conflicts that may be identified while searching for a solution to each instance of SAT. These methods allow the implementation of non-chronological backtracking, conflict identification based on equivalence relations and logic value assertions derived from conflicts. Path sensitization in combinational circuits is often used to solve test pattern generation, timing analysis and delay fault testing problems. While path sensitization can be cast as an instance of SAT, such an approach can conceal desirable structural properties of the problem and may lead to exponential size representations. Another purpose of this dissertation is to introduce a new model for path sensitization that permits modeling test pattern generation and timing analysis with linear size representations. In addition, this formulation for path sensitization permits the adaptation of all the pruning methods developed for the general SAT problem. The proposed SAT algorithms and path sensitization model form an initial kernel for the development of tools for the analysis of combinational circuits. Their practical applicability is supported by experimental results obtained with test pattern generation and timing analysis tools.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/104664/1/9542904.pdfDescription of 9542904.pdf : Restricted to UM users only

On Timing Model Extraction and Hierarchical Statistical Timing Analysis

In this paper, we investigate the challenges to apply Statistical Static Timing Analysis (SSTA) in hierarchical design flow, where modules supplied by IP vendors are used to hide design details for IP protection and to reduce the complexity of design and verification. For the three basic circuit types, combinational, flip-flop-based and latch-controlled, we propose methods to extract timing models which contain interfacing as well as compressed internal constraints. Using these compact timing models the runtime of full-chip timing analysis can be reduced, while circuit details from IP vendors are not exposed. We also propose a method to reconstruct the correlation between modules during full-chip timing analysis. This correlation can not be incorporated into timing models because it depends on the layout of the corresponding modules in the chip. In addition, we investigate how to apply the extracted timing models with the reconstructed correlation to evaluate the performance of the complete design. Experiments demonstrate that using the extracted timing models and reconstructed correlation full-chip timing analysis can be several times faster than applying the flattened circuit directly, while the accuracy of statistical timing analysis is still well maintained

Algorithmic Aspects of Cyclic Combinational Circuit Synthesis

Digital circuits are called combinational if they are memoryless: if they have outputs that depend only on the current values of the inputs. Combinational circuits are generally thought of as acyclic (i.e., feed-forward) structures. And yet, cyclic circuits can be combinational. Cycles sometimes occur in designs synthesized from high-level descriptions, as well as in bus-based designs [16]. Feedback in such cases is carefully contrived, typically occurring when functional units are connected in a cyclic topology. Although the premise of cycles in combinational circuits has been accepted, and analysis techniques have been proposed [7], no one has attempted the synthesis of circuits with feedback at the logic level. We have argued the case for a paradigm shift in combinational circuit design [10]. We should no longer think of combinational logic as acyclic in theory or in practice, since most combinational circuits are best designed with cycles. We have proposed a general methodology for the synthesis of multilevel networks with cyclic topologies and incorporated it in a general logic synthesis environment. In trials, benchmark circuits were optimized significantly, with improvements of up to 30%I n the area. In this paper, we discuss algorithmic aspects of cyclic circuit design. We formulate a symbolic framework for analysis based on a divide-and-conquer strategy. Unlike previous approaches, our method does not require ternary-valued simulation. Our analysis for combinationality is tightly coupled with the synthesis phase, in which we assemble a combinational network from smaller combinational components. We discuss the underpinnings of the heuristic search methods and present examples as well as synthesis results for benchmark circuits. In this paper, we discuss algorithmic aspects of cyclic circuit design. We formulate a symbolic framework for analysis based on a divide-and-conquer strategy. Unlike previous approaches, our method does not require ternary-valued simulation. Our analysis for combinationality is tightly coupled with the synthesis phase, in which we assemble a combinational network from smaller combinational components. We discuss the underpinnings of the heuristic search methods and present examples as well as synthesis results for benchmark circuits

Desynchronization: Synthesis of asynchronous circuits from synchronous specifications

Asynchronous implementation techniques, which measure logic delays at run time and activate registers accordingly, are inherently more robust than their synchronous counterparts, which estimate worst-case delays at design time, and constrain the clock cycle accordingly. De-synchronization is a new paradigm to automate the design of asynchronous circuits from synchronous specifications, thus permitting widespread adoption of asynchronicity, without requiring special design skills or tools. In this paper, we first of all study different protocols for de-synchronization and formally prove their correctness, using techniques originally developed for distributed deployment of synchronous language specifications. We also provide a taxonomy of existing protocols for asynchronous latch controllers, covering in particular the four-phase handshake protocols devised in the literature for micro-pipelines. We then propose a new controller which exhibits provably maximal concurrency, and analyze the performance of desynchronized circuits with respect to the original synchronous optimized implementation. We finally prove the feasibility and effectiveness of our approach, by showing its application to a set of real designs, including a complete implementation of the DLX microprocessor architectur

Empirical timing analysis of CPUs and delay fault tolerant design using partial redundancy

The operating clock frequency is determined by the longest signal propagation delay, setup/hold time, and timing margin. These are becoming less predictable with the increasing design complexity and process miniaturization. The difficult challenge is then to ensure that a device operating at its clock frequency is error-free with quantifiable assurance. Effort at device-level engineering will not suffice for these circuits exhibiting wide process variation and heightened sensitivities to operating condition stress. Logic-level redress of this issue is a necessity and we propose a design-level remedy for this timing-uncertainty problem. The aim of the design and analysis approaches presented in this dissertation is to provide framework, SABRE, wherein an increased operating clock frequency can be achieved. The approach is a combination of analytical modeling, experimental analy- sis, hardware /time-redundancy design, exception handling and recovery techniques. Our proposed design replicates only a necessary part of the original circuit to avoid high hardware overhead as in triple-modular-redundancy (TMR). The timing-critical combinational circuit is path-wise partitioned into two sections. The combinational circuits associated with long paths are laid out without any intrusion except for the fan-out connections from the first section of the circuit to a replicated second section of the combinational circuit. Thus only the second section of the circuit is replicated. The signals fanning out from the first section are latches, and thus are far shorter than the paths spanning the entire combinational circuit. The replicated circuit is timed at a subsequent clock cycle to ascertain relaxed timing paths. This insures that the likelihood of mistiming due to stress or process variation is eliminated. During the subsequent clock cycle, the outcome of the two logically identical, yet time-interleaved, circuit outputs are compared to detect faults. When a fault is detected, the retry sig- nal is triggered and the dynamic frequency-step-down takes place before a pipe flush, and retry is issued. The significant timing overhead associated with the retry is offset by the rarity of the timing violation events. Simulation results on ISCAS Benchmark circuits show that 10% of clock frequency gain is possible with 10 to 20 % of hardware overhead of replicated timing-critical circuit