Tactical communication systems based on civil standards: Modeling in the MiXiM framework

In this paper, new work is presented belonging to an ongoing study, which evaluates civil communication standards as potential candidates for the future military Wide Band Waveforms (WBWFs). After an evaluation process of possible candidates presented in [2], the selection process in [1] showed that the IEEE 802.11n OFDM could be a possible military WBWF candidate, but it should be further investigated first in order to enhance or even replace critical modules. According to this, some critical modules of the physical layer has been further analyzed in [3] regarding the susceptibility of the OFDM signal under jammer influences. However, the critical modules of the MAC layer (e.g., probabilistic medium access CSMA/CA) have not been analysed. In fact, it was only suggested in [2] to replace this medium access by the better suited Unified Slot Allocation Protocol - Multiple Access (USAP-MA) [4]. In this regard, the present contribution describes the design paradigms of the new MAC layer and explains how the proposed WBWF candidate has been modelled within the MiXiM Framework of the OMNeT++ simulator.Comment: Published in: A. F\"orster, C. Sommer, T. Steinbach, M. W\"ahlisch (Eds.), Proc. of 1st OMNeT++ Community Summit, Hamburg, Germany, September 2, 2014, arXiv:1409.0093, 201

QoS Supportive MAC Protocols for WSNs: Review and Evaluation

The use of wireless sensor networks technology is growing in different applications of monitoring. Since it is a relatively new technology, the interest of researchers to improve the network performance and behaviour has been enormous. In this context, new resource allocation scheme that takes into account traffic priority and load has been introduced. The evaluation of this scheme is intended to be achieved by implementing a custom simulator. This report discusses and evaluates all the important concerns needed to be considered during the development of this project. Moreover, this work also reviews the related literature in order to afford optimisations to the scheme

Simulating Cellular Communications in Vehicular Networks: Making SimuLTE Interoperable with Veins

The evolution of cellular technologies toward 5G progressively enables efficient and ubiquitous communications in an increasing number of fields. Among these, vehicular networks are being considered as one of the most promising and challenging applications, requiring support for communications in high-speed mobility and delay-constrained information exchange in proximity. In this context, simulation frameworks under the OMNeT++ umbrella are already available: SimuLTE and Veins for cellular and vehicular systems, respectively. In this paper, we describe the modifications that make SimuLTE interoperable with Veins and INET, which leverage the OMNeT++ paradigm, and allow us to achieve our goal without any modification to either of the latter two. We discuss the limitations of the previous solution, namely VeinsLTE, which integrates all three in a single framework, thus preventing independent evolution and upgrades of each building block.Comment: Published in: A. Foerster, A. Udugama, A. Koensgen, A. Virdis, M. Kirsche (Eds.), Proc. of the 4th OMNeT++ Community Summit, University of Bremen - Germany - September 7-8, 201

An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks

Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful energy awareness is essential when working with these devices. Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features. This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols. The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference publications in IEEE Explore and one workshop paper

Simulating device-to-device communications in OMNeT++ with SimuLTE: scenarios and configurations

SimuLTE is a tool that enables system-level simulations of LTE/LTE-Advanced networks within OMNeT++. It is designed such that it can be plugged within network elements as an additional Network Interface Card (NIC) to those already provided by the INET framework (e.g. Wi-Fi). Recently, device-to-device (D2D) technology has been widely studied by the research community, as a mechanism to allow direct communications between devices of a LTE cellular network. In this work, we present how SimuLTE can be employed to simulate both one-to-one and one-to-many D2D communications, so that the latter can be exploited as a new communication opportunity in several research fields, like vehicular networks, IoT and machine-to-machine (M2M) applications

Simu5G – An OMNeT++ library for end-to-end performance evaluation of 5G networks

In this paper we introduce Simu5G, a new OMNeT++-based model library to simulate 5G networks. Si-mu5G allows users to simulate the data plane of 5G New Radio deployments, in an end-to-end perspective and including all protocol layers, making it a valuable tool for researchers and practitioners interested in the performance evaluation of 5G networks and services. We discuss the modelling of the protocol layers, network entities and functions, and validate our abstraction of the physical layer using 3GPP-based sce-narios. Moreover, we show how Simu5G can be used to evaluate Multi-access Edge Computing (MEC) and Cellular Vehicle-to-everything (C-V2X) services offered through a 5G network

Modeling network-controlled device-to-device communications in SimuLTE

In Long Term Evolution-Advanced (LTE-A), network-controlled device-to-device (D2D) communications allow User Equipments (UEs) to communicate directly, without involving the Evolved Node-B in data relaying, while the latter still retains control of resource allocation. The above paradigm allows reduced latencies for the UEs and increased resource efficiency for the network operator, and is therefore foreseen to support several services, from Machine-to-machine to vehicular communications. D2D communications introduce research challenges that might affect the performance of applications and upper-layer protocols, hence simulations represent a valuable tool for evaluating these aspects. However, simulating D2D features might pose additional com-putational burden to the simulation environment. To this aim, a careful modeling is required in order to reduce computational overhead. In this paper we describe our modeling of net-work-controlled D2D communications in SimuLTE, a system-level LTE-A simulation library based on OMNeT++. We describe the core modeling choices of SimuLTE, and show how these allow an easy extension to D2D communications. Moreover, we describe in detail the modeling of specific problems arising with D2D communications, such as scheduling with frequency reuse, connection mode switching and broadcast transmission. We document the computational efficiency of our modeling choices, showing that simulation of D2D communications is not more complex than simulation of classical cellular communications of comparable scale. Results show that the heaviest computational burden of D2D communication lies in estimating the Sidelink channel quality. We show that SimuLTE allows one to evaluate the interplay between D2D communication and end-to-end performance of UDP- and TCP-based services. Moreover, we assess the accuracy of using a binary interference model for frequency reuse, and we evaluate the trade-off between speed of execution and accuracy in modeling the reception probability