Parallel-Interference-Cancellation-Assisted Decision-Directed Channel Estimation for OFDM Systems using Multiple Transmit Antennas

The number of transmit antennas that can be employed in the context of least-squares (LS) channel estimation contrived for orthogonal frequency division multiplexing (OFDM) systems employing multiple transmit antennas is limited by the ratio of the number of subcarriers and the number of significant channel impulse response (CIR)-related taps. In order to allow for more complex scenarios in terms of the number of transmit antennas and users supported, CIR-related tap prediction-filtering-based parallel interference cancellation (PIC)-assisted decision-directed channel estimation (DDCE) is investigated. New explicit expressions are derived for the estimator’s mean-square error (MSE), and a new iterative procedure is devised for the offline optimization of the CIR-related tap predictor coefficients. These new expressions are capable of accounting for the estimator’s novel recursive structure. In the context of our performance results, it is demonstrated, for example, that the estimator is capable of supporting L = 16 transmit antennas, when assuming K = 512 subcarriers and K0 = 64 significant CIR taps, while LS-optimized DDCE would be limited to employing L = 8 transmit antennas. Index Terms—Decision-directed channel estimation (DDCE), multiple transmit antennas, orthogonal frequency division multiplexing (OFDM), parallel interference cancellation (PIC)

Diversity gain for DVB-H by using transmitter/receiver cyclic delay diversity

The objective of this paper is to investigate different diversity techniques for broadcast networks that will minimize the complexity and improve received SNR of broadcast systems. Resultant digital broadcast networks would require fewer transmitter sites and thus be more cost-effective and have less environmental impact. The techniques can be applied to DVB-T, DVB-H and DAB systems that use Orthogonal Frequency Division Multplexing (OFDM). These are key radio broadcast network technologies, which are expected to complement emerging technologies such as WiMAX and future 4G networks for delivery of broadband content. Transmitter and receiver diversity technologies can increase the frequency and time selectivity of the resulting channel transfer function at the receiver. Diversity exploits the statistical nature of fading due to multipath and reduces the likelihood of deep fading by providing a diversity of transmission signals. Multiple signals are transmitted in such a way as to ensure that several signals reach the receiver each with uncorrelated fading. Transmit diversity is more practical than receive diversity due to the difficulty of locating two receive antennas far enough apart in a small mobile device. The schemes examined here comply with existing DVB standards and can be incorporated into existing systems without change. The diversity techniques introduced in this paper are applied to the DVB-H system. Bit error performance investigations were conducted by simulation for different DVB-H and diversity parameters

New Fast Transform for Orthogonal Frequency Division Multiplexing

In this paper, a new fast and low complexity transform is introduced for orthogonal frequency division multiplexing (OFDM) wireless systems. The new transform combines the effects of fast complex-Walsh-Hadamard transform (CHT) and the fast Fourier transform (FFT) into a single unitary transform named in this paper as the complex transition transform (CTT). The development of a new algorithm for fast calculation of the CT transform called FCT is found to have all the desirable properties such as in-place computation, simple indexing scheme and considerably lower arithmetic complexity than existing algorithms. Furthermore, a new OFDM system using the FCT algorithm is introduced and its performance has been evaluated. The proposed CT-OFDM achieves a noticeable reduction in peak-to-average-power-ratio (PAPR) and a significant improvement in the bit-error-rate (BER) performance compared with the conventional OFDM.Comment: 12 pages, 8 figures, 1 tabl

An Iterative Receiver for OFDM With Sparsity-Based Parametric Channel Estimation

In this work we design a receiver that iteratively passes soft information between the channel estimation and data decoding stages. The receiver incorporates sparsity-based parametric channel estimation. State-of-the-art sparsity-based iterative receivers simplify the channel estimation problem by restricting the multipath delays to a grid. Our receiver does not impose such a restriction. As a result it does not suffer from the leakage effect, which destroys sparsity. Communication at near capacity rates in high SNR requires a large modulation order. Due to the close proximity of modulation symbols in such systems, the grid-based approximation is of insufficient accuracy. We show numerically that a state-of-the-art iterative receiver with grid-based sparse channel estimation exhibits a bit-error-rate floor in the high SNR regime. On the contrary, our receiver performs very close to the perfect channel state information bound for all SNR values. We also demonstrate both theoretically and numerically that parametric channel estimation works well in dense channels, i.e., when the number of multipath components is large and each individual component cannot be resolved.Comment: Major revision, accepted for IEEE Transactions on Signal Processin

Performance Analysis of Discrete Wavelet Multitone Transceiver for Narrowband PLC in Smart Grid

Smart Grid is an abstract idea, which involves the utilization of powerlines for sensing, measurement, control and communication for efficient utilization and distribution of energy, as well as automation of meter reading, load management and capillary control of Green Energy resources connected to the grid. Powerline Communication (PLC) has assumed a new role in the Smart Grid scenario, adopting the narrowband PLC (NB-PLC) for a low cost and low data rate communication for applications such as, automatic meter reading, dynamic management of load, etc. In this paper, we have proposed and simulated a discrete wavelet multitone (DWMT) transceiver in the presence of impulse noise for the NB-PLC channel applications in Smart Grid. The simulation results show that a DWMT transceiver outperforms a DFT-DMT with reference to the bit error rate (BER) performance

Bit error rate analysis of different digital modulation schemes in orthogonal frequency division multiplexing systems

This study presents the design of an orthogonal frequency division multiplexing (OFDM) system and analyses the performance of the different digital modulation techniques employed in the system. The OFDM system was modelled and different modulation schemes: M-ary phase shift keying (M-PSK) and M-ary quadrature amplitude modulation (M-QAM) were employed over two different channels: additive white Gaussian noise (AWGN), and Rayleigh multipath fading channels. Bit error rate (BER) analysis was carried out for the different digital modulation schemes over the two channels, and the number of fast Fourier transform (FFT) points used during the transmission was examined. Generally, results showed that over both AWGN and Rayleigh fading channels, lower order modulation schemes perform better than the higher order schemes. This comes at the detriment of the data rate, as lower order schemes have lower data rates compared with their higher order counterparts. In addition, it was observed that the system performed better over AWGN channel than Rayleigh fading channel for all modulation schemes used. On the number of FFT points used during the transmission, findings revealed that the performance of the system is more or less not really affected by the number of FFT points employed during transmission.Key words: Digital modulation, bit error rate, orthogonal frequency division multiplexing, additive white Gaussian noise, modulation schemes, fast Fourier transform

Performance evaluation of fixed WiMax physical layer under high fading channels

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.A radio channel characteristic modelling is essential in every network planning. This project deals with the performance of WiMax networks in an outdoor environment while using fading channel models. The radio channels characteristics are analyzed by simulations have been done using Matlab programming. Stanford University Interim(SUI) Channels set was proposed to simulate the fixed broadband wireless access channel environments where IEEE 802.16d is to be deployed. It has six channel models that are grouped into three categories according to three typical different outdoor Terrains, in order to give a comprehensive study of fading channels on the overall performance of the system, WiMax system has been tested under SUI channels that modified into account for 30o directional antennas, with 90% cell coverage and with 99.9% reliability in its geographical covered area. Furthermore, in order to combat the fading which occurs in urban areas and improve the capacity and the throughput of the system, multiples antennas at both ends of communication link are used, the transmission gain obtained when using multiple antennas instead of only a single antenna. Space-time coding and maximum ratio combining for more than one transmit and receive antenna is implemented to allow performance investigations in various MIMO scenarios. It has been concluded that uses multiple antennas at the receiver offers a significant improvement of 3 dB of gain in the channel SNR. This thesis also contain implementation of all compulsory features of the WiMax OFDM physical layer specified in IEEE 802.16-2004 using Matlab coding. In order to combat the temporal variations in quality on a multipath fading channel, an adaptive modulation technique is used. This technique employs multiple modulation schemes to instantaneously adapt to the variations in the channel SNR, thus maximizing the system throughput and improving BER performance. WiMax transceiver has been tested with and without encoding and studied the effect of encoding on multipath channel. Testing the system with flexible channel bandwidth has been part of this thesis. Finally it has been explained in this thesis the affect of increasing the size of cyclic prefix on overall performance of WiMax system