2,820 research outputs found
Reducing false wake-up in contention-based wake-up control of wireless LANs
This paper studies the potential problem and performance when tightly integrating a low power wake-up radio (WuR) and a power-hungry wireless LAN (WLAN) module for energy efficient channel access. In this model, a WuR monitors the channel, performs carrier sense, and activates its co-located WLAN module when the channel becomes ready for transmission. Different from previous methods, the node that will be activated is not decided in advance, but decided by distributed contention. Because of the wake-up latency of WLAN modules, multiple nodes may be falsely activated, except the node that will actually transmit. This is called a false wake-up problem and it is solved from three aspects in this work: (i) resetting backoff counter of each node in a way as if it is frozen in a wake-up period, (ii) reducing false wake-up time by immediately putting a WLAN module into sleep once a false wake-up is inferred, and (iii) reducing false wake-up probability by adjusting contention window. Analysis shows that false wake-ups, instead of collisions, become the dominant energy overhead. Extensive simulations confirm that the proposed method (WuR-ESOC) effectively reduces energy overhead, by up to 60% compared with state-of-the-arts, achieving a better tradeoff between throughput and energy consumption
Capacity Analysis of IEEE 802.11ah WLANs for M2M Communications
Focusing on the increasing market of the sensors and actuators networks, the
IEEE 802.11ah Task Group is currently working on the standardization of a new
amendment. This new amendment will operate at the sub-1GHz band, ensure
transmission ranges up to 1 Km, data rates above 100 kbps and very low power
operation. With IEEE 802.11ah, the WLANs will offer a solution for applications
such as smart metering, plan automation, eHealth or surveillance. Moreover,
thanks to a hierarchical signalling, the IEEE 802.11ah will be able to manage a
higher number of stations (STAs) and improve the 802.11 Power Saving
Mechanisms. In order to support a high number of STAs, two different signalling
modes are proposed, TIM and Non-TIM Offset. In this paper we present a
theoretical model to predict the maximum number of STAs supported by both modes
depending on the traffic load and the data rate used. Moreover, the IEEE
802.11ah performance and energy consumption for both signalling modes and for
different traffic patterns and data rates is evaluated. Results show that both
modes achieve similar Packet Delivery Ratio values but the energy consumed with
the TIM Offset is, in average, a 11.7% lower.Comment: Multiple Access Communications 201
A novel multipath-transmission supported software defined wireless network architecture
The inflexible management and operation of today\u27s wireless access networks cannot meet the increasingly growing specific requirements, such as high mobility and throughput, service differentiation, and high-level programmability. In this paper, we put forward a novel multipath-transmission supported software-defined wireless network architecture (MP-SDWN), with the aim of achieving seamless handover, throughput enhancement, and flow-level wireless transmission control as well as programmable interfaces. In particular, this research addresses the following issues: 1) for high mobility and throughput, multi-connection virtual access point is proposed to enable multiple transmission paths simultaneously over a set of access points for users and 2) wireless flow transmission rules and programmable interfaces are implemented into mac80211 subsystem to enable service differentiation and flow-level wireless transmission control. Moreover, the efficiency and flexibility of MP-SDWN are demonstrated in the performance evaluations conducted on a 802.11 based-testbed, and the experimental results show that compared to regular WiFi, our proposed MP-SDWN architecture achieves seamless handover and multifold throughput improvement, and supports flow-level wireless transmission control for different applications
- …