An Elitist Non-Dominated Multi-Objective Genetic Algorithm Based Temperature Aware Circuit Synthesis

At sub-nanometre technology, temperature is one of the important design parameters to be taken care of during the target implementation for the circuit for its long term and reliable operation. High device package density leads to high power density that generates high temperatures. The temperature of a chip is directly proportional to the power density of the chip. So, the power density of a chip can be minimized to reduce the possibility of the high temperature generation. Temperature minimization approaches are generally addressed at the physical design level but it incurs high cooling cost. To reduce the cooling cost, the temperature minimization approaches can be addressed at the logic level. In this work, the Non-Dominated Sorting Genetic Algorithm-II (NSGA-II) based multi-objective heuristic approach is proposed to select the efficient input variable polarity of Mixed Polarity Reed-Muller (MPRM) expansion for simultaneous optimization of area, power, and temperature. A Pareto optimal solution set is obtained from the vast solution set of 3n (‘n’ is the number of input variables) different polarities of MPRM. Tabular technique is used for input polarity conversion from Sum-of-Product (SOP) form to MPRM form. Finally, using CADENCE and HotSpot tool absolute temperature, silicon area and power consumption of the synthesized circuits are calculated and are reported. The proposed algorithm saves around 76.20% silicon area, 29.09% power dissipation and reduces 17.06% peak temperature in comparison with the reported values in the literature

Computer aided synthesis and optimisation of electronic logic circuits

In this thesis, a variety of algorithms for synthesis and optimisation of combinational and sequential logic circuits are developed. These algorithms could be part of new commercial EGAD package for future VLSI digital designs. The results show that considerable saving in components can be achieved resulting in simpler designs that are smaller, cheaper, consume less power and easier to test. The purpose of generating different sets of coefficients related to Reed Muller (RM) is that they contain different number of terms; therefore the minimum one can be selected to design the circuits with reduced gate count. To widen the search space and achieve better synthesis tools, representations of Mixed Polarity Reed Muller (MPRM), Mixed Polarity Dual Reed Muller (MPDRM), and Pseduo Kronecker Reed Muller (PKRO RM) expansions are investigated. Efficient and fast combinatorial techniques and algorithms are developed for the following: â Bidirectional conversion between MPRM/ MPDRM form and Fixed Polarity Reed Muller forms (FPRM)/Fixed Polarity Dual Reed Muller forms (FPDRM) form respectively. The main advantages for these techniques are their simplicity and suitability for single and multi output Boolean functions. â Computing the coefficients of any polarity related to PKRO_RM class starting from FPRM coefficients or Canonical Sum of Products (CSOP). â Computing the coefficients of any polarity related to MPRM/or MPDRM directly from standard form of CSOP/Canonical Product of sums (CPOS) Boolean functions, respectively. The proposed algorithms are efficient in terms of CPU time and can be used for large functions. For optimisation of combinational circuits, new techniques and algorithms based on algebraic techniques are developed which can be used to generate reduced RM expressions to design circuits in RM/DRM domain starting from FPRM/FPDRM, respectively. The outcome for these techniques is expansion in Reed Muller domain with minimal terms. The search space is 3`" Exclusive OR Sum of Product (ESOP)/or Exclusive NOR Product of Sums (ENPOS) expansions. Genetic Algorithms (GAs) are also developed to optimise combinational circuits to find optimal MPRM/MPDRM among 3° different polarities without the need to do exhaustive search. These algorithms are developed for completely and incompletely specified Boolean functions. The experimental results show that GA can find optimum solutions in a short time compared with long time required running exhaustive search in all the benchmarks tested. Multi Objective Genetic Algorithm (MOGA) is developed and implemented to determine the optimal state assignment which results in less area and power dissipation for completely and incompletely specified sequential circuits. The goal is to find the best assignments which reduce the component count and switching activity simultaneously. The experimental results show that saving in components and switching activity are achieved in most of the benchmarks tested compared with recently published research. All algorithms are implemented in C++.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Algorithms in computer-aided design of VLSI circuits.

With the increased complexity of Very Large Scale Integrated (VLSI) circuits,Computer Aided Design (CAD) plays an even more important role. Top-downdesign methodology and layout of VLSI are reviewed. Moreover, previouslypublished algorithms in CAD of VLSI design are outlined.In certain applications, Reed-Muller (RM) forms when implemented withAND/XOR or OR/XNOR logic have shown some attractive advantages overthe standard Boolean logic based on AND/OR logic. The RM forms implementedwith OR/XNOR logic, known as Dual Forms of Reed-Muller (DFRM),is the Dual form of traditional RM implemented with AND /XOR.Map folding and transformation techniques are presented for the conversionbetween standard Boolean and DFRM expansions of any polarity. Bidirectionalmulti-segment computer based conversion algorithms are also proposedfor large functions based on the concept of Boolean polarity for canonicalproduct-of-sums Boolean functions. Furthermore, another two tabular basedconversion algorithms, serial and parallel tabular techniques, are presented forthe conversion of large functions between standard Boolean and DFRM expansionsof any polarity. The algorithms were tested for examples of up to 25variables using the MCNC and IWLS'93 benchmarks.Any n-variable Boolean function can be expressed by a Fixed PolarityReed-Muller (FPRM) form. In order to have a compact Multi-level MPRM(MMPRM) expansion, a method called on-set table method is developed.The method derives MMPRM expansions directly from FPRM expansions.If searching all polarities of FPRM expansions, the MMPRM expansions withthe least number of literals can be obtained. As a result, it is possible to findthe best polarity expansion among 2n FPRM expansions instead of searching2n2n-1 MPRM expansions within reasonable time for large functions. Furthermore,it uses on-set coefficients only and hence reduces the usage of memorydramatically.Currently, XOR and XNOR gates can be implemented into Look-Up Tables(LUT) of Field Programmable Gate Arrays (FPGAs). However, FPGAplacement is categorised to be NP-complete. Efficient placement algorithmsare very important to CAD design tools. Two algorithms based on GeneticAlgorithm (GA) and GA with Simulated Annealing (SA) are presented for theplacement of symmetrical FPGA. Both of algorithms could achieve comparableresults to those obtained by Versatile Placement and Routing (VPR) toolsin terms of the number of routing channel tracks

Computer aided synthesis and optimisation of electronic logic circuits

In this thesis, a variety of algorithms for synthesis and optimisation of combinational and sequential logic circuits are developed. These algorithms could be part of new commercial EGAD package for future VLSI digital designs. The results show that considerable saving in components can be achieved resulting in simpler designs that are smaller, cheaper, consume less power and easier to test.The purpose of generating different sets of coefficients related to Reed Muller (RM) is that they contain different number of terms; therefore the minimum one can be selected to design the circuits with reduced gate count. To widen the search space and achieve better synthesis tools, representations of Mixed Polarity Reed Muller (MPRM), Mixed Polarity Dual Reed Muller (MPDRM), and Pseduo Kronecker Reed Muller (PKRO RM) expansions are investigated. Efficient and fast combinatorial techniques and algorithms are developed for the following:- Bidirectional conversion between MPRM/ MPDRM form and Fixed Polarity Reed Muller forms (FPRM)/Fixed Polarity Dual Reed Muller forms (FPDRM) form respectively. The main advantages for these techniques are their simplicity and suitability for single and multi output Boolean functions.- Computing the coefficients of any polarity related to PKRO_RM class starting from FPRM coefficients or Canonical Sum of Products (CSOP).- Computing the coefficients of any polarity related to MPRM/or MPDRM directly from standard form of CSOP/Canonical Product of sums (CPOS) Boolean functions, respectively. The proposed algorithms are efficient in terms of CPU time and can be used for large functions.For optimisation of combinational circuits, new techniques and algorithms based on algebraic techniques are developed which can be used to generate reduced RM expressions to design circuits in RM/DRM domain starting from FPRM/FPDRM, respectively. The outcome for these techniques is expansion in Reed Muller domain with minimal terms. The search space is 3`" Exclusive OR Sum of Product (ESOP)/or Exclusive NOR Product of Sums (ENPOS) expansions.Genetic Algorithms (GAs) are also developed to optimise combinational circuits to find optimal MPRM/MPDRM among 3° different polarities without the need to do exhaustive search. These algorithms are developed for completely and incompletely specified Boolean functions. The experimental results show that GA can find optimum solutions in a short time compared with long time required running exhaustive search in all the benchmarks tested.Multi Objective Genetic Algorithm (MOGA) is developed and implemented to determine the optimal state assignment which results in less area and power dissipation for completely and incompletely specified sequential circuits. The goal is to find the best assignments which reduce the component count and switching activity simultaneously. The experimental results show that saving in components and switchingactivity are achieved in most of the benchmarks tested compared with recentlypublished research. All algorithms are implemented in C++