MRAM-Based FPGAs: A Survey

Over the last decade, field programmable gate arrays (FPGAs) have embraced heterogeneity in a transformative way by leveraging emerging memory devices along with conventional CMOS-based devices to realize technology-specific benefits. Memristive device technologies exhibit desirable characteristics such as non-volatility, scalability, near-zero leakage, radiation hardness, and more, making them promising alternatives for SRAM cells found in conventional SRAM-based FPGAs. In recent years, a significant amount of research has been performed to take advantage of these emerging technologies to develop fundamental building blocks of FPGAs like hybrid CMOS-memristive look-up tables (LUTs) and configurable logic blocks (CLBs). In this chapter, we will provide a brief overview of the previous work on hybrid CMOS-memristive FPGAs and their corresponding opportunities and challenges

Applications of memristors in conventional analogue electronics

This dissertation presents the steps employed to activate and utilise analogue memristive devices in conventional analogue circuits and beyond. TiO2 memristors are mainly utilised in this study, and their large variability in operation in between similar devices is identified. A specialised memristor characterisation instrument is designed and built to mitigate this issue and to allow access to large numbers of devices at a time. Its performance is quantified against linear resistors, crossbars of linear resistors, stand-alone memristive elements and crossbars of memristors. This platform allows for a wide range of different pulsing algorithms to be applied on individual devices, or on crossbars of memristive elements, and is used throughout this dissertation. Different ways of achieving analogue resistive switching from any device state are presented. Results of these are used to devise a state-of-art biasing parameter finder which automatically extracts pulsing parameters that induce repeatable analogue resistive switching. IV measurements taken during analogue resistive switching are then utilised to model the internal atomic structure of two devices, via fittings by the Simmons tunnelling barrier model. These reveal that voltage pulses modulate a nano-tunnelling gap along a conical shape. Further retention measurements are performed which reveal that under certain conditions, TiO2 memristors become volatile at short time scales. This volatile behaviour is then implemented into a novel SPICE volatile memristor model. These characterisation methods of solid-state devices allowed for inclusion of TiO2 memristors in practical electronic circuits. Firstly, in the context of large analogue resistive crossbars, a crosspoint reading method is analysed and improved via a 3-step technique. Its scaling performance is then quantified via SPICE simulations. Next, the observed volatile dynamics of memristors are exploited in two separate sequence detectors, with applications in neuromorphic engineering. Finally, the memristor as a programmable resistive weight is exploited to synthesise a memristive programmable gain amplifier and a practical memristive automatic gain control circuit.Open Acces

Resistive Switching in Silicon-rich Silicon Oxide

Over the recent decade, many different concepts of new emerging memories have been proposed. Examples of such include ferroelectric random access memories (FeRAMs), phase-change RAMs (PRAMs), resistive RAMs (RRAMs), magnetic RAMs (MRAMs), nano-crystal floating-gate flash memories, among others. The ultimate goal for any of these memories is to overcome the limitations of dynamic random access memories (DRAM) and flash memories. Non-volatile memories exploiting resistive switching – resistive RAM (RRAM) devices – offer the possibility of low programming energy per bit, rapid switching, and very high levels of integration – potentially in 3D. Resistive switching in a silicon-based material offers a compelling alternative to existing metal oxide-based devices, both in terms of ease of fabrication, but also in enhanced device performance. In this thesis I demonstrate a redox-based resistive switch exploiting the formation of conductive filaments in a bulk silicon-rich silicon oxide. My devices exhibit multi-level switching and analogue modulation of resistance as well as standard two-level switching. I demonstrate different operational modes (bipolar and unipolar switching modes) that make it possible to dynamically adjust device properties, in particular two highly desirable properties: non-linearity and self-rectification. Scanning tunnelling microscopy (STM), atomic force microscopy (AFM), and conductive atomic force microscopy (C-AFM) measurements provide a more detailed insight into both the location and the dimensions of the conductive filaments. I discuss aspects of conduction and switching mechanisms and we propose a physical model of resistive switching. I demonstrate room temperature quantisation of conductance in silicon oxide resistive switches, implying ballistic transport of electrons through a quantum constriction, associated with an individual silicon filament in the SiOx bulk. I develop a stochastic method to simulate microscopic formation and rupture of conductive filaments inside an oxide matrix. I use the model to discuss switching properties – endurance and switching uniformity

SiOx-based resistive switching memory integrated in nanopillar structure fabricated by nanosphere lithography

textA highly compact, one diode-one resistor (1D-1R) SiOx-based resistive switching memory device with nano-pillar architecture has been achieved for the first time using nano-sphere lithography. The average nano-pillar height and diameter are 1.3 μm and 130 nm, respectively. Low-voltage electroforming using DC bias and AC pulse response in the 50ns regime demonstrate good potential for high-speed, low-energy nonvolatile memory. Nano-sphere deposition, oxygen-plasma isolation, and nano-pillar formation by deep-Si-etching are studied and optimized for the 1D-1R configurations. Excellent electrical performance, data retention and the potential for wafer-scale integration are promising for future non-volatile memory applications.Materials Science and Engineerin

Nouvelles Architectures Hybrides (Logique / Mémoires Non-Volatiles et technologies associées.)

Les nouvelles approches de technologies mémoires permettront une intégration dite back-end, où les cellules élémentaires de stockage seront fabriquées lors des dernières étapes de réalisation à grande échelle du circuit. Ces approches innovantes sont souvent basées sur l'utilisation de matériaux actifs présentant deux états de résistance distincts. Le passage d'un état à l'autre est contrôlé en courant ou en tension donnant lieu à une caractéristique I-V hystérétique. Nos mémoires résistives sont composées d'argent en métal électrochimiquement actif et de sulfure amorphe agissant comme électrolyte. Leur fonctionnement repose sur la formation réversible et la dissolution d'un filament conducteur. Le potentiel d'application de ces nouveaux dispositifs n'est pas limité aux mémoires ultra-haute densité mais aussi aux circuits embarqués. En empilant ces mémoires dans la troisième dimension au niveau des interconnections des circuits logiques CMOS, de nouvelles architectures hybrides et innovantes deviennent possibles. Il serait alors envisageable d'exploiter un fonctionnement à basse énergie, à haute vitesse d'écriture/lecture et de haute performance telles que l'endurance et la rétention. Dans cette thèse, en se concentrant sur les aspects de la technologie de mémoire en vue de développer de nouvelles architectures, l'introduction d'une fonctionnalité non-volatile au niveau logique est démontrée par trois circuits hybrides: commutateurs de routage non volatiles dans un Field Programmable Gate Arrays, un 6T-SRAM non volatile, et les neurones stochastiques pour un réseau neuronal. Pour améliorer les solutions existantes, les limitations de la performances des dispositifs mémoires sont identifiés et résolus avec des nouveaux empilements ou en fournissant des défauts de circuits tolérants.Novel approaches in the field of memory technology should enable backend integration, where individual storage nodes will be fabricated during the last fabrication steps of the VLSI circuit. In this case, memory operation is often based upon the use of active materials with resistive switching properties. A topology of resistive memory consists of silver as electrochemically active metal and amorphous sulfide acting as electrolyte and relies on the reversible formation and dissolution of a conductive filament. The application potential of these new memories is not limited to stand-alone (ultra-high density), but is also suitable for embedded applications. By stacking these memories in the third dimension at the interconnection level of CMOS logic, new ultra-scalable hybrid architectures becomes possible which exploit low energy operation, fast write/read access and high performance with respect to endurance and retention. In this thesis, focusing on memory technology aspects in view of developing new architectures, the introduction of non-volatile functionality at the logic level is demonstrated through three hybrid (CMOS logic ReRAM devices) circuits: nonvolatile routing switches in a Field Programmable Gate Array, nonvolatile 6T-SRAMs, and stochastic neurons of an hardware neural network. To be competitive or even improve existing solutions, limitations on the memory devices performances are identified and solved by stack engineering of CBRAM devices or providing faults tolerant circuits.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Memristors for the Curious Outsiders

We present both an overview and a perspective of recent experimental advances and proposed new approaches to performing computation using memristors. A memristor is a 2-terminal passive component with a dynamic resistance depending on an internal parameter. We provide an brief historical introduction, as well as an overview over the physical mechanism that lead to memristive behavior. This review is meant to guide nonpractitioners in the field of memristive circuits and their connection to machine learning and neural computation.Comment: Perpective paper for MDPI Technologies; 43 page

Design and Architectural Assessment of 3-D Resistive Memory Technologies in FPGAs

Emerging Non-Volatile Memories (eNVMs) such as Phase-Change RAMs (PCRAMs) or Oxide-based Resistive RAMs (OxRRAMs) are promising candidates to replace Flash and Static Random Access Memories in many applications. This paper introduces a novel set of building blocks for Field-Programmable Gate Arrays (FPGAs) using eNVMs. We propose an eNVM-based configuration point, a look-up table structure with reduced programming complexity and a high-performance switchbox arrangement. We show that these blocks yield an improvement in area and write time of up to 3x and 33x respectively vs. a regular Flash implementation. By integrating the designed blocks in a FPGA, we demonstrate an area and delay reduction of up to 28% and 34% respectively on a set of benchmark circuits. These reductions are due to the eNVM 3-D integration and to their low on-resistance state value. Finally, we survey many flavors of the technologies and we show that the best results in terms of area and delay are obtained with Pt/TiO2/Pt stack, while the lowest leakage power is achieved by InGeTe stack

Heterogeneous Reconfigurable Fabrics for In-circuit Training and Evaluation of Neuromorphic Architectures

A heterogeneous device technology reconfigurable logic fabric is proposed which leverages the cooperating advantages of distinct magnetic random access memory (MRAM)-based look-up tables (LUTs) to realize sequential logic circuits, along with conventional SRAM-based LUTs to realize combinational logic paths. The resulting Hybrid Spin/Charge FPGA (HSC-FPGA) using magnetic tunnel junction (MTJ) devices within this topology demonstrates commensurate reductions in area and power consumption over fabrics having LUTs constructed with either individual technology alone. Herein, a hierarchical top-down design approach is used to develop the HSCFPGA starting from the configurable logic block (CLB) and slice structures down to LUT circuits and the corresponding device fabrication paradigms. This facilitates a novel architectural approach to reduce leakage energy, minimize communication occurrence and energy cost by eliminating unnecessary data transfer, and support auto-tuning for resilience. Furthermore, HSC-FPGA enables new advantages of technology co-design which trades off alternative mappings between emerging devices and transistors at runtime by allowing dynamic remapping to adaptively leverage the intrinsic computing features of each device technology. HSC-FPGA offers a platform for fine-grained Logic-In-Memory architectures and runtime adaptive hardware. An orthogonal dimension of fabric heterogeneity is also non-determinism enabled by either low-voltage CMOS or probabilistic emerging devices. It can be realized using probabilistic devices within a reconfigurable network to blend deterministic and probabilistic computational models. Herein, consider the probabilistic spin logic p-bit device as a fabric element comprising a crossbar-structured weighted array. The Programmability of the resistive network interconnecting p-bit devices can be achieved by modifying the resistive states of the array\u27s weighted connections. Thus, the programmable weighted array forms a CLB-scale macro co-processing element with bitstream programmability. This allows field programmability for a wide range of classification problems and recognition tasks to allow fluid mappings of probabilistic and deterministic computing approaches. In particular, a Deep Belief Network (DBN) is implemented in the field using recurrent layers of co-processing elements to form an n x m1 x m2 x ::: x mi weighted array as a configurable hardware circuit with an n-input layer followed by i ≥ 1 hidden layers. As neuromorphic architectures using post-CMOS devices increase in capability and network size, the utility and benefits of reconfigurable fabrics of neuromorphic modules can be anticipated to continue to accelerate

Design and Robustness Analysis on Non-volatile Storage and Logic Circuit

By combining the flexibility of MOS logic and the non-volatility of spintronic devices, spin-MOS logic and storage circuitry offer a promising approach to implement highly integrated, power-efficient, and nonvolatile computing and storage systems. Besides the persistent errors due to process variations, however, the functional correctness of Spin-MOS circuitry suffers from additional non-persistent errors that are incurred by the randomness of spintronic device operations, i.e., thermal fluctuations. This work quantitatively investigates the impact of thermal fluctuations on the operations of two typical Spin-MOS circuitry: one transistor and one magnetic tunnel junction (1T1J) spin-transfer torque random access memory (STT-RAM) cell and a nonvolatile latch design. A new nonvolatile latch design is proposed based on magnetic tunneling junction (MTJ) devices. In the standby mode, the latched data can be retained in the MTJs without consuming any power. Two types of operation errors can occur, namely, persistent and non-persistent errors. These are quantitatively analyzed by including models for process variations and thermal fluctuations during the read and write operations. A mixture importance sampling methodology is applied to enable yield-driven design and extend its application beyond memories to peripheral circuits and logic blocks. Several possible design techniques to reduce thermal induced non-persistent error rate are also discussed