Joint semiblind frequency offset and channel estimation for multiuser MIMO-OFDM uplink

A semiblind method is proposed for simultaneously estimating the carrier frequency offsets (CFOs) and channels of an uplink multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system. By incorporating the CFOs into the transmitted symbols and channels, the MIMO-OFDM with CFO is remodeled into an MIMO-OFDM without CFO. The known blind method for channel estimation (Zeng and Ng in 2004) (Y. H. Zeng and T. S. Ng, "A semi-blind channel estimation method for multi-user multi-antenna OFDM systems," IEEE Trans. Signal Process., vol. 52, no. 5, pp. 1419-1429, May 2004.) is then directly used for the remodeled system to obtain the shaped channels with an ambiguity matrix. A pilot OFDM block for each user is then exploited to resolve the CFOs and the ambiguity matrix. Two dedicated pilot designs, periodical and consecutive pilots, are discussed. Based on each pilot design and the estimated shaped channels, two methods are proposed to estimate the CFOs. As a result, based on the second-order statistics (SOS) of the received signal and one pilot OFDM block, the CFOs and channels are found simultaneously. Finally, a fast equalization method is given to recover the signals corrupted by the CFOs. © 2007 IEEE.published_or_final_versio

Cognitive Orthogonal Precoder for Two-tiered Networks Deployment

In this work, the problem of cross-tier interference in a two-tiered (macro-cell and cognitive small-cells) network, under the complete spectrum sharing paradigm, is studied. A new orthogonal precoder transmit scheme for the small base stations, called multi-user Vandermonde-subspace frequency division multiplexing (MU-VFDM), is proposed. MU-VFDM allows several cognitive small base stations to coexist with legacy macro-cell receivers, by nulling the small- to macro-cell cross-tier interference, without any cooperation between the two tiers. This cleverly designed cascaded precoder structure, not only cancels the cross-tier interference, but avoids the co-tier interference for the small-cell network. The achievable sum-rate of the small-cell network, satisfying the interference cancelation requirements, is evaluated for perfect and imperfect channel state information at the transmitter. Simulation results for the cascaded MU-VFDM precoder show a comparable performance to that of state-of-the-art dirty paper coding technique, for the case of a dense cellular layout. Finally, a comparison between MU-VFDM and a standard complete spectrum separation strategy is proposed. Promising gains in terms of achievable sum-rate are shown for the two-tiered network w.r.t. the traditional bandwidth management approach.Comment: 11 pages, 9 figures, accepted and to appear in IEEE Journal on Selected Areas in Communications: Cognitive Radio Series, 2013. Copyright transferred to IEE

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Design and implementation of an OFDMA-TDD physical layer for WiMAX applications

[Abstract]: This work describes the design, implementation, and performance evaluation of an orthogonal frequency division multiple access (OFDMA) time-division duplexing (TDD) physical layer (PHY) compliant with the worldwide interoperability for microwave access (WiMAX) standard using a costeffective software-defined radio (SDR) platform containing field programmable gate array (FPGA) and digital signal processor (DSP) modules. We show that the proposed SDR architecture is capable of supporting the wide variety of configuration options described in the WiMAX standard while fulfilling the stringent requirements of WiMAX OFDMA TDD PHYs. The architecture allows for the implementation of all TDD functionalities in the downlink and the uplink at both the base station and the mobile station. The proposed design is shown to efficiently use the available FPGA and DSP resources. We also carried out specific experiments that take into account the frame and the downlink map messages detection over ITU-R wireless channel models to illustrate the performance of the proposed design. Finally, we discuss the utilization of the proposed hardware architecture to implement the wirelessMAN-advanced air interface.This work has been partially supported by Indra Sistemas S.A., the Spanish Ministry of Defence with the technical direction of PEC/ITM under grant DN8644-COINCIDENTE, MINECO of Spain under grant TEC2010-19545-C04-01 and Xunta de Galicia, Spain, under grant 2012/287. The authors wish to thank J. M. Camas-Albar from Indra Sistemas S.A. for his help.Xunta de Galicia; 2012/28