Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

A Polyhedral Study of Mixed 0-1 Set

We consider a variant of the well-known single node fixed charge network flow set with constant capacities. This set arises from the relaxation of more general mixed integer sets such as lot-sizing problems with multiple suppliers. We provide a complete polyhedral characterization of the convex hull of the given set

An Approach Based on Particle Swarm Optimization for Inspection of Spacecraft Hulls by a Swarm of Miniaturized Robots

The remoteness and hazards that are inherent to the operating environments of space infrastructures promote their need for automated robotic inspection. In particular, micrometeoroid and orbital debris impact and structural fatigue are common sources of damage to spacecraft hulls. Vibration sensing has been used to detect structural damage in spacecraft hulls as well as in structural health monitoring practices in industry by deploying static sensors. In this paper, we propose using a swarm of miniaturized vibration-sensing mobile robots realizing a network of mobile sensors. We present a distributed inspection algorithm based on the bio-inspired particle swarm optimization and evolutionary algorithm niching techniques to deliver the task of enumeration and localization of an a priori unknown number of vibration sources on a simplified 2.5D spacecraft surface. Our algorithm is deployed on a swarm of simulated cm-scale wheeled robots. These are guided in their inspection task by sensing vibrations arising from failure points on the surface which are detected by on-board accelerometers. We study three performance metrics: (1) proximity of the localized sources to the ground truth locations, (2) time to localize each source, and (3) time to finish the inspection task given a 75% inspection coverage threshold. We find that our swarm is able to successfully localize the present so

Enhancing the bees algorithm using the traplining metaphor

This work aims to improve the performance of the Bees Algorithm (BA), particularly in terms of simplicity, accuracy, and convergence. Three improvements were made in this study as a result of bees’ traplining behaviour. The first improvement was the parameter reduction of the Bees Algorithm. This strategy recruits and assigns worker bees to exploit and explore all patches. Both searching processes are assigned using the Triangular Distribution Random Number Generator. The most promising patches have more workers and are subject to more exploitation than the less productive patches. This technique reduced the original parameters into two parameters. The results show that the Bi-BA is just as efficient as the basic BA, although it has fewer parameters. Following that, another improvement was proposed to increase the diversification performance of the Combinatorial Bees Algorithm (CBA). The technique employs a novel constructive heuristic that considers the distance and the turning angle of the bees’ flight. When foraging for honey, bees generally avoid making a sharp turn. By including this turning angle as the second consideration, it can control CBA’s initial solution diversity. Third, the CBA is strengthened to enable an intensification strategy that avoids falling into a local optima trap. The approach is based on the behaviour of bees when confronted with threats. They will keep away from re-visiting those flowers during the next bout for reasons like predators, rivals, or honey run out. The approach will remove temporarily threatened flowers from the whole tour, eliminating the sharp turn, and reintroduces them again to the habitual tour’s nearest edge. The technique could effectively achieve an equilibrium between exploration and exploitation mechanisms. The results show that the strategy is very competitive compared to other population-based nature-inspired algorithms. Finally, the enhanced Bees Algorithms are demonstrated on two real-world engineering problems, namely, Printed Circuit Board insertion sequencing and vehicles routing problem

Improvements on the bees algorithm for continuous optimisation problems

This work focuses on the improvements of the Bees Algorithm in order to enhance the algorithm’s performance especially in terms of convergence rate. For the first enhancement, a pseudo-gradient Bees Algorithm (PG-BA) compares the fitness as well as the position of previous and current bees so that the best bees in each patch are appropriately guided towards a better search direction after each consecutive cycle. This method eliminates the need to differentiate the objective function which is unlike the typical gradient search method. The improved algorithm is subjected to several numerical benchmark test functions as well as the training of neural network. The results from the experiments are then compared to the standard variant of the Bees Algorithm and other swarm intelligence procedures. The data analysis generally confirmed that the PG-BA is effective at speeding up the convergence time to optimum. Next, an approach to avoid the formation of overlapping patches is proposed. The Patch Overlap Avoidance Bees Algorithm (POA-BA) is designed to avoid redundancy in search area especially if the site is deemed unprofitable. This method is quite similar to Tabu Search (TS) with the POA-BA forbids the exact exploitation of previously visited solutions along with their corresponding neighbourhood. Patches are not allowed to intersect not just in the next generation but also in the current cycle. This reduces the number of patches materialise in the same peak (maximisation) or valley (minimisation) which ensures a thorough search of the problem landscape as bees are distributed around the scaled down area. The same benchmark problems as PG-BA were applied against this modified strategy to a reasonable success. Finally, the Bees Algorithm is revised to have the capability of locating all of the global optimum as well as the substantial local peaks in a single run. These multi-solutions of comparable fitness offers some alternatives for the decision makers to choose from. The patches are formed only if the bees are the fittest from different peaks by using a hill-valley mechanism in this so called Extended Bees Algorithm (EBA). This permits the maintenance of diversified solutions throughout the search process in addition to minimising the chances of getting trap. This version is proven beneficial when tested with numerous multimodal optimisation problems

Optimisation, Optimal Control and Nonlinear Dynamics in Electrical Power, Energy Storage and Renewable Energy Systems

The electrical power system is undergoing a revolution enabled by advances in telecommunications, computer hardware and software, measurement, metering systems, IoT, and power electronics. Furthermore, the increasing integration of intermittent renewable energy sources, energy storage devices, and electric vehicles and the drive for energy efficiency have pushed power systems to modernise and adopt new technologies. The resulting smart grid is characterised, in part, by a bi-directional flow of energy and information. The evolution of the power grid, as well as its interconnection with energy storage systems and renewable energy sources, has created new opportunities for optimising not only their techno-economic aspects at the planning stages but also their control and operation. However, new challenges emerge in the optimization of these systems due to their complexity and nonlinear dynamic behaviour as well as the uncertainties involved.This volume is a selection of 20 papers carefully made by the editors from the MDPI topic “Optimisation, Optimal Control and Nonlinear Dynamics in Electrical Power, Energy Storage and Renewable Energy Systems”, which was closed in April 2022. The selected papers address the above challenges and exemplify the significant benefits that optimisation and nonlinear control techniques can bring to modern power and energy systems

On the dynamics of human locomotion and co-design of lower limb assistive devices

Recent developments in lower extremities wearable robotic devices for the assistance and rehabilitation of humans suffering from an impairment have led to several successes in the assistance of people who as a result regained a certain form of locomotive capability. Such devices are conventionally designed to be anthropomorphic. They follow the morphology of the human lower limbs. It has been shown previously that non-anthropomorphic designs can lead to increased comfort and better dynamical properties due to the fact that there is more morphological freedom in the design parameters of such a device. At the same time, exploitation of this freedom is not always intuitive and can be difficult to incorporate. In this work we strive towards a methodology aiding in the design of possible non-anthropomorphic structures for the task of human locomotion assistance by means of simulation and optimization. The simulation of such systems requires state of the art rigid body dynamics, contact dynamics and, importantly, closed loop dynamics. Through the course of our work, we first develop a novel, open and freely available, state of the art framework for the modeling and simulation of general coupled dynamical systems and show how such a framework enables the modeling of systems in a novel way. The resultant simulation environment is suitable for the evaluation of structural designs, with a specific focus on locomotion and wearable robots. To enable open-ended co-design of morphology and control, we employ population-based optimization methods to develop a novel Particle Swarm Optimization derivative specifically designed for the simultaneous optimization of solution structures (such as mechanical designs) as well as their continuous parameters. The optimizations that we aim to perform require large numbers of simulations to accommodate them and we develop another open and general framework to aid in large scale, population based optimizations in multi-user environments. Using the developed tools, we first explore the occurrence and underlying principles of natural human gait and apply our findings to the optimization of a bipedal gait of a humanoid robotic platform. Finally, we apply our developed methods to the co-design of a non-anthropomorphic, lower extremities, wearable robot in simulation, leading to an iterative co-design methodology aiding in the exploration of otherwise hard to realize morphological design