Electromagnetic-thermal coupled simulation under various fault conditions of a triple redundant 9-phase PMASynRM

This paper performs electromagnetic (EM) and thermal coupled simulation based on 2D transient electromagnetic and 3D thermal model of a triple redundant 9-phase permanent magnet-assisted synchronous reluctance motor (PMASynRM) under various fault conditions at different speeds. The coupled simulation process is controlled by a scripting file. The resultant temperatures under EM-thermal coupled simulation will be comprehensively compared with those under thermal-only simulation. The predicted current waveforms under fault conditions by the 2D EM model and predicted temperatures by the 3D thermal model will be compared with the test results for validation. The outcomes of the study not only gives a better understanding of the thermal behavior, but also provides a guidance to the necessity of the EM-thermal coupled simulation under different fault conditions as well as to determination of the maximum permissible fault detection time before permanent damage due to the fault may occur

Torque Capacity Improvement of Flux-Switching PM Machines Based on Directional Stator Permeance Design

As one type of flux modulation machines, flux-switching permanent magnet (FSPM) machines present high sensitivity to airgap structures. Therefore, both stator/rotor teeth and slot/pole combinations have significant influences on machine performance. However, the relationships between the optimal stator structure and maximum torque capability of the FSPM machine are barely investigated. Therefore, this paper is devoted to proposing a directional stator permeance design approach to achieve the maximum torque of the FSPM machines under a given rotor, and reveal the corresponding stator structure. First, the relations between torque and air-gap permeance are presented based on a constructed torque contribution equation, where amplitudes and phase angles of the stator permeance harmonics are determined. Then, main permeance harmonics are directionally optimized to enlarge positive torque, while negative contributions are inversed to be positive. Especially, two FSPMs with 6-slot/19-pole and 6-slot/13-pole are chosen as design examples, and their optimal design processes and torque performances have been deeply analyzed, which verifies the effectiveness of the proposed design approach

Overview of Sensitivity Analysis Methods Capabilities for Traction AC Machines in Electrified Vehicles

© 2021 The Author(s). This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/.A robust design in electrified powertrains substantially helps to enhance the vehicle's overall efficiency. Robustness analyses come with complexity and computational costs at the vehicle level. The use of sensitivity analysis (SA) methods in the design phase has gained popularity in recent years to improve the performance of road vehicles while optimizing the resources, reducing the costs, and shortening the development time. Designers have started to utilize the SA methods to explore: i) how the component and vehicle level design options affect the main outputs i.e. energy efficiency and energy consumption; ii) observing sub-dependent parameters, which might be influenced by the variation of the targeted controllable (i.e. magnet thickness) and uncontrollable (i.e. magnet temperature) variables, in nonlinear dynamic systems; and iii) evaluating the interactions, of both dependent, and sub-dependent controllable/uncontrollable variables, under transient conditions. Hence the aim of this study is to succinctly review recent utilization of SA methods in the design of AC electric machines (EM)s used in vehicle powertrains, to evaluate and discuss the findings presented in recent research papers while summarizing the current state of knowledge. By systematically reviewing the literature on applied SAs in electrified powertrains, we offer a bibliometric analysis of the trends of application-oriented SA studies in the last and next decades. Finally, a numerical-based case study on a third-generation TOYOTA Prius EM will be given, to verify the SA-related findings of this article, alongside future works recommendations.Peer reviewe

Modeling, Analysis and Control of a Variable Flux Machine

Electric motors are the key elements in electric propulsion systems. The performance of Electric vehicles (EVs) significantly depends on the electric motors. Permanent magnet synchronous machines (PMSMs) with rare-earth magnets are widely used in EV applications because they fulfill most requirements of EV motors. However, low efficiency at high speed, limited resources and fluctuating prices of rare-earth permanent magnets (PMs) have forced industries to develop alternatives to rare-earth machine technologies. Recently, Variable-Flux PMSMs (VF-PMSMs) also known as memory motors have been introduced to overcome the drawbacks of PMSMs. This thesis focuses on the modeling, analysis and control of the Aluminum-Nickel-Cobalt (AlNiCo) magnet-based VF-PMSMs. This thesis presents the effect of different magnetization pulse widths and methods on the magnetization level, back-EMF and no-load losses of the VF-PMSM. The injection of the magnetization or de-magnetization current pulse will change the magnet flux linkage and back-EMF harmonics. An adaptive nonlinear filter is used to estimate the back-EMF during the motoring mode. The harmonics present in the machine back-EMF due to different magnetization and de-magnetization current pulse widths and magnetization methods are analyzed. Besides, the quality of the back-EMF for different speeds and machine no-load losses are presented for different magnetization states (MSs)

Optimisation de la Conception du Moteur Synchrone à Excitation Hybride pour Véhicules Électriques à Haut Performance

Since 1970, the ever-growing concerns of human community for the life-threatening environmental changes have pushed the policy makers to decarbonize those sectors with high energy demands, including the transportation industry. Optimal designs of Electric Vehicles (EVs) can contribute to today’s exigent car market, and take the leading role for future sustainable transportation of human and goods. At the heart of electromechanical energy conversion lays the electrical machines, which have attracted lots of interests and efforts for efficiency increase and cost reduction. In this thesis, a methodology is proposed and implemented to design and optimize the cost and efficiency of a Hybrid Excitation Synchronous Machine (HESM) for a given vehicle and a desired driving cycle. Hybridization in the excitation system can combine the favorable qualities of high-torque at low-speed with superior overloading capability, exceptional flux weakening and extended Constant Power Speed Range (CPSR), high efficiency, and flexible controllability in motoring and generation modes. With HESM technology, we can also shift from the rare-earth magnets towards the cheap ferrite magnets and guaranty the supply for motor industry. The designed HESM in this work responds to three requirements of the vehicle, namely, the maximum cruising speed, acceleration time, and gradeability, with the least or null overdesign in the drivetrain. At the same time, it will have the maximum global efficiency over the driving cycle, and the minimum cost for the material. The optimization is conducted at either of the component and system levels. The optimization at component-level is developed based on the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). A new formulation for the objective functions is proposed, which deals with the design optimization and cost minimization, simultaneously. To maximize the efficiency, a system-level search is conducted to find the optimum HESM with the highest global efficiency over a given driving cycle. Due to the 3D direction of magnetic flux in the selected HESM topology, the Finite Element Analysis (FEA) was very time- and process-consuming. To be able to evaluate the objective functions during the optimization, a new model has been developed based on a 3D Magnetic Equivalent Circuit (MEC) network. This model predicts well the non-linearity of magnetic materials, as compared with the FEA simulations. At last, the final optimized HESM is evaluated by the virtue of FEA technique.Depuis 1970, les préoccupations de l’humanité envers les changements climatiques ont poussé les chercheurs à faire des études approfondies pour optimiser les machines électriques pour avoir des véhicules électriques plus performants et moins énergivores. La conception optimale de véhicules électriques (EV) peut contribuer pour un marché automobile plus exigeant et jouer un rôle principal pour le futur du transport durable des biens et des personnes. Les machines électriques se trouvent au cœur de la conversion d'énergie électromécanique, qui ont suscité beaucoup d'intérêts et d’efforts pour augmenter leur rendement et réduire leur coût. Cette thèse propose une méthodologie et une mise en œuvre pour minimiser le coût et maximiser l’efficacité d’une machine synchrone à excitation hybride (HESM) pour un véhicule donné et un cycle de conduite sélectionné. L'hybridation du système d’excitation peut combiner les qualités favorables comme un couple élevé à basse vitesse avec une capacité de surcharge supérieure, un défluxage exceptionnelle et une plage de vitesse prolongée de puissance constante (CPSR), une efficacité élevée et une contrôlabilité flexible dans les modes de traction et de freinage régénératif. Avec la technologie HESM, nous pouvons également passer des aimants de terres rares aux aimants en ferrite bon marché, et garantir l’approvisionnement pour l’industrie automobile. Le HESM conçu dans ce travail répond à trois exigences du véhicule : la vitesse de croisière maximale, le temps d’accélération et la capacité de monter une pente, avec un surdimensionnement minimal ou nulle de la chaîne de traction. Une optimisation multiniveau avec une interaction entre la vision composant et la vision système est proposée et validée. L’optimisation au niveau du composant est développée sur la base de l’algorithme génétique de tri non dominé (NSGA-II). Une nouvelle formulation pour les fonctions objectives est proposée pour l’optimisation simultanée de la conception de la machine et de la minimisation de son coût. Après avoir optimisés onze HESM au niveau du composant, pour maximiser l’efficacité, une optimisation au niveau du système est réalisée pour trouver le HESM optimal avec le plus haut rendement global sur le cycle de conduite donné. Une validation de la conception finale de la HESM présente un meilleur rendement global sur le cycle de conduite de 18,65% en relation à une machine synchrone à excitation séparée équivalente et 15,8% en relation à une à aiment permanent. En raison de la direction 3D du flux magnétique dans la topologie HESM sélectionnée, l’analyse par éléments finis (FEA) prenait beaucoup de temps et de ressources computationnelles. Afin d’évaluer les fonctions objectives lors de l’optimisation, un nouveau modèle a été développé basé sur un réseau de circuits magnétiques équivalents 3D (MEC). Ce modèle prédit bien la non-linéarité des matériaux magnétiques, par rapport aux simulations FEA. Enfin, le HESM optimisé final est évalué grâce à la technique FEA