1,448 research outputs found
Superposition Coding Aided Bi-directional Relay Transmission Employing Iteratively Decoded Self-Concatenated Convolutional Codes
In this paper, we consider coding schemes designed for two nodes communicating with each other with the aid of a relay node, which receives information from the two nodes in the first time slot. At the relay node we combine a powerful Superposition Coding (SPC) scheme with Iteratively Decoded Self-Concatenated Convolutional Codes (SECCC-ID), which exchange mutual information between each other. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second time slot after re-encoding it, again, using a SECCC encoder. At the destination, an amalgamated SPC-SECCC block then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput. Additionally, the SPC-SECCC system achieves a low BER even for realistic error-infested relaying
Dual band fss with fractal elements
Experimental and computed results of a frequency selective surface (FSS) based on a certain type of fractal element are presented. The fractal element is a two iteration Sierpinski gasket dipole. Owing to the dual band behaviour of the two iteration Sierpinski gasket dipole, two stopbands are exhibited within the operating frequency band. This behaviour is obtained by arraying one simple element in a single layer frequency selective surface (FSS)Peer ReviewedPostprint (published version
New Concept of PLC Modems: Multi-Carrier System for Frequency Selective Slow-Fading Channels Based on Layered SCCC Turbocodes
The article introduces a novel concept of a PLC modem as a complement to the existing G3 and PRIME standards for communications using medium- or high-voltage overhead or cable lines. The proposed concept is based on the fact that the levels of impulse noise and frequency selectivity are lower on high-voltage lines than on low-voltage ones. Also, the demands for “cost-effective” circuitry design are not so crucial as in the case of modems for low-voltage level. In contract to these positive conditions, however, there is the need to overcome much longer distances and to take into account low SNR on the receiving side. With respect to the listed reasons, our concept makes use of MCM, instead of OFDM. The assumption of low SNR is compensated through the use of an efficient channel coding based on a serially concatenated turbo code. In addition, MCM offers lower latency and PAPR compared to OFDM. Therefore, when using MCM, it is possible to excite the line with higher power. The proposed concept has been verified during experimental transmission of testing data over a real, 5 km long, 22kV overhead line
Bilayer Low-Density Parity-Check Codes for Decode-and-Forward in Relay Channels
This paper describes an efficient implementation of binning for the relay
channel using low-density parity-check (LDPC) codes. We devise bilayer LDPC
codes to approach the theoretically promised rate of the decode-and-forward
relaying strategy by incorporating relay-generated information bits in
specially designed bilayer graphical code structures. While conventional LDPC
codes are sensitively tuned to operate efficiently at a certain channel
parameter, the proposed bilayer LDPC codes are capable of working at two
different channel parameters and two different rates: that at the relay and at
the destination. To analyze the performance of bilayer LDPC codes, bilayer
density evolution is devised as an extension of the standard density evolution
algorithm. Based on bilayer density evolution, a design methodology is
developed for the bilayer codes in which the degree distribution is iteratively
improved using linear programming. Further, in order to approach the
theoretical decode-and-forward rate for a wide range of channel parameters,
this paper proposes two different forms bilayer codes, the bilayer-expurgated
and bilayer-lengthened codes. It is demonstrated that a properly designed
bilayer LDPC code can achieve an asymptotic infinite-length threshold within
0.24 dB gap to the Shannon limits of two different channels simultaneously for
a wide range of channel parameters. By practical code construction,
finite-length bilayer codes are shown to be able to approach within a 0.6 dB
gap to the theoretical decode-and-forward rate of the relay channel at a block
length of and a bit-error probability (BER) of . Finally, it is
demonstrated that a generalized version of the proposed bilayer code
construction is applicable to relay networks with multiple relays.Comment: Submitted to IEEE Trans. Info. Theor
- …