The design of a hybrid DC motor/SMA actuated robotic hand based on physiological and anatomical synergies

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.Includes bibliographical references (p. 73-74).A new approach to the design and control of multi-fingered hands using hybrid DC motor-Shape Memory Alloy (SMA) array actuators is presented in this thesis. The fundamental design concept is based on the principle of motor control synergy, a biomechanics terminology for coordinated motion generation. Principal component analysis is used for determining the most significant direction as well as the residual directions. A single DC motor is used for driving multiple fingers at a particular velocity distribution over a vast number of finger joints corresponding to the direction of the most significant synergy. SMA array actuators are used for driving the fingers in the residual directions. Although many actuator axes are needed for spanning the residual space, the required strokes are much shorter than the most significant direction; compact and high energy-density SMA actuators meet these requirements. The thesis presents synergistic integration of these two types of actuators having diverse characteristics. This allows us to embed all the actuators and transmission mechanisms in the palm, eliminating a bundle of tendons crossing over the wrist joints. An initial prototype hand is designed and built.by Josiah Benjamin Rosmarin.S.M

Two-Fingered Haptic Device for Robot Hand Teleoperation

A haptic feedback system is required to assist telerehabilitation with robot hand. The system should provide the reaction force measured in the robot hand to an operator. In this paper, we have developed a force feedback device that presents a reaction force to the distal segment of the operator's thumb, middle finger, and basipodite of the middle finger when the robot hand grasps an object. The device uses a shape memory alloy as an actuator, which affords a very compact, lightweight, and accurate device

Ground Robotic Hand Applications for the Space Program study (GRASP)

This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time

Reduction of dimensionality of a cellular actuator array for driving a robotic hand

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.Includes bibliographical references (p. 89-93).In an attempt to explore an alternative to today's robot actuators, a new approach to artificial muscle actuator design and control is presented. The objective of this research is to coordinate the multitude of artificial muscle actuator axes for a large DOF (degree of freedom) robotic system based on dimensionality reduction. An array of SMA actuators is segmented into many independently controlled, spatially discrete volumes, each contributing a small displacement to create a large motion. Segmented Binary Control is proposed where each segment is controlled in an on-off manner, creating a stepper-motor like actuator. This overcomes hysteresis and other nonlinearities of the actuator material. The segmented cellular architecture of SMA wires is extended to a multi-axis actuator array by arranging the segments in a two-dimensional array. The multi-axis control is streamlined and coordinated using a grouping of segments called C-segments in order to activate multiple links of a robot mechanism in a coordinated manner. This allows control of large DOF with a small number of controls. The proposed approach is inspired by the segmented architecture of biological muscles and synergies, a strategy of grouping output variables to simplify the control of large number of muscles. Data from various hand postures are collected using data glove and used in creating the C-segment design that is capable of performing the given postures. A lightweight Robotic Hand with 16 DOF is built using shape memory alloy actuators. This hand weighs less than 1kg including 32 SMA actuators and control circuitry. Eight C-segments that are ON-off controlled are used to create sixteen given postures. In the future, this approach can be applied to applications where the control signal is inherently limited due to limited amount of information that can be extracted or transferred to the robot, such as brain machine interface and tele-operation.by Kyu-Jin Cho.Ph.D

Design and Fabrication of Fabric ReinforcedTextile Actuators forSoft Robotic Graspers

abstract: Wearable assistive devices have been greatly improved thanks to advancements made in soft robotics, even creation soft extra arms for paralyzed patients. Grasping remains an active area of research of soft extra limbs. Soft robotics allow the creation of grippers that due to their inherit compliance making them lightweight, safer for human interactions, more robust in unknown environments and simpler to control than their rigid counterparts. A current problem in soft robotics is the lack of seamless integration of soft grippers into wearable devices, which is in part due to the use of elastomeric materials used for the creation of most of these grippers. This work introduces fabric-reinforced textile actuators (FRTA). The selection of materials, design logic of the fabric reinforcement layer and fabrication method are discussed. The relationship between the fabric reinforcement characteristics and the actuator deformation is studied and experimentally verified. The FRTA are made of a combination of a hyper-elastic fabric material with a stiffer fabric reinforcement on top. In this thesis, the design, fabrication, and evaluation of FRTAs are explored. It is shown that by varying the geometry of the reinforcement layer, a variety of motion can be achieve such as axial extension, radial expansion, bending, and twisting along its central axis. Multi-segmented actuators can be created by tailoring different sections of fabric-reinforcements together in order to generate a combination of motions to perform specific tasks. The applicability of this actuators for soft grippers is demonstrated by designing and providing preliminary evaluation of an anthropomorphic soft robotic hand capable of grasping daily living objects of various size and shapes.Dissertation/ThesisMasters Thesis Biomedical Engineering 201

Manos Robóticas Antropomórficas: una revisión

This paper presents a review on main topic regarding to anthropomorphic robotic hands developed in the last years, taking into account the more important mechatronics designs submit on the literature, and making a comparison between them. The next chapters deepen on level of anthropomorphism and dexterity in advanced actuated hands and upper limbs prostheses, as well as a brief overview on issues such as grasping, transmission mechanisms, sensory and actuator system, and also a short introduction on under-actuated robotic hands is reported.Este artículo presenta una revisión de los principales desarrollos que se han hecho en los últimos años en manos robóticas antropomórficas. Las primeras secciones tratan temas como el grado de antropomorfismo y de destreza en las manos robóticas más avanzadas, incluyendo una comparación entre ellas. También se abordan temas como la capacidad de agarre de los efectores finales, los mecanismos de trasmisión, el sistema actuador y sensórico, así como una breve introducción al tema de manos robóticas sub-actuadas. Dirección de correspondencia: Carrera 11 # 101-80, Bogotá (Colombia)

Design and control of a robotic thumb using piezoelectric actuators

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 38).Although much more complex and maneuverable than their predecessors, today's anthropomorphic robotic hands still cannot match the dexterity of human hands. While most of these limitations are caused by inadequate sensor and control systems, the use of large, heavy, and stiff actuators can also contribute to dexterity problems. If we expect robotic hands to interact with humans and human objects, joint actuators must allow a compromise of strength and compliance. Piezoelectric (PZT) actuators exhibit a high back driveability which could facilitate this compromise. Although they have low displacement and force output, they are useful in fine control applications. When combined with a DC motor, PZT actuators can produce precise, delicate movements in robotic hands. To develop the novel DC-PZT hybrid system, the force and displacement capabilities of PZT actuators were first characterized with a simple one degree of freedom system. The data from this characterization was analyzed and used to develop a one degree of freedom thumb using a hybrid DC motor/PZT actuator system. To study system performance, a simple position control scheme was implemented for the DC motor and PZT actuators. The experimental results suggest that current PZT actuators, even when combined with a DC motor, cannot produce enough thumb tip force to mirror the functionality of the human hand. That said, improvements to the actuator could make PZT-actuated hands a future possibility.by Jacob A. Levinson.S.B

Anthropomorphic robot finger with multi-point tactile sensation

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.Includes bibliographical references (p. 84-95).The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane [58]. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback, either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with the tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an engineered analog of the human hand with a complete haptic system.by Jessica Lauren Banks.S.M

Design and Control of an Anthropomorphic Robotic Finger with Multi-point Tactile Sensation

The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with a simple tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an %engineered analog of the human hand with a complete haptic system