Threshold modulation in 1-D error diffusion

Error diffusion (ED) is widely used in digital imaging as a binarization process which preserves fine detail and results in pleasant images. The process resembles the human visual system in that it exhibits an intrinsic edge enhancement An additional extrinsic edge enhancement can be controlled by varying the threshold. None of these characteristics has yet been fully explained due to the lack of a suitable mathematical model of the algorithm. The extrinsic sharpening introduced in 1-D error diffusion is the subject of this thesis. An available pulse density modulation(PDM) model generated from a frequency modulation is used to gain a better understanding of variables in ED. As a result, threshold variation fits the model as an additional phase modulation. Equivalent images are obtained by applying ED with threshold modulation or by preprocessing an image with an appropriate convolution mask and subsequently running standard ED

Development of Some Spatial-domain Preprocessing and Post-processing Algorithms for Better 2-D Up-scaling

Image super-resolution is an area of great interest in recent years and is extensively used in applications like video streaming, multimedia, internet technologies, consumer electronics, display and printing industries. Image super-resolution is a process of increasing the resolution of a given image without losing its integrity. Its most common application is to provide better visual effect after resizing a digital image for display or printing. One of the methods of improving the image resolution is through the employment of a 2-D interpolation. An up-scaled image should retain all the image details with very less degree of blurring meant for better visual quality. In literature, many efficient 2-D interpolation schemes are found that well preserve the image details in the up-scaled images; particularly at the regions with edges and fine details. Nevertheless, these existing interpolation schemes too give blurring effect in the up-scaled images due to the high frequency (HF) degradation during the up-sampling process. Hence, there is a scope to further improve their performance through the incorporation of various spatial domain pre-processing, post-processing and composite algorithms. Therefore, it is felt that there is sufficient scope to develop various efficient but simple pre-processing, post-processing and composite schemes to effectively restore the HF contents in the up-scaled images for various online and off-line applications. An efficient and widely used Lanczos-3 interpolation is taken for further performance improvement through the incorporation of various proposed algorithms. The various pre-processing algorithms developed in this thesis are summarized here. The term pre-processing refers to processing the low-resolution input image prior to image up-scaling. The various pre-processing algorithms proposed in this thesis are: Laplacian of Laplacian based global pre-processing (LLGP) scheme; Hybrid global pre-processing (HGP); Iterative Laplacian of Laplacian based global pre-processing (ILLGP); Unsharp masking based pre-processing (UMP); Iterative unsharp masking (IUM); Error based up-sampling(EU) scheme. The proposed algorithms: LLGP, HGP and ILLGP are three spatial domain preprocessing algorithms which are based on 4th, 6th and 8th order derivatives to alleviate nonuniform blurring in up-scaled images. These algorithms are used to obtain the high frequency (HF) extracts from an image by employing higher order derivatives and perform precise sharpening on a low resolution image to alleviate the blurring in its 2-D up-sampled counterpart. In case of unsharp masking based pre-processing (UMP) scheme, the blurred version of a low resolution image is used for HF extraction from the original version through image subtraction. The weighted version of the HF extracts are superimposed with the original image to produce a sharpened image prior to image up-scaling to counter blurring effectively. IUM makes use of many iterations to generate an unsharp mask which contains very high frequency (VHF) components. The VHF extract is the result of signal decomposition in terms of sub-bands using the concept of analysis filter bank. Since the degradation of VHF components is maximum, restoration of such components would produce much better restoration performance. EU is another pre-processing scheme in which the HF degradation due to image upscaling is extracted and is called prediction error. The prediction error contains the lost high frequency components. When this error is superimposed on the low resolution image prior to image up-sampling, blurring is considerably reduced in the up-scaled images. Various post-processing algorithms developed in this thesis are summarized in following. The term post-processing refers to processing the high resolution up-scaled image. The various post-processing algorithms proposed in this thesis are: Local adaptive Laplacian (LAL); Fuzzy weighted Laplacian (FWL); Legendre functional link artificial neural network(LFLANN). LAL is a non-fuzzy, local based scheme. The local regions of an up-scaled image with high variance are sharpened more than the region with moderate or low variance by employing a local adaptive Laplacian kernel. The weights of the LAL kernel are varied as per the normalized local variance so as to provide more degree of HF enhancement to high variance regions than the low variance counterpart to effectively counter the non-uniform blurring. Furthermore, FWL post-processing scheme with a higher degree of non-linearity is proposed to further improve the performance of LAL. FWL, being a fuzzy based mapping scheme, is highly nonlinear to resolve the blurring problem more effectively than LAL which employs a linear mapping. Another LFLANN based post-processing scheme is proposed here to minimize the cost function so as to reduce the blurring in a 2-D up-scaled image. Legendre polynomials are used for functional expansion of the input pattern-vector and provide high degree of nonlinearity. Therefore, the requirement of multiple layers can be replaced by single layer LFLANN architecture so as to reduce the cost function effectively for better restoration performance. With single layer architecture, it has reduced the computational complexity and hence is suitable for various real-time applications. There is a scope of further improvement of the stand-alone pre-processing and postprocessing schemes by combining them through composite schemes. Here, two spatial domain composite schemes, CS-I and CS-II are proposed to tackle non-uniform blurring in an up-scaled image. CS-I is developed by combining global iterative Laplacian (GIL) preprocessing scheme with LAL post-processing scheme. Another highly nonlinear composite scheme, CS-II is proposed which combines ILLGP scheme with a fuzzy weighted Laplacian post-processing scheme for more improved performance than the stand-alone schemes. Finally, it is observed that the proposed algorithms: ILLGP, IUM, FWL, LFLANN and CS-II are better algorithms in their respective categories for effectively reducing blurring in the up-scaled images

Enhancement of Digital Photo Frame Capabilities With Dedicated Hardware

Photo frames have come a long way since the typical ones that needed to have a photo printed and stuck on them. Today in this digital era we have a new concept, named digital photo frame, a modern representation of the conventional photo frame. A digital photo frame is basically a picture frame that displays photos without the need to print them. They are available in a variety of sizes and with varied configurations. A typical frame varies in size from 7 inches to 20 inches. There are also key chain sized frames available. These frames also support a variety of formats like .jpeg, .tiff, .bmp and so on. Most of the frames provide an option to run the photos in a sequential or random manner as a slideshow with an adjustable time interval. The mode of input of the photos to the frame is also multi-fold. It can be done directly via the memory card of the camera, or else various memory devices like USB drives, SD Cards, MMC Cards and so on can be used. Nowadays even Bluetooth technology is being used. Another option that is becoming quite popular is that, users can take their photos directly from the Internet from sites like Flickr, Picassa or from their e-mail. Also these frames generally come with built in speakers and with remote controls. Our initial objective was to decide on which all features can be added to the Digital Photo Frame that we design. For this purpose we conducted simulation exercises in MATLAB so as to prove its feasibility. This simulation exercise was divided into two parts. The first part was to perform compression and decompression and the second half dealt with the various enhancements that can be added to the frame. For our compression and decompression we considered the JPEG standard. Joint Photographic Experts Group - an ISO/ITU standard for compressing still images. The JPEG format is very popular due to its variable compression range. A few limitations of JPEG include the fact that it is lossy and also not great for displaying text. The common extension for it include *.jpg, *.jff, *.m-jpeg,*.mpeg The various enhancement features that we tested for feasibility include Mean Filter, Median Filter, Image Sharpening, Negative Image Extraction, Logarithmic Transformations, Power Law Correction (Gamma Correction), Contrast Stretching, Grey Level Slicing, Bit Plane Slicing, Laplace Filtering. We then proceeded onto the hardware implementation of the above said features. We only implemented a handful of features owing to the complexity of design and lack of time. We first implemented the Compression and Decompression algorithm. The two enhancement features we implemented were Laplace Filter and Median Filter. For our implementation we used the VIRTEX 2 FPGA Board

Monte Carlo-based Noise Compensation in Coil Intensity Corrected Endorectal MRI

Background: Prostate cancer is one of the most common forms of cancer found in males making early diagnosis important. Magnetic resonance imaging (MRI) has been useful in visualizing and localizing tumor candidates and with the use of endorectal coils (ERC), the signal-to-noise ratio (SNR) can be improved. The coils introduce intensity inhomogeneities and the surface coil intensity correction built into MRI scanners is used to reduce these inhomogeneities. However, the correction typically performed at the MRI scanner level leads to noise amplification and noise level variations. Methods: In this study, we introduce a new Monte Carlo-based noise compensation approach for coil intensity corrected endorectal MRI which allows for effective noise compensation and preservation of details within the prostate. The approach accounts for the ERC SNR profile via a spatially-adaptive noise model for correcting non-stationary noise variations. Such a method is useful particularly for improving the image quality of coil intensity corrected endorectal MRI data performed at the MRI scanner level and when the original raw data is not available. Results: SNR and contrast-to-noise ratio (CNR) analysis in patient experiments demonstrate an average improvement of 11.7 dB and 11.2 dB respectively over uncorrected endorectal MRI, and provides strong performance when compared to existing approaches. Conclusions: A new noise compensation method was developed for the purpose of improving the quality of coil intensity corrected endorectal MRI data performed at the MRI scanner level. We illustrate that promising noise compensation performance can be achieved for the proposed approach, which is particularly important for processing coil intensity corrected endorectal MRI data performed at the MRI scanner level and when the original raw data is not available.Comment: 23 page

Development Of Contrast Enhancement Algorithm For Images Captured Under Insufficient Illumination

Many methods have been proposed to improve the contrast, quality and to optimize the insufficient illumination images. In the image enhancement, the main goal is to improve the contrast in the images. Images with high quality contain a great variety of information. The images quality is very easily affected by lighting, climate or equipment’s that have been used to capture the image. Some of these conditions such as insufficient illumination lead to darker images where the image may suffer information loss. Therefore, this thesis puts forward an optimized enhancement method in order to retain the information in the image. This proposed method performs on the insufficient light images. The proposed algorithm is decomposed by Haar wavelet to obtain the decomposition coefficient in all directions of the image, adjusts the threshold values of wavelet coefficient, then reconstruct the image. Finally, do the suitable postprocessing for the reconstructed image. The experimental results demonstrate that the proposed method successfully improves the image quality and contrast and these proven by a series of experiments. The proposed method shows good results for image enhancement. Whether it is in the image contrast enhancement, or extent of noise pollution. The proposed method was enhanced the contrast value more than fifty thousand at the same time, the variance was controlled less than ten thousand

Power-Aware Design Methodologies for FPGA-Based Implementation of Video Processing Systems

The increasing capacity and capabilities of FPGA devices in recent years provide an attractive option for performance-hungry applications in the image and video processing domain. FPGA devices are often used as implementation platforms for image and video processing algorithms for real-time applications due to their programmable structure that can exploit inherent spatial and temporal parallelism. While performance and area remain as two main design criteria, power consumption has become an important design goal especially for mobile devices. Reduction in power consumption can be achieved by reducing the supply voltage, capacitances, clock frequency and switching activities in a circuit. Switching activities can be reduced by architectural optimization of the processing cores such as adders, multipliers, multiply and accumulators (MACS), etc. This dissertation research focuses on reducing the switching activities in digital circuits by considering data dependencies in bit level, word level and block level neighborhoods in a video frame. The bit level data neighborhood dependency consideration for power reduction is illustrated in the design of pipelined array, Booth and log-based multipliers. For an array multiplier, operands of the multipliers are partitioned into higher and lower parts so that the probability of the higher order parts being zero or one increases. The gating technique for the pipelined approach deactivates part(s) of the multiplier when the above special values are detected. For the Booth multiplier, the partitioning and gating technique is integrated into the Booth recoding scheme. In addition, a delay correction strategy is developed for the Booth multiplier to reduce the switching activities of the sign extension part in the partial products. A novel architecture design for the computation of log and inverse-log functions for the reduction of power consumption in arithmetic circuits is also presented. This also utilizes the proposed partitioning and gating technique for further dynamic power reduction by reducing the switching activities. The word level and block level data dependencies for reducing the dynamic power consumption are illustrated by presenting the design of a 2-D convolution architecture. Here the similarities of the neighboring pixels in window-based operations of image and video processing algorithms are considered for reduced switching activities. A partitioning and detection mechanism is developed to deactivate the parallel architecture for window-based operations if higher order parts of the pixel values are the same. A neighborhood dependent approach (NDA) is incorporated with different window buffering schemes. Consideration of the symmetry property in filter kernels is also applied with the NDA method for further reduction of switching activities. The proposed design methodologies are implemented and evaluated in a FPGA environment. It is observed that the dynamic power consumption in FPGA-based circuit implementations is significantly reduced in bit level, data level and block level architectures when compared to state-of-the-art design techniques. A specific application for the design of a real-time video processing system incorporating the proposed design methodologies for low power consumption is also presented. An image enhancement application is considered and the proposed partitioning and gating, and NDA methods are utilized in the design of the enhancement system. Experimental results show that the proposed multi-level power aware methodology achieves considerable power reduction. Research work is progressing In utilizing the data dependencies in subsequent frames in a video stream for the reduction of circuit switching activities and thereby the dynamic power consumption

Illumination coding meets uncertainty learning: toward reliable AI-augmented phase imaging

We propose a physics-assisted deep learning (DL) framework for large space-bandwidth product (SBP) phase imaging. We design an asymmetric coded illumination scheme to encode high-resolution phase information across a wide field-of-view. We then develop a matching DL algorithm to provide large-SBP phase estimation. We show that this illumination coding scheme is highly scalable in achieving flexible resolution, and robust to experimental variations. We demonstrate this technique on both static and dynamic biological samples, and show that it can reliably achieve 5X resolution enhancement across 4X FOVs using only five multiplexed measurements -- more than 10X data reduction over the state-of-the-art. Typical DL algorithms tend to provide over-confident predictions, whose errors are only discovered in hindsight. We develop an uncertainty learning framework to overcome this limitation and provide predictive assessment to the reliability of the DL prediction. We show that the predicted uncertainty maps can be used as a surrogate to the true error. We validate the robustness of our technique by analyzing the model uncertainty. We quantify the effect of noise, model errors, incomplete training data, and "out-of-distribution" testing data by assessing the data uncertainty. We further demonstrate that the predicted credibility maps allow identifying spatially and temporally rare biological events. Our technique enables scalable AI-augmented large-SBP phase imaging with dependable predictions.Published versio