Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design.

A multilevel dynamic interconnect model was derived for accurate a priori signal integrity estimates. Cross-talk and delay estimations over interconnects in deep submicron technology were analyzed systematically using this model. Good accuracy and excellent time-efficiency were found compared with electromagnetic simulations. We aim to build a dynamic interconnect library with this model to facilitate the interconnect issues for future VLSI design

A Survey of Fault-Injection Methodologies for Soft Error Rate Modeling in Systems-on-Chips

The development of process technology has increased system performance, but the system failure probability has also significantly increased. It is important to consider the system reliability in addition to the cost, performance, and power consumption. In this paper, we describe the types of faults that occur in a system and where these faults originate. Then, fault-injection techniques, which are used to characterize the fault rate of a system-on-chip (SoC), are investigated to provide a guideline to SoC designers for the realization of resilient SoCs

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast

Study Of The Relationship Between Delta Delay And Adjacent Parallel Wire Length In 45 Nanometer Process Technology

Hierarchical design spans the complete framework of a design flow from Register Transfer Level (RTL), synthesis, place and route, timing closure and various other analyses before sign-off. Finer geometries and increasing interconnect density however have resulted signal integrity becoming the key issue for Deep Sub-Micron design. Post silicon bug due to noise and signal integrity can be prevented and fixed at early stage of the IC design cycle. The purpose of this research is to establish a preventive measurement for adjacent wire that can travel in parallel for 45nm technology. The intention is to ensure that a complex design can be delivered to the market with accurate, fast and trusted analysis and provide sign-off solution. Main approach is to conduct the relationship study between delta delay and adjacent parallel wire in 45 nanometer (nm) process technology and provide a preventive measurement to limit the adjacent wire can travel in parallel. The design is explored thoroughly to study the relationship between delay noise and adjacent parallel wire. The correlation is translated into an equation to estimate the delay noise produced with a certain length of adjacent parallel wire

Cell Library Creation using ALF

The design of Integrated Circuit (ASICs and SoCs) typically relies on the availability of a library consisting of predefined components called technology cells. Silicon vendors use proprietary formats to describe technology cells and macro modules in conjunction with numerous translators to feed technology library data to Electronic Design Automation (EDA) tools. Multiple grammar formats are used to represent various aspects of the cells in the same technology library, such as behavior for simulation, timing parameters for synthesis, physical data for layout, noise parameters for signal integrity checks, etc. In addition, most of these formats are highly tool-oriented and are not grammatically consistent. In this paper we will discuss the newly adopted IEEE 1603-2003 Advanced Library Format (ALF) standard which eliminates such drawbacks. This standard defines a grammar for accurate and comprehensive modeling of technology libraries and macro modules in order to bridge the growing gap between new design rules and the analysis required for complex high-end IC implementations

Overcoming the challenges in very deep submicron for area reduction, power reduction and faster design closure

The project is aimed at understanding the existing very deep sub-micron (VDSM) implementation of a digital design, analyzing it from the point of view of power, area and timing and to come up with solutions and strategies to optimize the implementation in terms of power, area and timing. The effort involved, to understand the constraints, reasons and the requirements resulting in the existing implementation of the design. Further, various experiments were carried out to improve the design in various aspects like power, area and timing. The tradeoffs required and the benefits of each of the experiments were contrasted and analyzed. The optimum solutions and strategies which balance the requirements were tried out and published at the end of the report

Infrastructure for Detector Research and Development towards the International Linear Collider

The EUDET-project was launched to create an infrastructure for developing and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture

Modelling and Test Generation for Crosstalk Faults in DSM Chips

In the era of deep submicron technology (DSM), many System-on-Chip (SoC) applications require the components to be operating at high clock speeds. With the shrinking feature size and ever increasing clock frequencies, the DSM technology has led to a well-known problem of Signal Integrity (SI) more especially in the connecting layout design. The increasing aspect ratios of metal wires and also the ratio of coupling capacitance over substrate capacitance result in electrical coupling of interconnects which leads to crosstalk problems. In this thesis, first the work carried out to model the crosstalk behaviour between aggressor and victim by considering the distributed RLGC parameters of interconnect and the coupling capacitance and mutual conductance between the two nets is presented. The proposed model also considers the RC linear models of the CMOS drivers and receivers. The behaviour of crosstalk in case of under etching problem has been studied and modelled by distributing and approximating the defect behaviour throughout the nets. Next, the proposed model has also been extended to model the behaviour of crosstalk in case of one victim is influenced by several aggressors by considering all aggressors have similar effect (worst-case) on victim. In all the above cases simulation experiments were also carried out and compared with well-known circuit simulation tool PSPICE. It has been proved that the generated crosstalk model is faster and the results generated are within 10% of error margin compared to latter simulation tool. Because of the accuracy and speed of the proposed model, the model is very useful for both SoC designers and test engineers to analyse the crosstalk behaviour. Each manufactured device needs to be tested thoroughly to ensure the functionality before its delivery. The test pattern generation for crosstalk faults is also necessary to test the corresponding crosstalk faults. In this thesis, the well-known PODEM algorithm for stuck-at faults is extended to generate the test patterns for crosstalk faults between single aggressor and single victim. To apply modified PODEM for crosstalk faults, the transition behaviour has been divided into two logic parts as before transition and after transition. After finding individually required test patterns for before transition and after transition, the generated logic vectors are appended to create transition test patterns for crosstalk faults. The developed algorithm is also applied for a few ISCAS 85 benchmark circuits and the fault coverage is found excellent in most circuits. With the incorporation of proposed algorithm into the ATPG tools, the efficiency of testing will be improved by generating the test patterns for crosstalk faults besides for the conventional stuck-at faults. In generating test patterns for crosstalk faults on single victim due to multiple aggressors, the modified PODEM algorithm is found to be more time consuming. The search capability of Genetic Algorithms in finding the required combination of several input factors for any optimized problem fascinated to apply GA for generating test patterns as generating the test pattern is also similar to finding the required vector out of several input transitions. Initially the GA is applied for generating test patterns for stuck-at faults and compared the results with PODEM algorithm. As the fault coverage is almost similar to the deterministic algorithm PODEM, the GA developed for stuck-at faults is extended to find test patterns for crosstalk faults between single aggressor and single victim. The elitist GA is also applied for a few ISCAS 85 benchmark circuits. Later the algorithm is extended to generate test patterns for worst-case crosstalk faults. It has been proved that elitist GA developed in this thesis is also very useful in generating test patterns for crosstalk faults especially for multiple aggressor and single victim crosstalk faults