Assessing the impact of modeling limits on intelligent systems

The knowledge bases underlying intelligent systems are validated. A general conceptual framework is provided for considering the roles in intelligent systems of models of physical, behavioral, and operational phenomena. A methodology is described for identifying limits in particular intelligent systems, and the use of the methodology is illustrated via an experimental evaluation of the pilot-vehicle interface within the Pilot's Associate. The requirements and functionality are outlined for a computer based knowledge engineering environment which would embody the approach advocated and illustrated in earlier discussions. Issues considered include the specific benefits of this functionality, the potential breadth of applicability, and technical feasibility

The Parametric Aircraft Noise Analysis Module - status overview and recent applications

The German Aerospace Center (DLR) is investigating aircraft noise prediction and noise reduction capabilities. The Parametric Aircraft Noise Analysis Module (PANAM) is a fast prediction tool by the DLR Institute of Aerodynamics and Flow Technology to address overall aircraft noise. It was initially developed to (1) enable comparative design studies with respect to overall aircraft ground noise and to (2) indentify promising low-noise technologies at early aircraft design stages. A brief survey of available and established fast noise prediction codes is provided in order to rank and classify PANAM among existing tools. PANAM predicts aircraft noise generated during arbitrary 3D approach and take-off flight procedures. Noise generation of an operating aircraft is determined by its design, the relative observer position, configuration settings, and operating condition along the flight path. Feasible noise analysis requires a detailed simulation of all these dominating effects. Major aircraft noise components are simulated with individual models and interactions are neglected. Each component is simulated with a separate semi-empirical and parametric noise source model. These models capture major physical effects and correlations yet allow for fast and accurate noise prediction. Sound propagation and convection effects are applied to the emitting noise source in order to transfer static emission into aircraft ground noise impact with respect to the actual flight operating conditions. Recent developments and process interfaces are presented and prediction results are compared with experimental data recorded during DLR flyover noise campaigns with an Airbus A319 (2006), a VFW-614 (2009), and a Boeing B737-700 (2010). Overall, dominating airframe and engine noise sources are adequately modeled and overall aircraft ground noise levels can sufficiently be predicted. The paper concludes with a brief overview on current code applications towards selected noise reduction technologies

Studies of planning behavior of aircraft pilots in normal, abnormal and emergency situations

A methodology for the study of planning is presented and the results of applying the methodology within two experimental investigations of planning behavior of aircraft pilots in normal, abnormal, and emergency situations are discussed. Beyond showing that the methodology yields consistent results, these experiments also lead to concepts in terms of a dichotomy between event driven and time driven planning, subtle effects of automation on planning, and the relationship of planning to workload and flight performance

Magnetorheological landing gear: 1. A design methodology

Aircraft landing gears are subjected to a wide range of excitation conditions, which result in conflicting damping requirements. A novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids. This paper presents a design methodology that enables an MR landing gear to be optimized, both in terms of its damping and magnetic circuit performance, whilst adhering to stringent packaging constraints. Such constraints are vital in landing gear, if MR technology is to be considered as feasible in commercial applications. The design approach focuses on the impact or landing phase of an aircraft's flight, where large variations in sink speed, angle of attack and aircraft mass makes an MR device potentially very attractive. In this study, an equivalent MR model of an existing aircraft landing gear is developed. This includes a dynamic model of an MR shock strut, which accounts for the effects of fluid compressibility. This is important in impulsive loading applications such as landing gear, as fluid compression will reduce device controllability. Using the model, numerical impact simulations are performed to illustrate the performance of the optimized MR shock strut, and hence the effectiveness of the proposed design methodology. Part 2 of this contribution focuses on experimental validation

Flight testing the fixed-wing configuration of the Rotor Systems Research Aircraft (RSRA)

The Rotor Systems Research Aircraft (RSRA) is a unique research aircraft designed to flight test advanced helicopter rotor system. Its principal flight test configuration is as a compound helicopter. The fixed wing configuration of the RSRA was primarily considered an energy fly-home mode in the event it became necessary to sever an unstable rotor system in flight. While it had always been planned to flight test the fixed wing configuration, the selection of the RSRA as the flight test bed for the X-wing rotor accelerated this schedule. This paper discusses the build-up to, and the test of, the RSRA fixed wing configuration. It is written primarily from the test pilot's perspective

Critical soft landing technology issues for future US space missions

A programmatic need for research and development to support parachute-based landing systems has not existed since the end of the Apollo missions in the mid-1970s. Now, a number of planned space programs require advanced landing capabilities for which the experience and technology base does not currently exist. New requirements for landing on land with controllable, gliding decelerators and for more effective impact attenuation devices justify a renewal of the landing technology development effort that existed during the Mercury, Gemini, and Apollo programs. A study was performed to evaluate the current and projected national capability in landing systems and to identify critical deficiencies in the technology base required to support the Assured Crew Return Vehicle and the Two-Way Manned Transportation System. A technology development program covering eight landing system performance issues is recommended