AN INTEGRATED MULTI-FUNCTIONAL MICROFLUIDICDEVICE WITH PUMPING, PARTICLE SORTING,AND MIXING FUNCTIONS

Currently, multiple functions are performed in microfluidic devices in a separate manner or in a manner that needs unnecessary transportation from one location, where one function is performed, to another, where another function is performed. There is a need to integrate these functions holistically to eliminate unnecessary steps and improve the performance of microfluidic system. This thesis was devoted to design and fabricate a microfluidic device that allows pumping, mixing, and particle separating functions to be performed simultaneously (or by eliminating any unnecessary transportation). A design concept by introducing membranes into microfluidic devices was proposed based on Axiomatic design theory. Simulation was performed via the multi-physics software COMSOL and was validated with acceptable accuracy by experiments. The UV light lithography and soft lithography were employed to fabricate the device. A microfluidic device consisting of a main channel height of 50 μm, a main channel width of 30 μm, and membranes with a thickness of 10 μm, lengths of 300 μm and 200 μm was fabricated using Polydimethylsiloxane (PDMS). The experiments were conducted to test the feasibility of the expected functions. The microbeads with diameters of 15 μm, 3 μm, and 200 nm were used to mimic the circulating tumor cells (CTC), normal blood cells and anti-cancer drugs, respectively. The experiment demonstrated the device effectiveness in terms of the mixing and particle separating functions. Unfortunately, the pumping function was not measured with the instrument available. There are two main contributions. First, in the field of microfluidics, especially microfluidic device technology, the device is novel to the best of the author’s knowledge. Existing devices perform more than one function but have a distinct time stamp to each of the functions and unnecessary transportations between each function unit. Second, in the field of biomedical engineering, this thesis provides a proof that the size- and deflection-based principle to separate two groups of particles, CTCs from the blood stream in this case, is working. Subsequently, it is promising to further shape it to a practically viable device to separate CTCs from the blood stream

Analysis, Design and Fabrication of Micromixers

This book includes an editorial and 12 research papers on micromixers collected from the Special Issue published in Micromachines. The topics of the papers are focused on the design of micromixers, their fabrication, and their analysis. Some of them proposed novel micromixer designs. Most of them deal with passive micromixers, but two papers report studies on electrokinetic micromixers. Fully three-dimensional (3D) micromixers were investigated in some cases. One of the papers applied optimization techniques to the design of a 3D micromixer. A review paper is also included and reports a review of recently developed passive micromixers and a comparative analysis of 10 typical micromixers

Frequency-controlled wireless passive microfluidic devices

Microfluidics is a promising technology that is increasingly attracting the attention of researchers due to its high efficiency and low-cost features. Micropumps, micromixers, and microvalves have been widely applied in various biomedical applications due to their compact size and precise dosage controllability. Nevertheless, despite the vast amount of research reported in this research area, the ability to implement these devices in portable and implantable applications is still limited. To date, such devices are constricted to the use of wires, or on-board power supplies, such as batteries. This thesis presents novel techniques that allow wireless control of passive microfluidic devices using an external radiofrequency magnetic field utilizing thermopneumatic principle. Three microfluidic devices are designed and developed to perform within the range of implantable drug-delivery devices. To demonstrate the wireless control of microfluidic devices, a wireless implantable thermopneumatic micropump is presented. Thermopneumatic pumping with a maximum flow rate of 2.86 μL/min is realized using a planar wirelessly-controlled passive inductor-capacitor heater. Then, this principle was extended in order to demonstrate the selective wireless control of multiple passive heaters. A passive wirelessly-controlled thermopneumatic zigzag micromixer is developed as a mean of a multiple drug delivery device. A maximum mixing efficiency of 96.1% is achieved by selectively activating two passive wireless planar inductor-capacitor heaters that have different resonant frequency values. To eliminate the heat associated with aforementioned wireless devices, a wireless piezoelectric normally-closed microvalve for drug delivery applications is developed. A piezoelectric diaphragm is operated wirelessly using the wireless power that is transferred from an external magnetic field. Valving is achieved with a percentage error as low as 3.11% in a 3 days long-term functionality test. The developed devices present a promising implementation of the reported wireless actuation principles in various portable and implantable biomedical applications, such as drug delivery, analytical assays, and cell lysis devices

Passive Micromixers

Micro-total analysis systems and lab-on-a-chip platforms are widely used for sample preparation and analysis, drug delivery, and biological and chemical syntheses. A micromixer is an important component in these applications. Rapid and efficient mixing is a challenging task in the design and development of micromixers. The flow in micromixers is laminar, and, thus, the mixing is primarily dominated by diffusion. Recently, diverse techniques have been developed to promote mixing by enlarging the interfacial area between the fluids or by increasing the residential time of fluids in the micromixer. Based on their mixing mechanism, micromixers are classified into two types: active and passive. Passive micromixers are easy to fabricate and generally use geometry modification to cause chaotic advection or lamination to promote the mixing of the fluid samples, unlike active micromixers, which use moving parts or some external agitation/energy for the mixing. Many researchers have studied various geometries to design efficient passive micromixers. Recently, numerical optimization techniques based on computational fluid dynamic analysis have been proven to be efficient tools in the design of micromixers. The current Special Issue covers new mechanisms, design, numerical and/or experimental mixing analysis, and design optimization of various passive micromixers

Micromixers-a review

Abstract This review reports the progress on the recent development of micromixers. The review first presents the different micromixer types and designs. Micromixers in this review are categorized as passive micromixers and active micromixers. Due to the simple fabrication technology and the easy implementation in a complex microfluidic system, passive micromixers will be the focus of this review. Next, the review discusses the operation points of the micromixers based on characteristic dimensionless numbers such as Reynolds number Re, Peclet number Pe, and in dynamic cases the Strouhal number St. The fabrication technologies for different mixer types are also analysed. Quantification techniques for evaluation of the performance of micromixers are discussed. Finally, the review addresses typical applications of micromixers

Analysis, Design and Fabrication of Micromixers, Volume II

Micromixers are an important component in micrototal analysis systems and lab-on-a-chip platforms which are widely used for sample preparation and analysis, drug delivery, and biological and chemical synthesis. The Special Issue "Analysis, Design and Fabrication of Micromixers II" published in Micromachines covers new mechanisms, numerical and/or experimental mixing analysis, design, and fabrication of various micromixers. This reprint includes an editorial, two review papers, and eleven research papers reporting on five active and six passive micromixers. Three of the active micromixers have electrokinetic driving force, but the other two are activated by mechanical mechanism and acoustic streaming. Three studies employs non-Newtonian working fluids, one of which deals with nano-non-Newtonian fluids. Most of the cases investigated micromixer design

DESIGN AND MIXING PERFORMANCE OF PASSIVE MICROMIXERS: A CRITICAL REVIEW

This study extracts and reports notable findings on passive micromixers by conducting an exhaustive review of designs, their features, and mixing performance. The study has covered the relevant articles on passive micromixers published from 2010 to 2020. The analysis of filtered and selected articles sums up passive micromixers into four categories: designed inlets, designed mixing-channel, lamination-based, and flow obstacles-based. The prominent mixing channel categories identified in the study are split-and-recombine (SAR), convergent-divergent (C-D), and mixed (SAR, C-D, and others). Moreover, differences in mixing channel designs, number of inlets, and evaluation methods have been used in comparing the mixing performance of passive micromixers. The SAR and the obstacles-based micromixers were found to outperform the others. The designs covered in the present review show significant improvements in the mixing index. However, these studies were conducted in an isolated environment, and most of the time, their fabrication and device integration issues were ignored. The assortment and critical analysis of micromixers based on their design features and flow parameters will be helpful to researchers interested in designing new passive micromixers for microfluidic applications

VIABILITY OF A CONTROLLABLE CHAOTIC MICROMIXER THROUGH THE USE OF TITANIUM-NICKEL SHAPE MEMORY ALLOY

Microfluidic devices have found applications in a number of areas, such as medical analysis, chemical synthesis, biological study, and drug delivery. Because of the small channel dimensions used in these systems, most microchannels exhibit laminar flow due to their low Reynold’s number, making mixing of fluids very challenging. Mixing at this size scale is diffusion-limited, so inducing chaotic flow patterns can increase the interface surface area between two fluids, thereby decreasing overall mixing time. One method to create a chaotic flow within the channel is through the introduction of internal protrusions into the channel. In such an application protrusions that create a rotational flow within the channel are preferred due to their effectiveness in folding the two fluids over one another. The novel mixer outlined in this paper uses a Ti-Ni shape memory alloy for the creation of protrusions that can be turned controlled through material temperature. Controllability of the alloy allows users to turn the chaotic flow created by the protrusions off and on by varying the temperature of the mixer. This ability contributes to the idea of a continuous microfluidic system that can be turned on only when necessary as well as recycle unmixed fluids while turned off

Design and Simulation of an Electrostatically-Driven MEMS Micro-Mixer

Bio MEMS ( Biology Micro-electro-mechanical Systems) focus on some micro-fabricated devices including electrical and mechanical parts to study the biological system such as new polymer-based drug delivery systems for anti-cancer agents, specialized tools for minimally invasive surgery, novel cell sorting systems for high-throughput data collection, and precision measurement techniques enabled by micro-fabricated devices. Especially some micro-liquid handling devices like micro-pumps, active and passive micro-mixers that can make two or more micro-fluids mixing completely, with the chaotic advection. This kind of rapid mixing is very important in the biochemistry analysis, drug delivery and sequencing or synthesis of nucleic acids. Besides, some biological processes like cell activation, enzyme reactions and protein folding also require mixing of reactants for initiation, electrophoresis activation. Turbulence and inter-diffusion of them play crucial role in the process of mixing of different fluids. In this report, it will introduce a new kind of electromechanical active micro-mixer, which includes two inlets and one outlet under the electrostatic driven voltage. Two different fluids will enter the micro-mixer and shows different colors separately blue and red. Choosing the ANSYS for the simulation of the fluids running in the micro-mixers, we can see nearly 100% fluids that have been mixed. ANSYS is used to show the effectiveness of the micro-mixer