203,405 research outputs found
Modeling the implementation of advanced manufacturing technologies in the Cypriot manufacturing industry
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.For the Cyprus Manufacturing Industry, previously committed to the production of medium quality standard products, the increased and changing nature of competitive pressures represents a fundamental challenge. The major problems the Cyprus manufacturing industry is facing appear to be labour shortages, together with low product competitiveness and poor production organization. It is widely believed that the introduction of Advanced Manufacturing technologies (AMTs) offers a means of resolving the above problems but their implementation is a risky venture. The main objective of the study was to examine the implementation of AMTs in the Cyprus Manufacturing Industry, identify the factors leading to successful application of these technologies and based on these factors develop an integrated process plan to facilitate their successful implementation.
A survey was conducted on a sample of 40 companies using personal interviews based on a purpose designed comprehensive questionnaire. The questionnaire encompassed the international trends in the management and implementation of AMT.
Successes and failures have been considered in terms of the Technical, Manufacturing and the Business aspects and influences of each technology. It has been found that the most important factors contributing to the successful implementation of AMT were the level of long term planning, the fitness level of AMT in the existing processes and the attention given to infrastructure preparation and human resource development.
Based on the success factors identified an integrated planning model has been developed. The model incorporates all the planning procedures and implementation parameters to be followed in order to ensure successful AMT adoption and implementation. The model addresses the three main stages of AMT adoption and implementation: (a) the planning phase, (b) the selection, transfer and pre-implementation phase and (c) the post implementation phase. For each phase the steps to be followed are fully explored and analysed. Finally the usefulness of the model in facilitating the successful application of AMT is illustrated through two case studies
Information systems evaluation: Navigating through the problem domain
Information systems (IS) make it possible to improve organizational efficiency and effectiveness, which can provide
competitive advantage. There is, however, a great deal of difficulty reported in the normative literature when it comes to the
evaluation of investments in IS, with companies often finding themselves unable to assess the full implications of their IS
infrastructure. Although many of the savings resulting from IS are considered suitable for inclusion within traditional
accountancy frameworks, it is the intangible and non-financial benefits, together with indirect project costs that complicate the
justification process. In exploring this phenomenon, the paper reviews the normative literature in the area of IS evaluation, and
then proposes a set of conjectures. These were tested within a case study to analyze the investment justification process of a
manufacturing IS investment. The idiosyncrasies of the case study and problems experienced during its attempts to evaluate,
implement, and realize the holistic implications of the IS investment are presented and critically analyzed. The paper
concludes by identifying lessons learnt and thus, proposes a number of empirical findings for consideration by decisionmakers
during the investment evaluation process
A comparison of processing techniques for producing prototype injection moulding inserts.
This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM.
PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer.
The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used.
The parts produced from the three processing methods are investigated and their respective merits and issues are
discussed
Pembangunan Modul Pengajaran Kendiri (MPK) keusahawanan dalam topik isu keusahawanan bagi pelajar diploma di politeknik
Terdapat pelbagai kaedah pembelajaran yang telah diperkenalkan termasuklah
kaedah pembelajaran yang menggunakan pendekatan pembelajaran bermodul secara
kendiri. Kajian ini adalah bertujuan untuk mengkaji kesesuaian Modul Pengajaran
Kendiri Keusahawanan dalam topik Isu Keusahawanan yang telah dihasilkan bagi
pelajar yang mengikuti pengajian Diploma di Jabatan Perdagangan Politeknik. Antara
aspek yang dikaji ialah untuk menilai sama ada rekabentuk modul yang dihasilkan dapat
memenuhi ciri-ciri modul yang baik, MPK yang dihasilkan dapat membantu mencapai
objektif pembelajaran, MPK ini bersifat mesra pengguna dan MPK yang dihasilkan
membantu pensyarah menyampaikan pengajarannya dengan lebih berkesan. Kajian ini
dilakukan ke atas 110 orang pelajar semester en am yang mengikuti pengajian diploma
dan 4 orang pensyarah yang mengajar subjek Keusahawanan di Jabatan Perdagangan
Politeknik Sultan Salahuddin Abdul Aziz Shah, Selangor. Kaedah analisa data yang
digunakan dalam kajian ini ialah skor min dan peratus. Hasil daripada kajian ini
menunjukkan bahawa rekabentuk modul yang dihasilkan memenuhi ciri-ciri modul
yang baik, MPK ini membantu untuk mencapai objektif pembelajaran, MPK ini
bersifat mesra pengguna dan MPK yang dihasilkan dapat membantu pensyarah
menyampaikan pengajarannya dengan lebih berkesan. Ini bermakna secara
keseluruhannya, hasil kajian menunjukkan bahawa modul yang dihasilkan oleh pengkaji
adalah sesuai digunakan oleh pelajar-pelajar semester enam yang mengikuti pengajian
diploma di Jabatan Perdagangan peringkat politeknik. Seterusnya, beberapa pandangan
telah dikemukakan bagi meningkatkan rnutu dan kualiti MPK yang dihasilkan. Semoga
kajian ini dapat memberi manfaat kepada mereka yang terlibat dalam bidang
pendidikan
Reducing risk in pre-production investigations through undergraduate engineering projects.
This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects
in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level.
The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor.
The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits.
The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process
ARMD Workshop on Materials and Methods for Rapid Manufacturing for Commercial and Urban Aviation
This report documents the goals, organization and outcomes of the NASA Aeronautics Research Mission Directorates (ARMD) Materials and Methods for Rapid Manufacturing for Commercial and Urban Aviation Workshop. The workshop began with a series of plenary presentations by leaders in the field of structures and materials, followed by concurrent symposia focused on forecasting the future of various technologies related to rapid manufacturing of metallic materials and polymeric matrix composites, referred to herein as composites. Shortly after the workshop, questionnaires were sent to key workshop participants from the aerospace industry with requests to rank the importance of a series of potential investment areas identified during the workshop. Outcomes from the workshop and subsequent questionnaires are being used as guidance for NASA investments in this important technology area
Human-automation collaboration in manufacturing: identifying key implementation factors
Human-automation collaboration refers to the concept of human operators and intelligent automation working together interactively within the same workspace without conventional physical separation. This concept has commanded significant attention in manufacturing because of the potential applications, such as the installation of large sub-assemblies. However, the key human factors relevant to human-automation collaboration have not yet been fully investigated. To maximise effective implementation and reduce development costs for future projects these factors need to be examined. In this paper, a collection of human factors likely to influence human-automation collaboration are identified from current literature. To test the validity of these and explore further factors associated with implementation success, different types of production processes in terms of stage of maturity are being explored via industrial case studies from the project’s stakeholders. Data was collected through a series of semi-structured interviews with shop floor operators, engineers, system designers and management personnel
A Case Study Of E-Supply Chain & Business Process Reengineering Of A Semiconductor Company In Malaysia
Penglibatan e-perniagaan dalam rantaian bekalan telah mewujudkan e-rantaian bekalan yang baru (e-SC) di
firma-firma tempatan dan global.
Due to globalization and advancement in information technology (IT), companies adopt best practices in
e-business and supply chain management to be globally competitive as both are realities and prospects in 21st century
Recommended from our members
Rapid manufacturing as a tool for agile manufacturing: applications and implementation perspectives
Manufacturing engineers and technologists around the globe are already well familiar with manufacturing methodologies and systems developments in the last part of the twentieth century. Many are probably also familiar with the current state of Rapid Prototyping (RP) technologies, especially in the areas of concept model making and prototype development. They may not however, be so familiar with the more recent developments of these technologies towards Rapid Manufacturing (RM) and the directions which the applications of RM technologies are taking for agile manufacturing purposes in particular. This paper critically reviews the various technologies currently available, outlines development trends in RM, discusses the approach, application and implementation perspectives by which these RM technologies are applied for increasing agility and responsiveness in manufacturing. Furthermore, the paper describes two case study examples to further illustrate the application scenarios in agile manufacturing before concluding remarks
The challenges for sustainable skills development in the UK automotive supply sector: policy and implementation
Original paper can be found at: http://www.gerpisa.univ-evry.fr/rencontre/16.rencontre/GERPISAJune2008/home.htmlThe European Automotive industry is a key strategic player in the European Union with an estimated 10 million workers. The majority of these work in the supply chain (CLEPA 2005). As a major employer, the sector must work to maintain its competitive edge if it is to keep that workforce engaged.Final Accepted Versio
- …