On relay user equipment activation in beyond 5G radio access networks

This paper envisages a Beyond 5G (B5G) Radio Access Network (RAN) in which the relaying capabilities offered by user equipment (UE) are used as a way to improve the coverage and robustness of the network. The paper proposes and develops the functional framework for supporting the activation of the suitable relay UEs (RUEs) in coverage constrained scenarios. It is based on characterizing each potential RUE through a utility metric that measures the coverage enhancements brought to the network when the RUE is activated. To derive this metric for all the candidate RUEs, the framework considers the use of a Network Digital Twin that allows the offline analysis of different configurations in a fast and safe way. Using the proposed framework, a RUE activation algorithm is proposed and evaluated. The obtained results reflect that significant outage probability reductions can be obtained in the scenario under different traffic distributions thanks to the activation of the RUEs with the highest utility.This paper is part of ARTIST project (ref. PID2020- 115104RB-I00) funded by MCIN/AEI/10.13039/ 501100011033. The work is also funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union - NextGenerationEU under project OPTIMAIX_NDT (Ref. TSI-063000-2021-35).Peer ReviewedPostprint (author's final draft

Leveraging user equipment for radio access network augmentation

Along the successive generations, mobile network infrastructure deployments have required continuous expansion and upgrades to respond to the ever increasing traffic demand. At the same time, user equipment (UE) has evolved with the introduction of powerful and advanced communication and computational capabilities. Moreover, several industrial initiatives are promoting the principles of RAN disaggregation through the split of RAN functionalities among multiple interoperable components in contrast to traditional monolithic solutions. Embracing these trends, this paper presents the vision of a Beyond 5G (B5G) scenario where the UE takes a more active role in the communication service provisioning and is used to augment the RAN infrastructure as a source of distributed capacity and network intelligence. This is expected to bring benefits for Mobile Network Operators by reducing the number of base stations to deploy and by providing the RAN with a new degree of flexibility for smartly and dynamically adapting the RAN to the specific needs. In this direction, after discussing the main enabling technologies of the envisaged RAN augmentation concept, this paper presents a simulation-based assessment to quantify the performance improvements and the achievable savings in terms of infrastructure deployment.This paper is part of ARTIST project (ref. PID2020- 115104RB-I00) funded by MCIN/AEI/10.13039/ 501100011033.Peer ReviewedPostprint (author's final draft

On the value of context awareness for relay activation in beyond 5G radio access networks

This paper envisions to augment the Radio Access Network (RAN) infrastructure in Beyond 5G(B5G) systems by exploiting relaying capabilities of user equipment (UE) as a way to improve the coverage, capacity and robustness. Despite the concept and enabling technologies have been in place for some time, their efficient realization requires the conception and development of new features in B5G systems. Among them, this paper focuses on the Relay UE (RUE) activation decision making, in charge of deciding where and when a UE is suitable to be activated to relay traffic from other UEs. Specifically, the paper analyses seven RUE activation strategies that differ on the criteria and the type of context information considered for this decision-making problem. The considered strategies are evaluated through system level simulations in a realistic urban scenario with the objective of assessing the value of each type of context information. Results reveal that the most efficient strategies from the perspective of outage probability reduction are those that account for the number of UEs that would be served by a RUE based on the experienced spectral efficiency.This paper is part of ARTIST project (ref. PID2020-115104RB-I00) funded by MCIN/AEI/10.13039/ 501100011033.Peer ReviewedPostprint (author's final draft

Handover management strategies in LTE-advanced heterogeneous networks.

Doctoral Degree. University of KwaZulu-Natal, Durban.Meeting the increasing demand for data due to the proliferation of high-specification mobile devices in the cellular systems has led to the improvement of the Long Term Evolution (LTE) framework to the LTE-Advanced systems. Different aspects such as Massive Multiple-Input Multiple Output (MIMO), Orthogonal Frequency Division Multiple Access (OFDMA), heterogeneous networks and Carrier Aggregation have been considered in the LTE-Advanced to improve the performance of the system. The small cells like the femtocells and the relays play a significant role in increasing the coverage and the capacity of the mobile cellular networks in LTE-Advanced (LTE-A) heterogeneous network. However, the user equipment (UE) are faced with the frequent handover problems in the heterogeneous systems than the homogeneous systems due to the users‟ mobility and densely populated cells. The objective of this research work is to analyse the handover performance in the current LTE/LTE-A network and to propose various handover management strategies to handle the frequent handover problems in the LTE-Advance heterogeneous networks. To achieve this, an event driven simulator using C# was developed based on the 3GPP LTE/LTE-A standard to evaluate the proposed strategies. To start with, admission control which is a major requirement during the handover initiation stage is discussed and this research work has therefore proposed a channel borrowing admission control scheme for the LTE-A networks. With this scheme in place, resources are better utilized and more calls are accepted than in the conventional schemes where the channel borrowing is not applied. Also proposed is an enhanced strategy for the handover management in two-tier femtocell-macrocell networks. The proposed strategy takes into consideration the speed of user and other parameters in other to effectively reduce the frequent and unnecessary handovers, and as well as the ratio of target femtocells in the system. We also consider scenarios such as the one that dominate the future networks where femtocells will be densely populated to handle very heavy traffic. To achieve this, a Call Admission Control (CAC)-based handover management strategy is proposed to manage the handover in dense femtocell-macrocell integration in the LTE-A network. The handover probability, the handover call dropping probability and the call blocking probability are reduced considerably with the proposed strategy. Finally, the handover management for the mobile relays in a moving vehicle is considered (using train as a case study). We propose a group handover strategy where the Mobile Relay Node (MRN) is integrated with a special mobile device called “mdev” to prepare the group information prior to the handover time. This is done to prepare the UE‟s group information and services for timely handover due to the speed of the train. This strategy reduces the number of handovers and the call dropping probability in the moving vehicle.Publications and conferences listed on page iv-v

Energy Efficient and Cooperative Solutions for Next-Generation Wireless Networks

Energy efficiency is increasingly important for next-generation wireless systems due to the limited battery resources of mobile clients. While fourth generation cellular standards emphasize low client battery consumption, existing techniques do not explicitly focus on reducing power that is consumed when a client is actively communicating with the network. Based on high data rate demands of modern multimedia applications, active mode power consumption is expected to become a critical consideration for the development and deployment of future wireless technologies. Another reason for focusing more attention on energy efficient studies is given by the relatively slow progress in battery technology and the growing quality of service requirements of multimedia applications. The disproportion between demanded and available battery capacity is becoming especially significant for small-scale mobile client devices, where wireless power consumption dominates within the total device power budget. To compensate for this growing gap, aggressive improvements in all aspects of wireless system design are necessary. Recent work in this area indicates that joint link adaptation and resource allocation techniques optimizing energy efficient metrics can provide a considerable gain in client power consumption. Consequently, it is crucial to adapt state-of-the-art energy efficient approaches for practical use, as well as to illustrate the pros and cons associated with applying power-bandwidth optimization to improve client energy efficiency and develop insights for future research in this area. This constitutes the first objective of the present research. Together with energy efficiency, next-generation cellular technologies are emphasizing stronger support for heterogeneous multimedia applications. Since the integration of diverse services within a single radio platform is expected to result in higher operator profits and, at the same time, reduce network management expenses, intensive research efforts have been invested into design principles of such networks. However, as wireless resources are limited and shared by clients, service integration may become challenging. A key element in such systems is the packet scheduler, which typically helps ensure that the individual quality of service requirements of wireless clients are satisfied. In contrastingly different distributed wireless environments, random multiple access protocols are beginning to provide mechanisms for statistical quality of service assurance. However, there is currently a lack of comprehensive analytical frameworks which allow reliable control of the quality of service parameters for both cellular and local area networks. Providing such frameworks is therefore the second objective of this thesis. Additionally, the study addresses the simultaneous operation of a cellular and a local area network in spectrally intense metropolitan deployments and solves some related problems. Further improving the performance of battery-driven mobile clients, cooperative communications are sought as a promising and practical concept. In particular, they are capable of mitigating the negative effects of fading in a wireless channel and are thus expected to enhance next-generation cellular networks in terms of client spectral and energy efficiencies. At the cell edges or in areas missing any supportive relaying infrastructure, client-based cooperative techniques are becoming even more important. As such, a mobile client with poor channel quality may take advantage of neighboring clients which would relay data on its behalf. The key idea behind the concept of client relay is to provide flexible and distributed control over cooperative communications by the wireless clients themselves. By contrast to fully centralized control, this is expected to minimize overhead protocol signaling and hence ensure simpler implementation. Compared to infrastructure relay, client relay will also be cheaper to deploy. Developing the novel concept of client relay, proposing simple and feasible cooperation protocols, and analyzing the basic trade-offs behind client relay functionality become the third objective of this research. Envisioning the evolution of cellular technologies beyond their fourth generation, it appears important to study a wireless network capable of supporting machine-to-machine applications. Recent standardization documents cover a plethora of machine-to-machine use cases, as they also outline the respective technical requirements and features according to the application or network environment. As follows from this activity, a smart grid is one of the primary machine-to-machine use cases that involves meters autonomously reporting usage and alarm information to the grid infrastructure to help reduce operational cost, as well as regulate a customer's utility usage. The preliminary analysis of the reference smart grid scenario indicates weak system architecture components. For instance, the large population of machine-to-machine devices may connect nearly simultaneously to the wireless infrastructure and, consequently, suffer from excessive network entry delays. Another concern is the performance of cell-edge machine-to-machine devices with weak wireless links. Therefore, mitigating the above architecture vulnerabilities and improving the performance of future smart grid deployments is the fourth objective of this thesis. Summarizing, this thesis is generally aimed at the improvement of energy efficient properties of mobile devices in next-generation wireless networks. The related research also embraces a novel cooperation technique where clients may assist each other to increase per-client and network-wide performance. Applying the proposed solutions, the operation time of mobile clients without recharging may be increased dramatically. Our approach incorporates both analytical and simulation components to evaluate complex interactions between the studied objectives. It brings important conclusions about energy efficient and cooperative client behaviors, which is crucial for further development of wireless communications technologies