5G standalone network's reliability, one-way latency and packet loss rate analysis for URLLC implementation

5G is the fifth generation technology standard for cellular networks. It has three main application demands, which are Enhanced Mobile Broadband (EMBB), Massive Machine-Type Communications (MMTC) and Ultra-Reliable Low-Latency Communications (URLLC). URLLC is a very challenging demand to implement, with strict reliability and latency requirements. It has been highly specified by 2022 and 5G vendors are starting to implement basic URLLC features in the near future. The motivation for this thesis is to find ways to make measurements on how a 5G standalone (SA) network performs on key URLLC performance indicators, analyse and visualize these measurements, find reasons for certain network behavior and make estimates on what kind of impact different URLLC features will have when implemented. Furthermore, another motivation is to find a way to detect packet loss and reasons behind it, because packet loss impairs reliability significantly and should be minimized before deploying URLLC features. To measure 5G SA network's performance, four different kind of test cases were identified, in which URLLC type of network traffic is generated. There are static tests done in good coverage and bad coverage from the 5G cell, and mobility tests done by moving from good coverage to bad coverage while attached to the same 5G cell, and a handover test in which the 5G cell is changed. All tests are done in a 5G field verification environment, for both downlink and uplink. For downlink, coverage and mobility inside a cell did not have a meaningful impact to one-way latency. This was mainly because there was no need for packet retransmissions, which would have increased latency. This is promising especially for mobility URLLC use cases such as Vehicle-To-Everything communications (V2X). Uplink performed much weaker, mainly because of uplink resource scheduling and packet retransmissions. Handover was problematic for both downlink and uplink, because of the brief but massive increase in latency caused by the cell change. All packet loss in the measurements happened in uplink transmission, and this thesis includes a case study where different potential factors causing packet loss were consistently eliminated. In the end, the cause for packet loss indicates towards the 5G chipset used for the tests

Positioning of High-speed Trains using 5G New Radio Synchronization Signals

We study positioning of high-speed trains in 5G new radio (NR) networks by utilizing specific NR synchronization signals. The studies are based on simulations with 3GPP-specified radio channel models including path loss, shadowing and fast fading effects. The considered positioning approach exploits measurement of Time-Of-Arrival (TOA) and Angle-Of-Departure (AOD), which are estimated from beamformed NR synchronization signals. Based on the given measurements and the assumed train movement model, the train position is tracked by using an Extended Kalman Filter (EKF), which is able to handle the non-linear relationship between the TOA and AOD measurements, and the estimated train position parameters. It is shown that in the considered scenario the TOA measurements are able to achieve better accuracy compared to the AOD measurements. However, as shown by the results, the best tracking performance is achieved, when both of the measurements are considered. In this case, a very high, sub-meter, tracking accuracy can be achieved for most (>75%) of the tracking time, thus achieving the positioning accuracy requirements envisioned for the 5G NR. The pursued high-accuracy and high-availability positioning technology is considered to be in a key role in several envisioned HST use cases, such as mission-critical autonomous train systems.Comment: 6 pages, 5 figures, IEEE WCNC 2018 (Wireless Communications and Networking Conference

D6.3 Intermediate system evaluation results

The overall purpose of METIS is to develop a 5G system concept that fulfil s the requirements of the beyond-2020 connected information society and to extend today’s wireless communication systems for new usage cases. First, in this deliverable an updated view on the overall METIS 5G system concept is presented. Thereafter, simulation results for the most promising technology components supporting the METIS 5G system concept are reported. Finally, s imulation results are presented for one relevant aspect of each Horizontal Topic: Direct Device - to - Device Communication, Massive Machine Communication, Moving Networks, Ultra - Dense Networks, and Ultra - Reliable Communication.Popovski, P.; Mange, G.; Fertl, P.; Gozálvez - Serrano, D.; Droste, H.; Bayer, N.; Roos, A.... (2014). D6.3 Intermediate system evaluation results. http://hdl.handle.net/10251/7676

Incast mitigation in a data center storage cluster through a dynamic fair-share buffer policy

Incast is a phenomenon when multiple devices interact with only one device at a given time. Multiple storage senders overflow either the switch buffer or the single-receiver memory. This pattern causes all concurrent-senders to stop and wait for buffer/memory availability, and leads to a packet loss and retransmission—resulting in a huge latency. We present a software-defined technique tackling the many-to-one communication pattern—Incast—in a data center storage cluster. Our proposed method decouples the default TCP windowing mechanism from all storage servers, and delegates it to the software-defined storage controller. The proposed method removes the TCP saw-tooth behavior, provides a global flow awareness, and implements the dynamic fair-share buffer policy for end-to-end I/O path. It considers all I/O stages (applications, device drivers, NICs, switches/routers, file systems, I/O schedulers, main memory, and physical disks) while achieving the maximum I/O throughput. The policy, which is part of the proposed method, allocates fair-share bandwidth utilization for all storage servers. Priority queues are incorporated to handle the most important data flows. In addition, the proposed method provides better manageability and maintainability compared with traditional storage networks, where data plane and control plane reside in the same device

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&