Energy consumption management in Smart Homes: An M-Bus communication system

Energy consumption management in Smart Home environments relies on the implementation of systems of cooperative intelligent objects named Smart Meters. In order for devices to cooperate to smart metering applications' execution, they need to make their information available. In this paper we propose a framework that aims at managing energy consumption of controllable appliances in groups of Smart Homes belonging to the same neighbourhood or condominium. We consider not only electric power distribution, but also alternative energy sources such as solar panels. We define a communication paradigm based on M-Bus for the acquisition of relevant data by managing nodes. We also provide a lightweight algorithm for the distribution of the available alternative power among houses. Performance evaluation of experiments in simulation mode prove that the proposed framework does not jeopardise the lifetime of Smart Meters, particularly in typical situations where managed devices do not continuously turn on and off

A novel mechanical analogy based battery model for SoC estimation using a multi-cell EKF

The future evolution of technological systems dedicated to improve energy efficiency will strongly depend on effective and reliable Energy Storage Systems, as key components for Smart Grids, microgrids and electric mobility. Besides possible improvements in chemical materials and cells design, the Battery Management System is the most important electronic device that improves the reliability of a battery pack. In fact, a precise State of Charge (SoC) estimation allows the energy flows controller to exploit better the full capacity of each cell. In this paper, we propose an alternative definition for the SoC, explaining the rationales by a mechanical analogy. We introduce a novel cell model, conceived as a series of three electric dipoles, together with a procedure for parameters estimation relying only on voltage measures and a given current profile. The three dipoles represent the quasi-stationary, the dynamics and the istantaneous components of voltage measures. An Extended Kalman Filer (EKF) is adopted as a nonlinear state estimator. Moreover, we propose a multi-cell EKF system based on a round-robin approach to allow the same processing block to keep track of many cells at the same time. Performance tests with a prototype battery pack composed by 18 A123 cells connected in series show encouraging results.Comment: 8 page, 12 figures, 1 tabl

Healthy aims: developing new medical implants and diagnostic equipment

Healthy Aims is a €23-million, four-year project, funded under the EU’s Information Society Technology Sixth Framework program to develop intelligent medical implants and diagnostic systems (www.healthyaims.org). The project has 25 partners from 10 countries, including commercial, clinical, and research groups. This consortium represents a combination of disciplines to design and fabricate new medical devices and components as well as to test them in laboratories and subsequent clinical trials. The project focuses on medical implants for nerve stimulation and diagnostic equipment based on straingauge technology

Sealing of silver oxide-zinc storage cells Quarterly report, 23 Sep. - 23 Dec. 1967

Rechargeable micro fuel cells in controlling internal pressure of secondary silver oxide-zinc cells for operation in hermetically sealed conditio

A Three-Step Methodology to Improve Domestic Energy Efficiency

Increasing energy prices and the greenhouse effect lead to more awareness of energy efficiency of electricity supply. During the last years, a lot of technologies have been developed to improve this efficiency. Next to large scale technologies such as windturbine parks, domestic technologies are developed. These domestic technologies can be divided in 1) Distributed Generation (DG), 2) Energy Storage and 3) Demand Side Load Management. Control algorithms optimizing a combination of these techniques can raise the energy reduction potential of the individual techniques. In this paper an overview of current research is given and a general concept is deducted. Based on this concept, a three-step optimization methodology is proposed using 1) offline local prediction, 2) offline global planning and 3) online local scheduling. The paper ends with results of simulations and field tests showing that the methodology is promising.\u

Advances in Repurposing and Recycling of Post-Vehicle-Application Lithium-Ion Batteries

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved through remanufacturing, that the sum of repurposing and remanufacturing capacity is approximately constant across various scenarios encouraging the sharing of resources, and that the need for recycling capacity will be significant by 2030. A repurposing demonstration shows the use of post-vehicle-application batteries to support a semi-portable recycling platform. Energy is collected from solar panels, and dispensed to electrical devices as required. Recycling may be complicated: lithium-ion batteries produced by different manufacturers contain different active materials, particularly for the cathodes. In all cases, however, the collecting foils used in the anodes are copper, and in the cathodes are aluminum. A common recycling process using relatively low acid concentrations, low temperatures, and short time periods was developed and demonstrated

Islanded house operation using a micro CHP

The µCHP is expected as the successor of\ud the conventional high-efficiency boiler producing next to\ud heat also electricity with a comparable overall efficiency.\ud A µCHP appliance saves money and reduces greenhouse\ud gas emission.\ud An additional functionality of the µCHP is using the\ud appliance as a backupgenerator in case of a power outage.\ud The µCHPcould supply the essential loads, the heating and\ud reduce the discomfort up to a certain level. This requires\ud modifications on the µCHP appliance itself as well as on\ud the domestic electricity infrastructure. Furthermore some\ud extra hardware and a control algorithm for load balancing\ud are necessary.\ud Our load balancing algorithm is supposed to start and\ud stop the µCHP and switch off loads if necessary. The first\ud simulation results show that most of the electricity usage\ud is under the maximum generation line, but to reduce the\ud discomfort an electricity buffer is required.\u

Development of single cell protectors for sealed silver-zinc cells, phase 1

A single cell protector (SCP) assembly capable of protecting a single silver-zinc (Ag Zn) battery cell was designed, fabricated, and tested. The SCP provides cell-level protection against overcharge and overdischarge by a bypass circuit. The bypass circuit consists of a magnetic-latching relay that is controlled by the high and low-voltage limit comparators. Although designed specifically for secondary Ag-Zn cells, the SCP is flexible enough to be adapted to other rechargeable cells. Eighteen SCPs were used in life testing of an 18-cell battery. The cells were sealed Ag-Zn system with inorganic separators. For comparison, another 18-cell battery was subjected to identical life test conditions, but with battery-level protection rather than cell-level. An alternative approach to the SCP design in the form of a microprocessor-based system was conceptually designed. The comparison of SCP and microprocessor approaches is also presented and a preferred approach for Ag-Zn battery protection is discussed